NSR05F30NXT5G
Schottky Barrier Diode
These Schottky barrier diodes are optimized for low forward
voltage drop and low leakage current and are offered in a Chip Scale
Package (CSP) to reduce board space. The low thermal resistance
enables designers to meet the challenging task of achieving higher
efficiency and meeting reduced space requirements.
http://onsemi.com
Features
•
•
•
•
•
•
Low Forward Voltage Drop − 400 mV @ 500 mA
Low Reverse Current − 15 mA @ 10 V VR
500 mA of Continuous Forward Current
ESD Rating − Human Body Model: Class 3B
ESD Rating − Machine Model: Class C
High Switching Speed
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
30 V SCHOTTKY
BARRIER DIODE
1
CATHODE
2
MARKING
DIAGRAM
Typical Applications
•
•
•
•
•
2
ANODE
PIN 1
1
LCD and Keypad Backlighting
Camera Photo Flash
Buck and Boost dc−dc Converters
Reverse Voltage and Current Protection
Clamping & Protection
DSN2
(0402)
CASE 152AC
05F30
YYY
05F30
YYY
= Specific Device Code
= Year Code
Markets
•
•
•
•
•
Mobile Handsets
MP3 Players
Digital Camera and Camcorders
Notebook PCs & PDAs
GPS
ORDERING INFORMATION
Device
NSR05F30NXT5G
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
VR
30
V
Forward Current (DC)
IF
500
mA
Forward Surge Current
IFSM
Reverse Voltage
(60 Hz @ 1 cycle)
Shipping†
DSN2
5000 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
A
10
Repetitive Peak Forward Current
(Pulse Wave = 1 sec, Duty Cycle = 66%)
IFRM
4.0
A
ESD Rating:
ESD
>8
> 400
kV
V
Human Body Model
Machine Model
Package
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
© Semiconductor Components Industries, LLC, 2010
September, 2010 − Rev. 3
1
Publication Order Number:
NSR05F30/D
NSR05F30NXT5G
THERMAL CHARACTERISTICS
Characteristic
Max
Unit
RqJA
PD
240
521
°C/W
mW
Thermal Resistance
Junction−to−Ambient (Note 2)
Total Power Dissipation @ TA = 25°C
RqJA
PD
94
1.3
°C/W
W
Storage Temperature Range
Tstg
−40 to +125
°C
Junction Temperature
TJ
+150
°C
Max
Unit
Thermal Resistance
Junction−to−Ambient (Note 1)
Total Power Dissipation @ TA = 25°C
Symbol
Min
Typ
1. Mounted onto a 4 in square FR−4 board 50 mm sq. 1 oz. Cu 0.06” thick single sided. Operating to steady state.
2. Mounted onto a 4 in square FR−4 board 1 in sq. 1 oz. Cu 0.06” thick single sided. Operating to steady state.
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol
Characteristic
Reverse Leakage
(VR = 10 V)
(VR = 30 V)
IR
Forward Voltage
(IF = 100 mA)
(IF = 500 mA)
VF
http://onsemi.com
2
Min
Typ
15
75
0.320
0.400
0.360
0.430
mA
V
NSR05F30NXT5G
TYPICAL CHARACTERISTICS
100000
0.1
125°C
0.01
0.001
Ir, REVERSE CURRENT (mA)
150°C
0
0.10
75°C
0.20
25°C
−25°C
0.30
0.40
1000
125°C
100
75°C
10
25°C
1
0.1
−25°C
0.01
0.001
0.50
150°C
10000
0
5
10
15
20
VF, FORWARD VOLTAGE (V)
VR, REVERSE VOLTAGE (V)
Figure 1. Forward Voltage
Figure 2. Leakage Current
160
CT, TOTAL CAPACITANCE (pF)
IF, FORWARD CURRENT (A)
1
TA = 25°C
140
120
100
80
60
40
20
0
0
5
10
15
20
VR, REVERSE VOLTAGE (V)
Figure 3. Total Capacitance
http://onsemi.com
3
25
30
25
30
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
DSN2, 1.0x0.6, 0.575P, (0402)
CASE 152AC
ISSUE D
DATE 27 APR 2017
SCALE 8:1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
0.05 C
A B
D
DIM
A
A1
b
D
E
L
L2
L3
E
0.05 C
TOP VIEW
0.05 C
A
0.05 C
A1
C
SIDE VIEW
GENERIC
MARKING DIAGRAM1*
SEATING
PLANE
L2
CATHODE BAND MONTH
CODING
RECOMMENDED
SOLDER FOOTPRINT*
DEC
1.20
SEP
0.47
JUN
MAR
FEB
JAN
PIN 1
0.60
DIMENSIONS: MILLIMETERS
See Application Note AND8464/D for more mounting details
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DOCUMENT NUMBER:
DESCRIPTION:
98AON40464E
XX = Specific Device Code
M = Date Code
*This information is generic. Please refer
to device data sheet for actual part
marking. Pb−Free indicator, “G”, may
or not be present. Some products may
not follow the Generic Marking.
BOTTOM VIEW
0.60
XXM
XXXX = Specific Device Code
YYY = Year Code
b
0.05 C A B
L3
PIN 1
XXXX
YYY
L
1
GENERIC
MARKING DIAGRAM2*
PIN 1
0.05 C A B
L/2
MILLIMETERS
MIN
MAX
0.25
0.31
−−−
0.05
0.45
0.55
1.00 BSC
0.60 BSC
0.85
0.95
0.35
0.45
0.20
0.30
NOV OCT
XXXX
YYY
XXXX
Y09
DEVICE CODE
YEAR CODE
(EXAMPLE)
INDICATES AUG 2009
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
DSN2, 1.0X0.6, 0.575P, (0402)
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative