NTTFS4C13N
MOSFET – Power, Single,
N-Channel, m8FL
30 V, 38 A
Features
•
•
•
•
Low RDS(on) to Minimize Conduction Losses
Low Capacitance to Minimize Driver Losses
Optimized Gate Charge to Minimize Switching Losses
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
http://onsemi.com
V(BR)DSS
RDS(ON) MAX
ID MAX
9.4 mW @ 10 V
30 V
38 A
14 mW @ 4.5 V
• CPU Power Delivery
• DC−DC Converters
D (5−8)
MAXIMUM RATINGS (TJ = 25°C unless otherwise stated)
Parameter
Symbol
Value
Unit
Drain−to−Source Voltage
VDSS
30
V
Gate−to−Source Voltage
VGS
±20
V
ID
11.7
A
Continuous Drain
Current RqJA
(Note 1)
TA = 25°C
Power Dissipation
RqJA (Note 1)
TA = 25°C
PD
2.06
W
Continuous Drain
Current RqJA ≤ 10 s
(Note 1)
TA = 25°C
ID
15.8
A
Power Dissipation
RqJA ≤ 10 s (Note 1)
Continuous Drain
Current RqJA
(Note 2)
TA = 80°C
N−CHANNEL MOSFET
TA = 25°C
PD
3.73
W
TA = 25°C
ID
7.2
A
TA = 80°C
5.2
TA = 25°C
PD
0.78
W
Continuous Drain
Current RqJC
(Note 1)
TC = 25°C
ID
38
A
Power Dissipation
RqJC (Note 1)
TC = 25°C
PD
21.5
W
TA = 25°C, tp = 10 ms
IDM
68
A
IDmax
70
A
TJ,
TSTG
−55 to
+150
°C
TC =80°C
Current Limited by Package
TA = 25°C
Operating Junction and Storage
Temperature
Source Current (Body Diode)
MARKING DIAGRAM
1
S
S
S
G
1
11.4
Power Dissipation
RqJA (Note 2)
Pulsed Drain
Current
S (1,2,3)
8.5
TA = 80°C
Steady
State
G (4)
27
WDFN8
(m8FL)
CASE 511AB
4C13
A
Y
WW
G
4C13
AYWWG
G
D
D
D
D
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
IS
19
A
Drain to Source DV/DT
dV/dt
7.0
V/ns
Single Pulse Drain−to−Source Avalanche
Energy (TJ = 25°C, VGS = 10 V, IL = 4 Apk,
L = 0.1 mH, RGS = 25 W) (Note 3)
EAS
22
mJ
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
TL
260
°C
ORDERING INFORMATION
Device
Package
Shipping†
NTTFS4C13NTAG
WDFN8
(Pb−Free)
1500 /
Tape & Reel
NTTFS4C13NTWG
WDFN8
(Pb−Free)
5000 /
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Surface−mounted on FR4 board using 1 sq−in pad, 1 oz Cu.
2. Surface−mounted on FR4 board using the minimum recommended pad size.
© Semiconductor Components Industries, LLC, 2014
June, 2019 − Rev. 1
1
Publication Order Number:
NTTFS4C13N/D
NTTFS4C13N
3. This is absolute maximum rating. Parts are tested at TJ = 25°C Vqs = 10 V,
IL = 15 Apk, EAS = 11 mJ.
THERMAL RESISTANCE MAXIMUM RATINGS
Parameter
Symbol
Value
Junction−to−Case (Drain)
RqJC
5.8
Junction−to−Ambient – Steady State (Note 4)
RqJA
60.8
Junction−to−Ambient – Steady State (Note 5)
RqJA
160
Junction−to−Ambient – (t ≤ 10 s) (Note 4)
RqJA
33.5
Unit
°C/W
4. Surface−mounted on FR4 board using 1 sq−in pad, 1 oz Cu.
5. Surface−mounted on FR4 board using the minimum recommended pad size.
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 mA
30
Drain−to−Source Breakdown Voltage
(transient)
V(BR)DSSt
VGS = 0 V, ID(aval) = TBD A,
Tcase = 25°C, ttransient = 100 ns
34
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
Typ
Max
Unit
OFF CHARACTERISTICS
Zero Gate Voltage Drain Current
Gate−to−Source Leakage Current
IDSS
V
V
14.9
VGS = 0 V,
VDS = 24 V
mV/°C
TJ = 25°C
1.0
TJ = 125°C
10
IGSS
VDS = 0 V, VGS = ±20 V
VGS(TH)
VGS = VDS, ID = 250 mA
mA
±100
nA
2.1
V
ON CHARACTERISTICS (Note 6)
Gate Threshold Voltage
Negative Threshold Temperature Coefficient
Drain−to−Source On Resistance
VGS(TH)/TJ
RDS(on)
1.3
4.8
mV/°C
VGS = 10 V
ID = 30 A
7.5
9.4
VGS = 4.5 V
ID = 12 A
11.2
14
mW
Forward Transconductance
gFS
VDS = 1.5 V, ID = 15 A
40
S
Gate Resistance
RG
TA = 25°C
1.0
W
CHARGES AND CAPACITANCES
Input Capacitance
CISS
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
770
VGS = 0 V, f = 1 MHz, VDS = 15 V
443
pF
127
Capacitance Ratio
CRSS/CISS
Total Gate Charge
QG(TOT)
7.8
Threshold Gate Charge
QG(TH)
1.4
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
QGD
3.7
Gate Plateau Voltage
VGP
3.6
V
15.2
nC
Total Gate Charge
VGS = 0 V, VDS = 15 V, f = 1 MHz
VGS = 4.5 V, VDS = 15 V; ID = 30 A
QG(TOT)
VGS = 10 V, VDS = 15 V; ID = 30 A
0.165
2.9
nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
6. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
7. Switching characteristics are independent of operating junction temperatures.
http://onsemi.com
2
NTTFS4C13N
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
SWITCHING CHARACTERISTICS (Note 7)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
td(ON)
9
tr
td(OFF)
VGS = 4.5 V, VDS = 15 V,
ID = 15 A, RG = 3.0 W
35
tf
5
td(ON)
6.0
tr
td(OFF)
VGS = 10 V, VDS = 15 V,
ID = 15 A, RG = 3.0 W
tf
ns
13
26
ns
16
3.0
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
Reverse Recovery Time
VSD
TJ = 25°C
0.82
TJ = 125°C
0.69
tRR
Charge Time
ta
Discharge Time
tb
Reverse Recovery Charge
VGS = 0 V,
IS = 30 A
1.1
V
23.4
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 30 A
QRR
12.1
ns
11.3
9.7
nC
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
6. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
7. Switching characteristics are independent of operating junction temperatures.
http://onsemi.com
3
NTTFS4C13N
TYPICAL CHARACTERISTICS
70
6.5 V
4.5 V
ID, DRAIN CURRENT (A)
60
3.8 V
40
3.6 V
30
3.4 V
20
3.2 V
3.0 V
10
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
4V
50
0
1
2
3
40
30
20
10
TJ = 25°C
4
5
0
1
1.5
2
2.5
3
3.5
4
4.5
Figure 2. Transfer Characteristics
0.012
0.011
0.010
0.009
0.008
0.007
4.0
5.0
6.0
7.0
8.0
9.0
VGS, GATE−TO−SOURCE VOLTAGE (V)
10
5
0.022
TJ = 25°C
0.020
0.018
0.016
VGS = 4.5 V
0.014
0.012
0.010
0.008
0.006
VGS = 10 V
10
20
30
40
50
60
70
ID, DRAIN CURRENT (A)
Figure 3. On−Resistance vs. VGS
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
10000
1.7
ID = 30 A
VGS = 10 V
VGS = 0 V
TJ = 150°C
IDSS, LEAKAGE (nA)
RDS(on), DRAIN−TO−SOURCE
RESISTANCE (NORMALIZED)
0.5
Figure 1. On−Region Characteristics
0.013
1.5
0
TJ = −55°C
VGS, GATE−TO−SOURCE VOLTAGE (V)
0.014
1.6
TJ = 125°C
TJ = 25°C
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
ID = 30 A
3.0
50
2.8 V
0.015
0.006
VDS = 5 V
60
4.2 V
ID, DRAIN CURRENT (A)
10 V
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
70
1.4
1.3
1.2
1.1
1
0.9
1000
TJ = 125°C
100
TJ = 85°C
0.8
0.7
−50
−25
0
25
50
75
100
125
150
10
5
10
15
20
25
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
http://onsemi.com
4
30
NTTFS4C13N
1000
VGS = 0 V
TJ = 25°C
C, CAPACITANCE (pF)
900
Ciss
800
VGS, GATE−TO−SOURCE VOLTAGE (V)
TYPICAL CHARACTERISTICS
700
600
Coss
500
400
300
200
Crss
100
0
0
5
10
15
20
25
30
7
6
5
Qgd
4
3
TJ = 25°C
VDD = 15 V
VGS = 10 V
ID = 30 A
Qgs
2
1
0
0
2
4
6
8
10
12
14
Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
16
30
VGS = 0 V
IS, SOURCE CURRENT (A)
t, TIME (ns)
8
Figure 7. Capacitance Variation
100
tr
td(off)
10
td(on)
tf
1
10
100
25
20
TJ = 25°C
15
TJ = 125°C
10
5
0
0.4
0.5
0.6
0.7
0.8
0.9
1.0
RG, GATE RESISTANCE (W)
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
100
12
10 ms
10
100 ms
1 ms
10 ms
1
0 V < VGS < 10 V
Single Pulse
TC = 25°C
RDS(on) Limit
Thermal Limit
Package Limit
0.01
0.01
0.1
dc
1
10
EAS, SINGLE PULSE DRAIN−TO−
SOURCE AVALANCHE ENERGY (mJ)
ID, DRAIN CURRENT (A)
QT
9
Qg, TOTAL GATE CHARGE (nC)
VDD = 15 V
ID = 15 A
VGS = 10 V
0.1
10
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
1000
1
11
100
ID = 15 A
10
8
6
4
2
0
25
50
75
100
125
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
TJ, STARTING JUNCTION TEMPERATURE (°C)
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
Figure 12. Maximum Avalanche Energy vs.
Starting Junction Temperature
http://onsemi.com
5
150
NTTFS4C13N
TYPICAL CHARACTERISTICS
100
Duty Cycle = 50%
R(t) (°C/W)
10
1
20%
10%
5%
2%
1%
0.1
Single Pulse
0.01
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
1000
PULSE TIME (sec)
Figure 13. Thermal Response
100
50
45
ID, DRAIN CURRENT (A)
40
GFS (S)
35
30
25
20
15
10
TA = 25°C
TA = 85°C
10
5
0
0
5
1
1.0E−08
10 15 20 25 30 35 40 45 50 55 60 65 70
1.0E−07
1.0E−06
1.0E−05
1.0E−04 1.E−03
ID (A)
PULSE WIDTH (SECONDS)
Figure 14. GFS vs. ID
Figure 15. Avalanche Characteristics
http://onsemi.com
6
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
WDFN8 3.3x3.3, 0.65P
CASE 511AB
ISSUE D
1
SCALE 2:1
DATE 23 APR 2012
2X
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH
PROTRUSIONS OR GATE BURRS.
0.20 C
D
A
D1
B
2X
0.20 C
8 7 6 5
4X
E1 E
q
c
1 2 3 4
A1
TOP VIEW
0.10 C
A
e
SIDE VIEW
0.10
8X b
C A B
0.05
C
4X
DETAIL A
8X
e/2
1
0.42
4
INCHES
NOM
0.030
−−−
0.012
0.008
0.130 BSC
0.116
0.120
0.078
0.083
0.130 BSC
0.116
0.120
0.058
0.063
0.009
0.012
0.026 BSC
0.012
0.016
0.026
0.032
0.012
0.017
0.002
0.005
0.055
0.059
0_
−−−
MIN
0.028
0.000
0.009
0.006
MAX
0.031
0.002
0.016
0.010
0.124
0.088
0.124
0.068
0.016
0.020
0.037
0.022
0.008
0.063
12 _
0.65
PITCH
PACKAGE
OUTLINE
4X
0.66
M
E3
8
5
D2
BOTTOM VIEW
1
3.60
L1
GENERIC
MARKING DIAGRAM*
XXXXX
A
Y
WW
G
MILLIMETERS
MIN
NOM
MAX
0.70
0.75
0.80
0.00
−−−
0.05
0.23
0.30
0.40
0.15
0.20
0.25
3.30 BSC
2.95
3.05
3.15
1.98
2.11
2.24
3.30 BSC
2.95
3.05
3.15
1.47
1.60
1.73
0.23
0.30
0.40
0.65 BSC
0.30
0.41
0.51
0.65
0.80
0.95
0.30
0.43
0.56
0.06
0.13
0.20
1.40
1.50
1.60
0_
−−−
12 _
SOLDERING FOOTPRINT*
L
G
SEATING
PLANE
DETAIL A
K
E2
C
6X
0.10 C
DIM
A
A1
b
c
D
D1
D2
E
E1
E2
E3
e
G
K
L
L1
M
q
XXXXX
AYWWG
G
0.75
2.30
0.57
0.47
2.37
3.46
DIMENSION: MILLIMETERS
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
*This information is generic. Please refer
to device data sheet for actual part
marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
DOCUMENT NUMBER:
DESCRIPTION:
98AON30561E
WDFN8 3.3X3.3, 0.65P
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative