NLSV2T240MUTAG

NLSV2T240 2-Bit Dual-Supply Inverting Level Translator The NLSV2T240 is a 2-bit configurable dual-supply voltage level translator. The input An and output Bn ports are designed to track two different power supply rails, VCCA and VCCB respectively. Both supply rails are configurable from 0.9 V to 4.5 V allowing universal low-voltage translation from the input An to the output Bn port. Features http://onsemi.com MARKING DIAGRAM VCM G 8 1 UDFN8 MU SUFFIX CASE 517AJ • • • • • • • • • Wide VCCA and VCCB Operating Range: 0.9 V to 4.5 V High-Speed w/ Balanced Propagation Delay Inputs and Outputs have OVT Protection to 4.5 V Non-preferential VCCA and VCCB Sequencing Outputs at 3-State until Active VCC is Reached Power-Off Protection Outputs Switch to 3-State with VCCB at GND Ultra-Small Packaging: 1.8 mm x 1.2 mm UDFN8 This is a Pb-Free Device VC = Specific Device Code M = Date Code G = Pb-Free Package PIN ASSIGNMENT VCCA A1 A2 OE 1 2 3 4 (Top View) 8 7 6 5 VCCB B1 B2 GND Typical Applications • Mobile Phones, PDAs, Other Portable Devices Important Information • ESD Protection for All Pins: HBM (Human Body Model) > 5000 V VCCA A1 VCCB B1 ORDERING INFORMATION Device Package Shipping† A2 B2 NLSV2T240MUTAG UDFN8 3000/Tape & Reel (Pb-Free) OE †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Figure 1. Logic Diagram © Semiconductor Components Industries, LLC, 2007 1 July, 2007 - Rev. 0 Publication Order Number: NLSV2T240/D NLSV2T240 PIN ASSIGNMENT PIN VCCA VCCB GND An Bn OE FUNCTION Input Port DC Power Supply Output Port DC Power Supply Ground Input Port Output Port Output Enable OE L L H TRUTH TABLE Inputs An L H X Outputs Bn H L 3-State MAXIMUM RATINGS Symbol VCCA, VCCB VI VC VO DC Supply Voltage DC Input Voltage Control Input DC Output Voltage (Power Down) (Active Mode) (Tri-State Mode) IIK IOK IO ICCA, ICCB IGND TSTG DC Input Diode Current DC Output Diode Current DC Output Source/Sink Current DC Supply Current Per Supply Pin DC Ground Current per Ground Pin Storage Temperature An OE Bn Bn Bn Rating Value -0.5 to +5.5 -0.5 to +5.5 -0.5 to +5.5 -0.5 to +5.5 -0.5 to +5.5 -0.5 to +5.5 -20 -50 ±50 ±100 ±100 -65 to +150 VI < GND VO < GND VCCA = VCCB = 0 Condition Unit V V V V V V mA mA mA mA mA °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. RECOMMENDED OPERATING CONDITIONS Symbol VCCA, VCCB VI VC VIO Positive DC Supply Voltage Bus Input Voltage Control Input Bus Output Voltage (Power Down Mode) (Active Mode) (Tri-State Mode) TA Dt / DV Operating Temperature Range Input Transition Rise or Rate VI, from 30% to 70% of VCC; VCC = 3.3 V ±0.3 V OE Bn Bn Bn Parameter Min 0.9 GND GND GND GND GND -40 0 Max 4.5 4.5 4.5 4.5 VCCB 4.5 +85 10 Unit V V V V V V °C nS http://onsemi.com 2 NLSV2T240 DC ELECTRICAL CHARACTERISTICS -405C to +855C Symbol VIH Parameter Input HIGH Voltage (An, OE) Test Conditions VCCA (V) 3.6 – 4.5 2.7 – 3.6 2.3 – 2.7 1.4 - 2.3 0.9 – 1.4 VIL Input LOW Voltage (An, OE) 3.6 – 4.5 2.7 – 3.6 2.3 – 2.7 1.4 - 2.3 0.9 – 1.4 VOH Output HIGH Voltage IOH = -100 mA; VI = VIH IOH = -0.5 mA; VI = VIH IOH = -2 mA; VI = VIH IOH = -6 mA; VI = VIH 0.9 – 4.5 0.9 1.4 1.65 2.3 IOH = -12 mA; VI = VIH 2.3 2.7 IOH = -18 mA; VI = VIH 2.3 3.0 IOH = -24 mA; VI = VIH VOL Output LOW Voltage IOL = 100 mA; VI = VIL IOL = 0.5 mA; VI = VIH IOL = 2 mA; VI = VIH IOL = 6 mA; VI = VIL IOL = 12 mA; VI = VIL 3.0 0.9 – 4.5 1.1 1.4 1.65 2.3 2.7 IOL = 18 mA; VI = VIL 2.3 3.0 IOL = 24 mA; VI = VIL II IOFF ICCA ICCB Input Leakage Current Power-Off Leakage Current Quiescent Supply Current Quiescent Supply Current VI = VCCA or GND OE = 0 V VI = VCCA or GND; IO = 0, VCCA = VCCB VI = VCCA or GND; IO = 0, VCCA = VCCB VI = VCCA or GND; IO = 0, VCCA = VCCB VI = VCCA – 0.6 V; VI = VCCA or GND VI = VCCA – 0.6 V; VI = VCCA or GND TA = 25°C, OE = 0 V 3.0 0.9 – 4.5 0 0.9 – 4.5 0.9 – 4.5 0.9 – 4.5 0.9 – 4.5 4.5 3.6 4.5 3.6 0.9 – 4.5 0.9 – 4.5 0.9 1.4 1.65 2.3 2.3 2.7 2.3 3.0 3.0 0.9 – 4.5 1.1 1.4 1.65 2.3 2.7 2.3 3.0 3.0 0.9 – 4.5 0.9 – 4.5 0 0.9 - 4.5 0.9 - 4.5 0.9 – 4.5 4.5 3.6 4.5 3.6 0.9 – 4.5 0.9 – 4.5 VCCB (V) 0.9 – 4.5 Min 2.2 2.0 1.6 0.65 * VCCA 0.9 * VCCA VCCB – 0.2 0.75 * VCCB 1.05 1.25 2.0 1.8 2.2 1.7 2.4 2.2 -1.0 -1.0 -1.0 -1.0 Max 0.8 0.8 0.7 0.35 * VCCA 0.1 * VCCA 0.2 0.3 0.35 0.3 0.4 0.4 0.6 0.4 0.55 1.0 1.0 1.0 1.0 1.0 2.0 10 5.0 10 5.0 1.0 mA mA mA mA mA mA mA mA V V V Unit V ICCA + ICCB Quiescent Supply Current DICCA DICCB IOZ Increase in ICC per Input Voltage, Other Inputs at VCCA or GND Increase in ICC per Input Voltage, Other Inputs at VCCA or GND I/O Tri-State Output Leakage Current http://onsemi.com 3 NLSV2T240 TOTAL STATIC POWER CONSUMPTION (ICCA + ICCB) -405C to +855C VCCB (V) 4.5 VCCA (V) 4.5 3.3 2.8 1.8 0.9 Min Max 2 2