NP3100GBRLG

DO-15 NP Series Preferred Devices Thyristor Surge Protectors High Voltage Bidirectional NP Series Thyristor Surge Protector Devices (TSPD) protect telecommunication circuits such as central office, access, and customer premises equipment from overvoltage conditions. These are bidirectional devices so they are able to have functionality of 2 devices in one package, saving valuable space on board layout. These devices will act as a crowbar when overvoltage occurs and will divert the energy away from circuit or device that is being protected. Use of the NP Series in equipment will help meet various regulatory requirements including: IEC 61000-4-5, IEC 60950, TIA-968-A, EN 60950, UL 1950. http://onsemi.com BIDIRECTIONAL AXIAL LEAD THYRISTOR 110 - 350 VOLTS MT1 MT2 ELECTRICAL PARAMETERS VDRM V(BO) VT IDRM I(BO) IT IH Device V V V mA mA A mA NP1100GxRLG 90 130 4 5 800 1.0 150 NP1300GxRLG 120 160 4 5 800 1.0 150 NP1500GxRLG 140 180 4 5 800 1.0 150 NP1800GxRLG 170 220 4 5 800 1.0 150 NP2300GxRLG 190 260 4 5 800 1.0 150 NP2600GxRLG 220 300 4 5 800 1.0 150 NP3100GxRLG 275 350 4 5 800 1.0 150 NP3500GxRLG 320 400 4 5 800 1.0 150 G = indicates leadfree, RoHS compliant SURGE DATA RATINGS(Nominal Values) Waveform Voltage ms Current ms A B Unit TIA-968-A 10x560 10x560 50 100 A(pk) GR-1089-CORE 10x1000 10x1000 50 80 Specification * x = series ratings Recognized Components AXIAL LEAD CASE 59AA PLASTIC (DO-15) MARKING DIAGRAM A NPxxxx YYWWG G A = Assembly Location NPxxxx = Device Number xxx = (See Table Page 3) YY = Year WW = Work Week G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information on page 4 of this data sheet. Preferred devices are recommended choices for future use and best overall value. © Semiconductor Components Industries, LLC, 2007 October, 2007 - Rev. 1 1 Publication Order Number: NP1100GA/D DO-15 NP Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristics (Note 1) Symbol Breakover Voltage (Both Polarities) Min Typ Unit V NP1100GxRLG NP1300GxRLG NP1500GxRLG NP1800GxRLG NP2300GxRLG NP2600GxRLG NP3100GxRLG NP3500GxRLG 130 160 180 220 260 300 350 400 Off-State Voltage (Both Polarities) VDRM NP1100GxRLG NP1300GxRLG NP1500GxRLG NP1800GxRLG NP2300GxRLG NP2600GxRLG NP3100GxRLG NP3500GxRLG Off State Current Max V(BO) V 90 120 140 170 190 220 275 320 ( VD1 = 50 V ) Both Polarities ( VD2 = VDRM ) Both Polarities IDRM1 IDRM2 2.0 5.0 mA mA Holding Current (Both Polarities) (Note 4) VS = 500 V; IT = 2.2 A IH 150 250 - mA On-State Voltage IT = 1.0 A(pk) (PW = 300 mSec, DC = 2%) VT - - 4.0 V Maximum Non-Repetitive Rate of Change of On-State Current (Note 1) (Haefely test method, 1.0 pk < 100 A) di/dt - - 500 A/mSec Critical Rate of Rise of Off-State Voltage (Linear Waveform, VD = 0.8 VDRM, TJ = 25°C) dv/dt 5.0 - - kV/mSec CAPACITANCE Typ Characteristics Symbol (f=1.0 MHz, 1.0 Vrms, 2 Vdc bias) B 70 60 60 60 40 40 40 40 125 100 100 100 60 60 60 60 Co NP1100GxRLG NP1300GxRLG NP1500GxRLG NP1800GxRLG NP2300GxRLG NP2600GxRLG NP3100GxRLG NP3500GxRLG 1. 2. 3. 4. A Electrical parameters are based on pulsed test methods. di/dt must not be exceeded of a maximum of 100 A/mSec in this application. Measured under pulsed conditions to reduce heating Allow cooling before testing second polarity. http://onsemi.com 2 Unit pF DO-15 NP Series SURGE RATINGS Symbol Characteristics Nominal Pulse Surge Short Circuit Current Non – Repetitive Double Exponential Decay Waveform (Notes 5, 6 and 7) 10 x 560 mSec 10 x 1000 mSec A B Unit A(pk) IPPS1 IPPS2 50 50 100 80 5. Allow cooling before testing second polarity. 6. Measured under pulse conditions to reduce heating. 7. Nominal values may not represent the maximum capability of a device. Ipp - PEAK PULSE CURRENT - %Ipp +I Peak Value 100 IT tr = rise time to peak value tf = decay time to half value I(BO) IH -Voltage Half Value 50 +Voltage VT VDRM V(BO) 0 0 tr tf TIME (ms) -I Figure 2. Voltage Current Characteristics of TSPD Figure 1. Exponential Decay Pulse Waveform Symbol Parameter VDRM Peak Off State Voltage V(BO) Breakover Voltage I(BO) Breakover Current IH Holding Current VT On State Voltage IT On State Current http://onsemi.com 3 DO-15 NP Series ORDERING INFORMATION Part Number Marking NP1100GARLG NP110A NP1100GBRLG NP110B NP1300GARLG NP130A NP1300GBRLG NP130B NP1500GARLG NP150A NP1500GBRLG NP150B NP1800GARLG NP180A NP1800GBRLG NP180B NP2300GARLG NP230A NP2300GBRLG NP230B NP2600GARLG NP260A NP2600GBRLG NP260B NP3100GARLG NP310A NP3100GBRLG NP310B NP3500GARLG NP350A NP3500GBRLG NP350B Case Shipping† Axial Lead (Pb-Free) 5000 / Tape and Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 4 DO-15 NP Series PACKAGE DIMENSIONS AXIAL LEAD CASE 59AA-01 ISSUE O (DO-15) NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY. 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. 6. REPLACES CASE 59-09. B K D DIM A B D K A INCHES MIN MAX 0.228 0.299 0.102 0.142 0.028 0.034 1.000 --- MILLIMETERS MIN MAX 5.80 7.60 2.60 3.60 0.71 0.86 25.44 --- K ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT:  Literature Distribution Center for ON Semiconductor  P .O. Box 5163, Denver, Colorado 80217 USA   Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada   Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada   Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free  USA/Canada Europe, Middle East and Africa Technical Support:  Phone: 421 33 790 2910 Japan Customer Focus Center  Phone: 81-3-5773-3850 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NP1100GA/D