NSZ5V6V2
Zener Voltage Regulators
200 mW SOD−523 Surface Mount
This series of Zener diodes is packaged in a SOD−523 surface
mount package. They are designed to provide voltage regulation
protection and are especially attractive in situations where space is at a
premium. They are well suited for applications such as cellular
phones, hand held portables, and high density PC boards.
www.onsemi.com
Specification Features
• Standard Zener Breakdown Voltage of 5.6 V
• Steady State Power Rating of 200 mW
• Small Body Outline Dimensions:
•
•
•
•
1
Cathode
0.047″ x 0.032″ (1.20 mm x 0.80 mm)
Low Body Height: 0.028″ (0.7 mm)
ESD Rating of Class 3 (>16 kV) per Human Body Model
Tight Tolerance VZ
These are Pb−Free Devices
2
1
SOD−523
CASE 502
PLASTIC
Mechanical Characteristics
CASE: Void-free, transfer-molded, thermosetting plastic
MARKING DIAGRAM
Epoxy Meets UL 94, V−0
LEAD FINISH: 100% Matte Sn (Tin)
MOUNTING POSITION: Any
1
QUALIFIED MAX REFLOW TEMPERATURE: 260°C
Device Meets MSL 1 Requirements
Total Device Dissipation FR−5 Board,
(Note 1) @ TA = 25°C
Derate above 25°C
Thermal Resistance from
Junction−to−Ambient
Junction and Storage Temperature Range
CT MG
G
2
CT = Specific Device Code
M
Date Code*
G
= Pb−Free Package
MAXIMUM RATINGS
Rating
2
Anode
(Note: Microdot may be in either location)
Symbol
Max
Unit
200
1.5
mW
mW/°C
RqJA
635
°C/W
TJ, Tstg
−65 to
+150
°C
PD
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. FR−4 Minimum Pad.
*Date Code orientation may vary depending
upon manufacturing location.
ORDERING INFORMATION
Device
Package
Shipping†
NSZ5V6V2T1G
SOD−523
(Pb−Free)
3000/Tape & Reel
NSZ5V6V2T5G
SOD−523
(Pb−Free)
8000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2007
August, 2018 − Rev. 1
1
Publication Order Number:
NSZ5V6V2/D
NSZ5V6V2
ELECTRICAL CHARACTERISTICS
(TA = 25°C unless otherwise noted,
VF = 0.9 V Max. @ IF = 10 mA for all types)
Symbol
I
IF
Parameter
VZ
Reverse Zener Voltage @ IZT
IZT
Reverse Current
ZZT
Maximum Zener Impedance @ IZT
IZK
Reverse Current
ZZK
Maximum Zener Impedance @ IZK
IR
Reverse Leakage Current @ VR
VR
Reverse Voltage
IF
Forward Current
VF
Forward Voltage @ IF
QVZ
Maximum Temperature Coefficient of VZ
C
Max. Capacitance @VR = 0 and f = 1 MHz
VZ VR
V
IR VF
IZT
Figure 1. Zener Voltage Regulator
ELECTRICAL CHARACTERISTICS (VF = 0.9 Max @ IF = 10 mA for all types)
NSZ5V6V2T1G
Test
Current
Izt mA
5.0
Min
Max
ZZK IZ
= 1.0
mA W
Max
5.49
5.73
200
25
50
ZZT
IZ = IZT
@ 10%
Mod W
Max
mA
V
Min
Max
C pF Max @ VR
=0
f = 1 MHz
40
1.0
2.0
−2.0
2.5
200
Max
IR @ VR
dVZ/dt (mV/k)
@ IZT1 = 5 mA
100
80
POWER DISSIPATION (%)
Device*
Zener Voltage
VZ
60
40
20
0
0
75
100
125
TEMPERATURE (°C)
Figure 2. Steady State Power Derating
www.onsemi.com
2
150
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
2
2
1
1
STYLE 1
STYLE 2
SOD−523
CASE 502−01
ISSUE E
SCALE 4:1
−X−
D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH.
MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF
BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS.
−Y−
E
M
2
X Y
DIM
A
b
c
D
E
HE
L
L2
TOP VIEW
A
c
HE
MILLIMETERS
MIN
NOM
MAX
0.50
0.60
0.70
0.25
0.30
0.35
0.07
0.14
0.20
1.10
1.20
1.30
0.70
0.80
0.90
1.50
1.60
1.70
0.30 REF
0.15
0.20
0.25
GENERIC
MARKING DIAGRAM*
SIDE VIEW
2X
XX
L
1
XX
2
1
STYLE 1
2X
XX
M
L2
RECOMMENDED
SOLDERING FOOTPRINT*
PACKAGE
OUTLINE
= Specific Device Code
Date Code
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
1.80
0.48
2
STYLE 2
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
BOTTOM VIEW
2X
M
b
0.08
1
M
2X
DATE 28 SEP 2010
2X
STYLE 2:
NO POLARITY
0.40
DIMENSION: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DOCUMENT NUMBER:
DESCRIPTION:
98AON11524D
SOD−523
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative