NSVBCP56-10T3G

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. BCP56 Series NPN Silicon Epitaxial Transistor These NPN Silicon Epitaxial transistors are designed for use in audio amplifier applications. The device is housed in the SOT−223 package, which is designed for medium power surface mount applications. Features • High Current: 1.0 A • The SOT−223 package can be soldered using wave or reflow. The • • • • formed leads absorb thermal stress during soldering, eliminating the possibility of damage to the die Available in 12 mm Tape and Reel Use BCP56T1G to Order the 7 inch/1000 Unit Reel Use BCP56T3G to Order the 13 inch/4000 Unit Reel PNP Complement is BCP53T1G S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant www.onsemi.com MEDIUM POWER NPN SILICON HIGH CURRENT TRANSISTOR SURFACE MOUNT COLLECTOR 2,4 BASE 1 EMITTER 3 4 12 MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Symbol Value Unit Collector−Emitter Voltage VCEO 80 Vdc Collector−Base Voltage VCBO 100 Vdc Emitter−Base Voltage VEBO 5 Vdc IC 1 Adc Collector Current − Peak (Note 1) ICM 2 Adc Total Power Dissipation @ TA = 25°C (Note 2) Derate above 25°C PD 1.5 12 W mW/°C Operating and Storage Temperature Range TJ, Tstg −65 to 150 °C Symbol Max Unit RqJA 83.3 °C/W Rating Collector Current THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction−to−Ambient (surface mounted) Maximum Temperature for Soldering Purposes Time in Solder Bath 3 SOT−223 CASE 318E STYLE 1 MARKING DIAGRAM AYW XXXXXG G 1 XXXXX = Specific Device Code A = Assembly Location Y = Year W = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION TL °C Sec 260 10 See detailed ordering, marking and shipping information in the package dimensions section on page 5 of this data sheet. Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Reference SOA curve. 2. Device mounted on a FR−4 glass epoxy printed circuit board 1.575 in x 1.575 in x 0.0625 in; mounting pad for the collector lead = 0.93 sq in. © Semiconductor Components Industries, LLC, 2016 March, 2018 − Rev. 14 1 Publication Order Number: BCP56T1/D BCP56 Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Min Typ Max Unit Collector−Base Breakdown Voltage (IC = 100 mAdc, IE = 0) V(BR)CBO 100 − − Vdc Collector−Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) V(BR)CEO 80 − − Vdc Emitter−Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO 5.0 − − Vdc Collector−Base Cutoff Current (VCB = 30 Vdc, IE = 0) ICBO − − 100 nAdc Emitter−Base Cutoff Current (VEB = 5.0 Vdc, IC = 0) IEBO − − 10 mAdc 25 40 63 100 25 − − − − − − 250 160 250 − Characteristics OFF CHARACTERISTICS ON CHARACTERISTICS (Note 3) hFE DC Current Gain (IC = 5.0 mA, VCE = 2.0 V) (IC = 150 mA, VCE = 2.0 V) All Part Types BCP56 BCP56−10 BCP56−16 All Types (IC = 500 mA, VCE = 2.0 V) − Collector−Emitter Saturation Voltage (IC = 500 mAdc, IB = 50 mAdc) VCE(sat) − − 0.5 Vdc Base−Emitter On Voltage (IC = 500 mAdc, VCE = 2.0 Vdc) VBE(on) − − 1.0 Vdc Rise Time (VCC = 30 Vdc, IC = 150 mA, IB1 = 15 mA) tr − 14 − ns Delay Time (VCC = 30 Vdc, IC = 150 mA, IB1 = 15 mA) td − 9 − ns Storage Time (VCC = 30 Vdc, IC = 150 mA, IB1 = 15 mA, IB2 = 15 mA) ts − 714 − ns Fall Time (VCC = 30 Vdc, IC = 150 mA, IB1 = 15 mA, IB2 = 15 mA) tf − 58 − ns fT − 130 − MHz SWITCHING CHARACTERISTICS DYNAMIC CHARACTERISTICS Current−Gain − Bandwidth Product (IC = 10 mAdc, VCE = 5.0 Vdc, f = 35 MHz) Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2.0% www.onsemi.com 2 BCP56 Series TYPICAL ELECTRICAL CHARACTERISTICS 1000 hFE, DC CURRENT GAIN VCE = 2 V TA = 150°C 125°C 25°C 100 - 55°C - 65°C 10 0.1 10 IC, COLLECTOR CURRENT (mA) 1 100 1000 1000 80 60 TJ = 25°C C, CAPACITANCE (pF) f, T CURRENT‐GAIN — BANDWIDTH PRODUCT (MHz) Figure 1. DC Current Gain 100 40 Cibo 20 10 8.0 6.0 10 1.0 10 100 IC, COLLECTOR CURRENT (mA) Cobo 4.0 0.1 1000 0.2 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Current−Gain − Bandwidth Product 100 Figure 3. Capacitance 1.2 1 IC/IB = 10 1.1 150°C VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) 50 25°C −55°C 0.1 IC/IB = 10 1.0 0.9 −55°C 0.8 0.7 25°C 0.6 0.5 150°C 0.4 0.3 0.2 0.01 0.001 0.01 0.1 0.001 1 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 4. Collector Emitter Saturation Voltage vs. Collector Current Figure 5. Base Emitter Saturation Voltage vs. Collector Current www.onsemi.com 3 1 BCP56 Series 1.2 1.1 VCE = 2 V 1.0 0.9 −55°C 0.8 25°C 0.7 0.6 0.5 150°C 0.4 0.3 0.2 0.001 0.01 0.1 1 VCE , COLLECTOR‐EMITTER VOLTAGE (VOLTS) VBE(on), BASE−EMITTER VOLTAGE (V) TYPICAL ELECTRICAL CHARACTERISTICS 1.0 TJ = 25°C 0.8 IC = 10mA 0.6 100mA 250mA 500mA 0.4 0.2 0 0.05 0.1 IC, COLLECTOR CURRENT (A) Figure 6. Base Emitter Voltage vs. Collector Current 0.2 1.0 2.0 0.5 5.0 IB, BASE CURRENT (mA) 10 20 50 Figure 7. Collector Saturation Region 1.6 1 1S 1 mS 1.4 PD, POWER DISSIPATION (W) IC, COLLECTOR CURRENT (A) 50 mA 100 mS 10 mS 0.1 1.2 1.0 0.8 0.6 0.4 0.2 0.01 0.1 1 10 100 0.0 0 VCE, COLLECTOR EMITTER VOLTAGE (V) 100 40 60 80 120 TA, AMBIENT TEMPERATURE (°C) Figure 8. Safe Operating Area Figure 9. Power Derating Curve www.onsemi.com 4 20 140 160 BCP56 Series ORDERING INFORMATION Device BCP56T1G Marking Package Shipping† BH SOT−223 (Pb−Free) 1000 / Tape & Reel BH SOT−223 (Pb−Free) 4000 / Tape & Reel BH−10 SOT−223 (Pb−Free) 1000 / Tape & Reel BH−10 SOT−223 (Pb−Free) 4000 / Tape & Reel BH−16 SOT−223 (Pb−Free) 1000 / Tape & Reel BH−16 SOT−223 (Pb−Free) 4000 / Tape & Reel SBCP56T1G* BCP56T3G SBCP56T3G* BCP56−10T1G SBCP56−10T1G* BCP56−10T3G NSVBCP56−10T3G* BCP56−16T1G SBCP56−16T1G* BCP56−16T3G SBCP56−16T3G* †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable. www.onsemi.com 5 BCP56 Series PACKAGE DIMENSIONS SOT−223 (TO−261) CASE 318E−04 ISSUE N D b1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCH. 4 HE DIM A A1 b b1 c D E e e1 L L1 HE E 1 2 3 b e1 e 0.08 (0003) A1 C q A q L STYLE 1: PIN 1. 2. 3. 4. L1 MIN 1.50 0.02 0.60 2.90 0.24 6.30 3.30 2.20 0.85 0.20 1.50 6.70 0° MILLIMETERS NOM MAX 1.63 1.75 0.06 0.10 0.75 0.89 3.06 3.20 0.29 0.35 6.50 6.70 3.50 3.70 2.30 2.40 0.94 1.05 −−− −−− 1.75 2.00 7.00 7.30 − 10° MIN 0.060 0.001 0.024 0.115 0.009 0.249 0.130 0.087 0.033 0.008 0.060 0.264 0° INCHES NOM 0.064 0.002 0.030 0.121 0.012 0.256 0.138 0.091 0.037 −−− 0.069 0.276 − MAX 0.068 0.004 0.035 0.126 0.014 0.263 0.145 0.094 0.041 −−− 0.078 0.287 10° BASE COLLECTOR EMITTER COLLECTOR SOLDERING FOOTPRINT* 3.8 0.15 2.0 0.079 2.3 0.091 2.3 0.091 6.3 0.248 2.0 0.079 mm Ǔ 1.5 ǒinches SCALE 6:1 0.059 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ◊ N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 www.onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BCP56T1/D