NSVJ3557SA3T1G

NSVJ3557SA3 N-Channel JFET 15V, 10 to 32mA, 35mS Automotive JFET designed for compact and efficient designs and including high gain performance. AEC-Q101 qualified JFET and PPAP capable suitable for automotive applications. Features  Large | yfs |  Small Ciss  This small package enables sets to be smaller and thinner  Ultralow noise figure  Pb-Free and RoHS compliance  AEC-Q101 qualified and PPAP capable www.onsemi.com ELECTRICAL CONNECTION N-Channel 3 1 : Source 2 : Drain 3 : Gate 3 1 SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS at Ta = 25°C (Note 1) Parameter 2 1 Typical Applications  AM Tuner RF Amplifier Low Noise Amplifier Symbol 2 SC-59 / CP3 Value Unit Drain-to-Source Voltage VDSX 15 V Gate-to-Drain Voltage VGDS 15 V Gate Current IG 10 mA Drain Current ID 50 mA PD Allowable Power Dissipation 200 mW Operating Junction and TJ, TStg 55 to150 C Storage Temperature Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. ORDERING INFORMATION See detailed ordering and shipping information on page 5 of this data sheet © Semiconductor Components Industries, LLC, 2015 July 2015 - Rev. 0 1 Publication Order Number : NSVJ3557A3/D NSVJ3557SA3 ELECTRICAL CHARACTERISTICS at Ta = 25°C (Note 2) Parameter Symbol Conditions Value min Gate-to-Drain Breakdown Voltage V(BR)GDS IG = 10A, VDS = 0V Gate Cutoff Current IGSS VGS = 10V, VDS = 0V Cutoff Voltage VGS(off) VDS = 5V, ID = 100A Drain Current IDSS VDS = 5V, VGS = 0V 10 Forward Transfer Admittance | yfs | VDS = 5V, VGS = 0V, f = 1kHz 24 Input Capacitance Ciss Reverse Transfer Capacitance Crss VDS = 5V, VGS = 0V, f = 1MHz typ max 15 V 1 0.3 Unit 0.7 1.5 32 35 nA V mA mS 10 pF 2.9 pF VDS = 5V, Rg=1kΩ, ID =1mA, f=1kHz Noise Figure NF 1 dB Note 2 : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 NSVJ3557SA3 www.onsemi.com 3 NSVJ3557SA3 PACKAGE DIMENSIONS unit : mm SC-59 / CP3 CASE 318BJ ISSUE O D A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER SIDE. 4. DIMENSIONS D AND E1 ARE MEASURED AT THE OUTERMOST EXTREME OF THE PLASTIC BODY. 5. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.10 AND 0.20 FROM THE TIP. L 3X 3 E E1 1 2 e 3X DIM A A1 A2 b c D E E1 e L b 0.10 TOP VIEW M C A A 3X c A2 A1 C SIDE VIEW SEATING PLANE END VIEW GENERIC MARKING DIAGRAM XXX M RECOMMENDED SOLDERING FOOTPRINT* 3X 0.80 1 = Specific Device Code = Date Code = Pb-Free Package (Note: Microdot may be in either location) 3X 1.00 XXX M *This information is generic. Please refer to device data sheet for actual part marking. 3.40 0.95 PITCH MILLIMETERS MIN MAX 0.95 1.35 0.00 0.10 0.20 0.40 0.35 0.50 0.10 0.20 2.75 3.05 2.30 2.70 1.35 1.65 0.95 BSC 0.35 0.75 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 4 NSVJ3557SA3 ORDERING INFORMATION Device NSVJ3557SA3T1G Marking Package Shipping IR SC-59 3-Lead / CP3 Pb-Free) 3,000 / Tape & Reel † For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. www.onsemi.com 5