NSVJ3910SB3T1G

NSVJ3910SB3 N-Channel JFET 25V, 20 to 40mA, 40mS Automotive JFET designed for compact and efficient designs and including high gain performance. AEC-Q101 qualified JFET and PPAP capable suitable for automotive applications. www.onsemi.com ELECTRICAL CONNECTION Features  High Forward Transfer Admittance  High Breakdown Voltage  Low Input Capacitance  Low Noise Figure  Pb-Free and RoHS compliance  AEC-Q101 qualified and PPAP capable N-Channel 3 1 : Source 2 : Drain 3 : Gate 2 1 Typical Applications Low Noise Amplifier for Automotive AM Radio 3 SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS at Ta = 25°C (Note 1) Parameter 1 Drain-to-Source Voltage Symbol VDSX Value Gate-to-Drain Voltage VGDS 25 V Gate Current IG 10 mA Drain Current ID 50 mA 2 CPH3 Unit 25 V MARKING PD Allowable Power Dissipation 400 mW Operating Junction and TJ, Tstg 55 to 150 C Storage Temperature Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. ORDERING INFORMATION See detailed ordering and shipping information on page 5 of this data sheet © Semiconductor Components Industries, LLC, 2016 April 2016 - Rev. 0 1 Publication Order Number : NSVJ3910SB3/D NSVJ3910SB3 ELECTRICAL CHARACTERISTICS at Ta = 25°C (Note 2) Parameter Symbol Conditions Value min typ 25 IGSS IG = 10A, VDS = 0V VGS = 10V, VDS = 0V VGS(off) VDS = 5V, ID = 100A 0.6 IDSS VDS = 5V, VGS = 0V 20 Forward Transfer Admittance | yfs | VDS = 5V, VGS = 0V, f = 1kHz 30 Input Capacitance Ciss Reverse Transfer Capacitance Crss Gate-to-Drain Breakdown Voltage V(BR)GDS Gate Cutoff Current Cutoff Voltage Drain Current VDS = 5V, VGS = 0V, f = 1MHz max Unit V 1.0 1.2 1.8 40 40 nA V mA mS 6.0 pF 2.3 pF VDS = 5V, VGS = 0V f = 100MHz Noise Figure NF 2.1 2.8 dB Note 2 : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 NSVJ3910SB3 www.onsemi.com 3 NSVJ3910SB3 PACKAGE DIMENSIONS unit : mm CPH3 CASE 318BA ISSUE O *1 : Lot Indication RECOMMENDED SOLDERING FOOTPRINT 2.4 1.4 0.6 1 : Source 2 : Drain 3 : Gate 0.95 www.onsemi.com 4 0.95 NSVJ3910SB3 ORDERING INFORMATION Device NSVJ3910SB3T1G Marking Package Shipping J2 CPH3 Pb-Free) 3,000 / Tape & Reel † For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. www.onsemi.com 5