NSVRB521S30T5G

RB521S30 Schottky Barrier Diode, 30 V These Schottky barrier diodes are designed for high−speed switching applications, circuit protection, and voltage clamping. Extremely low forward voltage reduces conduction loss. Miniature surface mount package is excellent for hand−held and portable applications where space is limited. www.onsemi.com Features • • • • • Extremely Fast Switching Speed Extremely Low Forward Voltage 0.5 V (max) @ IF = 200 mA Low Reverse Current NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant* 30 V SCHOTTKY BARRIER DIODE SOD−523 CASE 502 1 CATHODE MAXIMUM RATINGS Rating Symbol Value Unit Reverse Voltage VR 30 Vdc Forward Current DC IF 200 mA IFSM 1.0 A Peak Forward Surge Current (Note 1) MARKING DIAGRAM 1 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. 60 Hz for 1 cycle. THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR−5 Board, (Note 2) TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Junction and Storage Temperature Range Symbol Max Unit 200 1.57 mW mW/°C 2 ANODE 5M M G 5M MG G 2 = Device Code = Date Code* = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. PD RqJA TJ, Tstg °C/W 635 ORDERING INFORMATION Device RB521S30T1G −55 to +125 °C Package Shipping† SOD−523 3000/Tape & Reel (Pb−Free) NSVRB521S30T1G SOD−523 3000/Tape & Reel (Pb−Free) 2. FR−5 Minimum Pad. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. RB521S30T5G SOD−523 8000/Tape & Reel (Pb−Free) NSVRB521S30T5G SOD−523 8000/Tape & Reel (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2015 September, 2018 − Rev. 11 1 Publication Order Number: RB521S30T1/D RB521S30 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Reverse Leakage (VR = 10 V) IR − − 30.0 mA Forward Voltage (IF = 200 mA) VF − − 0.50 Vdc IF, FORWARD CURRENT (A) 1 TA = 125°C 100m TA = 75°C 10m 1m 100m TA = 25°C 10m 1m TA = −25°C 0 0.1 0.2 0.3 0.4 0.5 0.6 VF, FORWARD VOLTAGE (V) Figure 1. Forward Characteristics IR, REVERSE CURRENT (A) 10m 1m TA = 125°C 100m TA = 75°C 10m TA = 25°C 1m 100n TA = −25°C 10n 1n 0 5 10 15 20 25 30 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Reverse Characteristics CT, TOATAL CAPACITANCE (pF) 20 18 16 14 12 10 8 6 4 2 0 0 5 10 15 20 VR, REVERSE VOLTAGE (VOLTS) Figure 3. Total Capacitance www.onsemi.com 2 25 30 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS 2 2 1 1 STYLE 1 STYLE 2 SOD−523 CASE 502 ISSUE E SCALE 4:1 −X− D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. −Y− E 2X b 0.08 1 M DATE 28 SEP 2010 2 X Y DIM A b c D E HE L L2 TOP VIEW A c HE RECOMMENDED SOLDERING FOOTPRINT* SIDE VIEW 2X 2X 2X MILLIMETERS MIN NOM MAX 0.50 0.60 0.70 0.25 0.30 0.35 0.07 0.14 0.20 1.10 1.20 1.30 0.70 0.80 0.90 1.50 1.60 1.70 0.30 REF 0.15 0.20 0.25 L 0.48 PACKAGE OUTLINE L2 1.80 2X 0.40 DIMENSION: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the onsemi Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. BOTTOM VIEW XX M XX 1 2 1 STYLE 1 XX M M GENERIC MARKING DIAGRAM* 2 STYLE 2 = Specific Device Code Date Code *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE DOCUMENT NUMBER: DESCRIPTION: STYLE 2: NO POLARITY 98AON11524D SOD−523 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com  ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales