NTH4L075N065SC1

DATA SHEET www.onsemi.com Silicon Carbide (SiC) MOSFET – EliteSiC, 57mohm, 650 V, M2, TO-247-4L V(BR)DSS RDS(ON) MAX ID MAX 650 V 85 m @ 18 V 38 A D NTH4L075N065SC1 G Features • Typ. RDS(on) = 57 m @ VGS = 18 V • • • • • Typ. RDS(on) = 75 m @ VGS = 15 V Ultra Low Gate Charge (QG(tot) = 61 nC) Low Output Capacitance (Coss = 107 pF) 100% Avalanche Tested TJ = 175°C This Device is Halide Free and RoHS Compliant with exemption 7a, Pb−Free 2LI (on second level interconnection) Typical Applications • • • • Gate−to−Source Voltage MARKING DIAGRAM Symbol Value Unit VDSS 650 V VGS −8/+22 V Recommended Operation Values of Gate−to−Source Voltage TC < 175°C VGSop −5/+18 V Steady State TC = 25°C ID 38 A PD 148 W ID 26 A PD 74 W IDM 120 A TJ, Tstg −55 to +175 °C Continuous Drain Current (Note 1) Power Dissipation (Note 1) Continuous Drain Current (Note 1) Steady State TC = 100°C Power Dissipation (Note 1) Pulsed Drain Current (Note 2) TC = 25°C Operating Junction and Storage Temperature Range Source Current (Body Diode) N−CHANNEL MOSFET TO−247−4LD CASE 340CJ MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Parameter S1 S2 D S2 S1 G SMPS (Switching Mode Power Supplies) Solar Inverters UPS (Uninterruptable Power Supplies) Energy Storages Drain−to−Source Voltage S1: Kelvin Source S2: Power Source IS 29 A Single Pulse Drain−to−Source Avalanche Energy (IL(pk) = 12.9 A, L = 1 mH) (Note 3) EAS 83 mJ Maximum Lead Temperature for Soldering (1/8″ from case for 5 s) TL 260 °C H4L075 065SC1 AYWWZZ H4L075065SC1 = Specific Device Code A = Assembly Location Y = Year WW = Work Week ZZ = Lot Traceability ORDERING INFORMATION Device Package Shipping NTH4L075N065SC1 TO−247−4LD 30 Units / Tube Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The entire application environment impacts the thermal resistance values shown, they are not constants and are only valid for the particular conditions noted. 2. Repetitive rating, limited by max junction temperature. 3. EAS of 83 mJ is based on starting TJ = 25°C; L = 1 mH, IAS = 12.9 A, VDD = 50 V, VGS = 18 V. © Semiconductor Components Industries, LLC, 2021 January, 2023 − Rev. 2 1 Publication Order Number: NTH4L075N065SC1/D NTH4L075N065SC1 Table 1. THERMAL RESISTANCE MAXIMUM RATINGS Symbol Max Unit Junction−to−Case − Steady State (Note 1) Parameter RJC 1.01 °C/W Junction−to−Ambient − Steady State (Note 1) RJA 40 Table 2. ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Symbol Test Condition Min Typ Max Unit 650 − − V ID = 20 mA, referenced to 25°C − 0.15 − V/°C VGS = 0 V, VDS = 650 V TJ = 25°C − − 10 A TJ = 175°C − − 1 mA − − 250 nA 1.8 2.8 4.3 V −5 − +18 V VGS = 15 V, ID = 15 A, TJ = 25°C − 75 − m VGS = 18 V, ID = 15 A, TJ = 25°C − 57 85 VGS = 18 V, ID = 15 A, TJ = 175°C − 68 − VDS = 10 V, ID = 15 A − 9 − S VGS = 0 V, f = 1 MHz, VDS = 325 V − 1196 − pF OFF CHARACTERISTICS Drain−to−Source Breakdown Voltage V(BR)DSS Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJ Zero Gate Voltage Drain Current Gate−to−Source Leakage Current IDSS IGSS VGS = 0 V, ID = 1 mA VGS = +18/−5 V, VDS = 0 V ON CHARACTERISTICS (Note 2) Gate Threshold Voltage Recommended Gate Voltage Drain−to−Source On Resistance Forward Transconductance VGS(TH) VGS = VDS, ID = 5 mA VGOP RDS(on) gFS CHARGES, CAPACITANCES & GATE RESISTANCE Input Capacitance CISS Output Capacitance COSS − 107 − Reverse Transfer Capacitance CRSS − 9 − − 61 − − 19 − − 18 − f = 1 MHz − 5.8 −  VGS = −5/18 V, VDS = 400 V, ID = 15 A, RG = 2.2  Inductive load − 10 − ns − 12 − td(OFF) − 20 − tf − 7 − Turn−On Switching Loss EON − 38 − Turn−Off Switching Loss EOFF − 16 − Etot − 54 − − − 29 − − 120 − 4.4 − Total Gate Charge QG(TOT) Gate−to−Source Charge QGS Gate−to−Drain Charge QGD Gate−Resistance RG VGS = −5/18 V, VDS = 520 V, ID = 15 A nC SWITCHING CHARACTERISTICS Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time Total Switching Loss td(ON) tr J DRAIN−SOURCE DIODE CHARACTERISTICS Continuous Drain−Source Diode Forward Current ISD Pulsed Drain−Source Diode Forward Current (Note 2) ISDM Forward Diode Voltage VSD VGS = −5 V, TJ = 25°C VGS = −5 V, ISD = 15 A, TJ = 25°C www.onsemi.com 2 A V NTH4L075N065SC1 Table 2. ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) (continued) Parameter Symbol Test Condition Min Typ Max Unit − 16 − ns − 72 − nC DRAIN−SOURCE DIODE CHARACTERISTICS VGS = −5/18 V, ISD = 15 A, dIS/dt = 1000 A/s Reverse Recovery Time tRR Reverse Recovery Charge QRR Reverse Recovery Energy EREC − 7.4 − J Peak Reverse Recovery Current IRRM − 9 − A Charge Time Ta − 9 − ns Discharge Time Tb − 7 − ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 3 NTH4L075N065SC1 TYPICAL CHARACTERISTICS VGS = 18 V 5 15 V RDS(on), NORMALIZED DRAIN−TO− SOURCE ON−RESISTANCE ID, DRAIN CURRENT (A) 60 12 V 50 40 30 10 V 20 9V 10 0 8V 7V 1 2 3 4 5 6 7 8 9 VGS = 12 V 3 2 15 V 18 V 1 0 0 10 0 10 20 30 40 50 VDS, DRAIN−TO−SOURCE VOLTAGE (V) ID, DRAIN CURRENT (A) Figure 1. On−Region Characteristics Figure 2. Normalized On−Resistance vs. Drain Current and Gate Voltage 300 1.7 1.5 RDS(on), ON−RESISTANCE (m) RDS(on), NORMALIZED DRAIN−TO− SOURCE RESISTANCE ID = 15 A VGS = 18 V 1.6 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 −75 −50 −25 80 0 25 50 75 200 TJ = 25°C TJ = 150°C 100 8 10 12 14 16 TJ, JUNCTION TEMPERATURE (°C) VGS, GATE−TO−SOURCE VOLTAGE (V) Figure 3. On−Resistance Variation with Temperature Figure 4. On−Resistance vs. Gate−to−Source Voltage 100 IS, REVERSE DRAIN CURRENT (A) 60 TJ = 25°C 50 40 TJ = 175°C 30 20 TJ = −55°C 10 0 4 ID = 15 A 0 100 125 150 175 200 VDS = 10 V 70 ID, DRAIN CURRENT (A) 4 6 8 10 12 14 16 VGS = −5 V TJ = 175°C TJ = 25°C 10 TJ = −55°C 1 2 18 3 4 5 6 7 VGS, GATE−TO−SOURCE VOLTAGE (V) VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics Figure 6. Diode Forward Voltage vs. Current www.onsemi.com 4 18 8 NTH4L075N065SC1 18 15 10000 VDD = 390 V ID = 15 A VDD = 520 V 12 CAPACITANCE (pF) VGS, GATE−TO−SOURCE VOLTAGE (V) TYPICAL CHARACTERISTICS (CONTINUED) VDD = 650 V 9 6 3 0 Coss 100 Crss 10 f = 1 MHz VGS = 0 V −3 −6 0 15 30 60 45 1 75 Qg, GATE CHARGE (nC) 0.1 1 10 100 VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 7. Gate−to−Source Voltage vs. Total Charge Figure 8. Capacitance vs. Drain−to−Source Voltage 100 40 10 30 20 10 RJC = 1.01°C/W 0 1 0.001 0.01 0.1 tAV, TIME IN AVALANCHE (ms) 25 1 10 s 10 100 s 10 ms 1 RDS(on) Limit Thermal Limit Package Limit 0.1 0.1 75 100 125 150 175 1 ms 100 ms/DC 1 10 100 VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 10. Maximum Continuous Drain Current vs. Case Temperature P(PK), PEAK TRANSIENT POWER (W) ID, DRAIN CURRENT (A) 100 Single Pulse RJC = 1.01°C/W TC = 25°C 50 TC, CASE TEMPERATURE (°C) Figure 9. Unclamped Inductive Switching Capability 300 650 VGS = 18 V TJ = 25°C ID, DRAIN CURRENT (A) IAS, AVALANCHE CURRENT (A) Ciss 1000 1000 20000 Single Pulse RJC = 1.01°C/W TC = 25°C 10000 1000 100 0.00001 0.0001 0.001 0.01 0.1 t, PULSE WIDTH (sec) Figure 11. Safe Operating Area Figure 12. Single Pulse Maximum Power Dissipation www.onsemi.com 5 1 NTH4L075N065SC1 TYPICAL CHARACTERISTICS (CONTINUED) ZJC(t). EFFECTIVE TRANSIENT THERMAL RESISTANCE (°C/W) 1 0.5 Duty Cycle 0.2 0.1 0.1 0.05 0.02 0.01 0.01 t1 t2 Single Pulse 0.00001 Notes: RJC = 1.01°C/W Peak TJ = PDM x ZJC(t) + TC Duty Cycle, D = t1/t2 P DM 0.0001 0.001 0.01 t, RECTANGULAR PULSE DURATION (sec) Figure 13. Junction−to−Case Thermal Response www.onsemi.com 6 0.1 1 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−247−4LD CASE 340CJ ISSUE A DOCUMENT NUMBER: DESCRIPTION: 98AON13852G TO−247−4LD DATE 16 SEP 2019 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com  ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales