NSVP264SDSF3T1G

DATA SHEET www.onsemi.com PIN Diode Dual series PIN Diode for VHF, UHF and AGC 50 V, 50 mA rs = 2.5 W typ PIN Diode ELECTRICAL CONECTION NSVP264SDSF3 3 This PIN diode is designed to realize compact and efficient designs. Two PIN diodes are incorporated in one SC−70 package. The use of dual PIN diodes can reduce both system cost and board space. This PIN diode is AEC−Q101 qualified and PPAP capable for automotive applications. MARKING DIAGRAM SC−70 / MCP3 CASE 419AJ Features • • • • • • 2 1 1 : Anode 2 : Cathode 3 : Cathode / Anode Series connection of 2 elements in a small−size package Small Interterminal Capacitance (C = 0.23 pF typ) Small Forward Series Resistance (rs = 2.5 W typ) MCP3 package is pin−compatible with SC−70 AEC−Q101 qualified and PPAP capable Pb−Free, Halogen Free and RoHS Compliance 3 LOT No. KV 1 Typical Applications LOT No. 2 ORDERING INFORMATION • Auto Gain Control for Radio See detailed ordering and shipping information on page 3 of this data sheet. ABSOLUTE MAXIMUM RATINGS at TA = 25°C Symbol Parameter Value Unit VR Reverse Voltage 50 V IF Forward Current 50 mA P Allowable Power Dissipation 100 mW −55 to +125 °C TJ, Tstg Operating Junction and Storage Temperature Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. ELECTRICAL CHARACTERISTICS at TA = 25°C (Note 1) Min Typ Max Unit VR Reverse Voltage Parameter IR = 10 mA 50 − − V Symbol Conditions IR Reverse Current VR = 50 V − − 0.1 mA VF Forward Voltage IF = 50 mA − 0.91 0.95 V C Interterminal Capacitance VR = 50 V, f = 1 MHz − 0.23 0.4 pF rs Series Resistance IF = 5 mA, f = 100 MHz − 4.0 8.0 W IF = 10 mA, f = 100 MHz − 2.5 4.5 W Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. The specifications shown above are for each individual diode. © Semiconductor Components Industries, LLC, 2022 June, 2022 − Rev. 0 1 Publication Order Number: NSVP264SDSF3/D NSVP264SDSF3 0.1 5 Interterminal Capacitance, C −pF Forward Current, IF − mA 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 TA = 125°C 25°C 3 2 TA = 25°C f = 1 MHz 7 5 3 2 −55°C 0.01 0 0.2 0.4 0.6 0.8 1.0 0.1 0.1 1.2 2 3 5 7 1.0 2 Figure 1. IF −VF 5 3 3 2 2 2 7 7 5 5 Series Resistance, rs − W 1k 3 2 50°C 7 5 3 2 100 mA 100 7 5 3 3 2 2 0.1 10 1 mA 7 25°C 5 5 mA 3 3 10 mA 2 2 0.01 0 5 7 100 IF = 10 mA 10 5 3 TA = 25°C TA = 75°C Reverse Current, IR − nA 7 10 Figure 2. C −VR 5 7 5 Reverse Voltage, VR − V Forward Voltage, VF − V 1.0 3 1.0 10 20 30 40 50 60 1.0 Reverse Voltage, VR − V 2 3 5 7 10 2 3 5 7 100 2 3 Frequency, f − MHz Figure 3. IR −VR Figure 4. rs − f www.onsemi.com 2 5 7 1000 2 NSVP264SDSF3 Series Resistance, rs − W 2 TA = 25°C f = 100 MHz 1k 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Forward Current, IF − mA Figure 5. rs − IF ORDERING INFORMATION Device NSVP264SDSF3T1G Marking Package Shipping † KV SC−70 / MCP3 (Pb−Free / Halogen Free) 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SC−70 / MCP3 CASE 419AJ ISSUE O DOCUMENT NUMBER: 98AON65442E DESCRIPTION: SC−70 / MCP3 DATE 30 NOV 2011 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com  ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales