NTMFS4C05NT3G

NTMFS4C05N MOSFET – Power, Single, N-Channel, SO-8 FL 30 V, 78 A Features • • • • Low RDS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant www.onsemi.com V(BR)DSS RDS(ON) MAX ID MAX 3.4 mW @ 10 V 30 V 78 A 5.0 mW @ 4.5 V Applications • CPU Power Delivery • DC−DC Converters D (5−8) MAXIMUM RATINGS (TJ = 25°C unless otherwise stated) Parameter Drain−to−Source Voltage Gate−to−Source Voltage Symbol Value Unit VDSS 30 V VGS ±20 V ID 21.7 A Continuous Drain Current RqJA (Note 1) TA = 25°C Power Dissipation RqJA (Note 1) TA = 25°C PD 2.57 W Continuous Drain Current RqJA ≤ 10 s (Note 1) TA = 25°C ID 34.8 A Power Dissipation RqJA ≤ 10 s (Note 1) Continuous Drain Current RqJA (Note 2) TA = 80°C TA = 25°C PD 6.6 W TA = 25°C ID 11.9 A TA = 80°C 8.9 TA = 25°C PD 0.77 W Continuous Drain Current RqJC (Note 1) TC = 25°C ID 78 A Power Dissipation RqJC (Note 1) TC = 25°C PD 33 W TA = 25°C, tp = 10 ms IDM 174 A TC =80°C Current Limited by Package TA = 25°C 58 80 A TJ, TSTG −55 to +150 °C IS 30 A Drain to Source dV/dt dV/dt 7.0 V/ns Single Pulse Drain−to−Source Avalanche Energy (TJ = 25°C, VGS = 20 V, IL = 41 Apk, L = 0.1 mH, RGS = 25 W) (Note 3) EAS 84 mJ TL 260 °C Source Current (Body Diode) Lead Temperature for Soldering Purposes (1/8″ from case for 10 s) MARKING DIAGRAMS D S SO−8 FLAT LEAD S CASE 488AA S STYLE 1 G 1 D 4C05N AYWZZ D D A Y W ZZ = Assembly Location = Year = Work Week = Lot Traceabililty ORDERING INFORMATION IDmax Operating Junction and Storage Temperature N−CHANNEL MOSFET 26.0 Power Dissipation RqJA (Note 2) Pulsed Drain Current S (1,2,3) 16.3 TA = 80°C Steady State G (4) Device Package Shipping† NTMFS4C05NT1G SO−8 FL (Pb−Free) 1500 / Tape & Reel NTMFS4C05NT3G SO−8 FL (Pb−Free) 5000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Surface−mounted on FR4 board using 1 sq−in pad, 1 oz Cu. © Semiconductor Components Industries, LLC, 2015 May, 2019 − Rev. 7 1 Publication Order Number: NTMFS4C05N/D NTMFS4C05N 2. Surface−mounted on FR4 board using the minimum recommended pad size. 3. This is the absolute maximum ratings. Parts are 100% tested at TJ = 25°C, VGS = 20 V, IL = 29 A, EAS = 42 mJ. THERMAL RESISTANCE MAXIMUM RATINGS Parameter Symbol Value Junction−to−Case (Drain) RqJC 3.8 Junction−to−Ambient – Steady State (Note 4) RqJA 48.6 Junction−to−Ambient – Steady State (Note 5) RqJA 161.7 Junction−to−Ambient – (t ≤ 10 s) (Note 4) RqJA 19 Unit °C/W 4. Surface−mounted on FR4 board using 1 sq−in pad, 1 oz Cu. 5. Surface−mounted on FR4 board using the minimum recommended pad size. ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Symbol Test Condition Min Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 30 Drain−to−Source Breakdown Voltage (transient) V(BR)DSSt VGS = 0 V, ID(aval) = 12.6 A, Tcase = 25°C, ttransient = 100 ns 34 Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Parameter Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current Gate−to−Source Leakage Current IDSS V V 12 VGS = 0 V, VDS = 24 V mV/°C TJ = 25°C 1.0 TJ = 125°C 10 IGSS VDS = 0 V, VGS = ±20 V VGS(TH) VGS = VDS, ID = 250 mA mA ±100 nA 2.2 V ON CHARACTERISTICS (Note 6) Gate Threshold Voltage Negative Threshold Temperature Coefficient Drain−to−Source On Resistance 1.3 VGS(TH)/TJ RDS(on) 5.1 mV/°C VGS = 10 V ID = 30 A 2.7 3.4 VGS = 4.5 V ID = 30 A 4.0 5.0 Forward Transconductance gFS VDS = 1.5 V, ID = 15 A Gate Resistance RG TA = 25°C 68 0.3 1.0 mW S 2.0 W CHARGES AND CAPACITANCES Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance 1972 VGS = 0 V, f = 1 MHz, VDS = 15 V 1215 VGS = 0 V, VDS = 15 V, f = 1 MHz 0.030 CRSS 59 Capacitance Ratio CRSS/CISS Total Gate Charge QG(TOT) 14 Threshold Gate Charge QG(TH) 3.3 Gate−to−Source Charge QGS Gate−to−Drain Charge QGD Gate Plateau Voltage Total Gate Charge pF VGS = 4.5 V, VDS = 15 V; ID = 30 A 6.0 nC 5.0 VGP QG(TOT) VGS = 10 V, VDS = 15 V; ID = 30 A 3.1 V 30 nC SWITCHING CHARACTERISTICS (Note 7) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time td(ON) tr td(OFF) 11 VGS = 4.5 V, VDS = 15 V, ID = 15 A, RG = 3.0 W tf 32 21 7.0 www.onsemi.com 2 ns NTMFS4C05N ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Symbol Test Condition Min Typ Max Unit SWITCHING CHARACTERISTICS (Note 7) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time td(ON) tr td(OFF) 8.0 VGS = 10 V, VDS = 15 V, ID = 15 A, RG = 3.0 W tf 26 ns 26 5.0 DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD TJ = 25°C 0.77 TJ = 125°C 0.62 tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 10 A 1.1 V 40.2 VGS = 0 V, dIS/dt = 100 A/ms, IS = 30 A QRR 20.3 ns 19.9 30.2 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 6. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 7. Switching characteristics are independent of operating junction temperatures. www.onsemi.com 3 NTMFS4C05N 0.028 0.026 0.024 0.022 0.020 0.018 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 3.0 TJ = 25°C 3.8 V 3.6 V 4 V to 6.5 V ID, DRAIN CURRENT (A) 140 130 10 V 120 110 100 90 80 70 60 50 40 30 20 10 0 0 3.4 V 3.2 V 3.0 V 2.8 V 2.6 V 1 2 3 5 4 140 130 VDS = 5 V 120 110 100 90 80 70 60 50 40 30 20 10 0 0 0.5 1.0 2.0 2.5 3.0 3.5 4.0 Figure 2. Transfer Characteristics ID = 30 A TJ = 25°C 4.0 5.0 6.0 7.0 8.0 9.0 0.008 4.5 TJ = 25°C 0.007 0.006 0.005 VGS = 4.5 V 0.004 VGS = 10 V 0.003 0.002 10 10 20 30 40 50 60 70 ID, DRAIN CURRENT (A) Figure 4. On−Resistance vs. Drain Current and Gate Voltage 10000 1.7 VGS = 0 V ID = 30 A VGS = 10 V TJ = 150°C IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) TJ = −55°C 1.5 Figure 1. On−Region Characteristics Figure 3. On−Resistance vs. VGS 1.5 TJ = 25°C VGS, GATE−TO−SOURCE VOLTAGE (V) VGS, GATE−TO−SOURCE VOLTAGE (V) 1.6 TJ = 125°C VDS, DRAIN−TO−SOURCE VOLTAGE (V) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) ID, DRAIN CURRENT (A) TYPICAL CHARACTERISTICS 1.4 1.3 1.2 1.1 1.0 1000 TJ = 125°C 100 TJ = 85°C 0.9 0.8 0.7 −50 −25 0 25 50 75 100 125 150 10 5 10 15 20 25 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current vs. Voltage www.onsemi.com 4 30 NTMFS4C05N TYPICAL CHARACTERISTICS VGS = 0 V TJ = 25°C 2750 2500 C, CAPACITANCE (pF) VGS, GATE−TO−SOURCE VOLTAGE (V) 3000 2250 Ciss 2000 1750 1500 1250 1000 Coss 750 500 250 0 Crss 0 5 10 15 20 25 30 QT 8 6 4 Qgd Qgs TJ = 25°C VDD = 15 V VGS = 10 V ID = 30 A 2 0 0 4 8 12 16 Figure 8. Gate−to−Source and Drain−to−Source Voltage vs. Total Charge IS, SOURCE CURRENT (A) 18 td(off) td(on) 100 tr tf 10 1 10 16 14 12 10 8 6 4 TJ = 125°C TJ = 25°C 0.6 0.7 0.8 0.9 1.0 VSD, SOURCE−TO−DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 100 10 ms 100 ms 1 ms 10 10 ms 0 V < VGS < 10 V Single Pulse TC = 25°C RDS(on) Limit Thermal Limit Package Limit 0.1 dc 1 10 EAS, SINGLE PULSE DRAIN−TO− SOURCE AVALANCHE ENERGY (mJ) ID, DRAIN CURRENT (A) 0.5 RG, GATE RESISTANCE (W) 1000 0.01 0.01 0 0.4 100 32 VGS = 0 V 2 0.1 28 Figure 7. Capacitance Variation 20 1 24 Qg, TOTAL GATE CHARGE (nC) VDD = 15 V ID = 15 A VGS = 10 V 1 20 VDS, DRAIN−TO−SOURCE VOLTAGE (V) 1000 t, TIME (ns) 10 100 45 ID = 29 A 40 35 30 25 20 15 10 5 0 25 50 75 100 125 VDS, DRAIN−TO−SOURCE VOLTAGE (V) TJ, STARTING JUNCTION TEMPERATURE (°C) Figure 11. Maximum Rated Forward Biased Safe Operating Area Figure 12. Maximum Avalanche Energy vs. Starting Junction Temperature www.onsemi.com 5 150 NTMFS4C05N TYPICAL CHARACTERISTICS 100 Duty Cycle = 50% R(t) (°C/W) 10 1 20% 10% 5% 2% 1% 0.1 0.01 Single Pulse 0.000001 0.00001 0.0001 0.001 0.1 0.01 1 10 100 1000 PULSE TIME (sec) Figure 13. Thermal Response 100 120 ID, DRAIN CURRENT (A) 100 GFS (S) 80 60 40 20 0 0 10 20 30 40 50 60 70 TA = 25°C 1 1.E−07 80 TA = 85°C 10 1.E−06 1.E−05 1.E−04 ID (A) PULSE WIDTH (SECONDS) Figure 14. GFS vs. ID Figure 15. Avalanche Characteristics www.onsemi.com 6 1.E−03 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO−8FL) CASE 488AA ISSUE N 1 DATE 25 JUN 2018 SCALE 2:1 2X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. 0.20 C D A 2 B D1 2X 0.20 C 4X E1 2 q E c 1 2 3 A1 4 TOP VIEW C DETAIL A 0.10 C SEATING PLANE A 0.10 C SIDE VIEW MILLIMETERS MIN NOM MAX 0.90 1.00 1.10 0.00 −−− 0.05 0.33 0.41 0.51 0.23 0.28 0.33 5.00 5.15 5.30 4.70 4.90 5.10 3.80 4.00 4.20 6.00 6.30 6.15 5.70 5.90 6.10 3.45 3.65 3.85 1.27 BSC 0.51 0.575 0.71 1.20 1.35 1.50 0.51 0.575 0.71 0.125 REF 3.00 3.40 3.80 0_ −−− 12 _ DIM A A1 b c D D1 D2 E E1 E2 e G K L L1 M q GENERIC MARKING DIAGRAM* DETAIL A 1 0.10 b C A B 0.05 c 8X XXXXXX AYWZZ e/2 e L 1 4 K RECOMMENDED SOLDERING FOOTPRINT* E2 PIN 5 (EXPOSED PAD) L1 M 2X 0.495 4.560 2X 1.530 G D2 2X BOTTOM VIEW XXXXXX = Specific Device Code A = Assembly Location Y = Year W = Work Week ZZ = Lot Traceability *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. Some products may not follow the Generic Marking. 0.475 3.200 4.530 STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN 1.330 STYLE 2: 2X PIN 1. ANODE 0.905 2. ANODE 3. ANODE 4. NO CONNECT 0.965 5. CATHODE 1 4X 1.000 4X 0.750 1.270 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: DESCRIPTION: 98AON14036D DFN5 5x6, 1.27P (SO−8FL) Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative