ON Semiconductor
Is Now
To learn more about onsemi™, please visit our website at
www.onsemi.com
onsemi and and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or
subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi
product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without
notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,
or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws,
regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/
or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application
by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.
NUF2240W1
2 Line EMI Filter with ESD
Protection
This device is a 2 line EMI filter array for wireless applications.
Greater than −20 dB attenuation is obtained at 800 MHz. It also offers
ESD protection−clamping transients from static discharges.
ESD protection is provided across all capacitors.
http://onsemi.com
Features
• EMI Filtering and ESD Protection
• Integration of 11 Discrete Components
• Compliance with IEC61000−4−2 (Level 4)
Pin 6
Output(1)
Pin 5
VCC
Pin 4
Output(2)
Pin 1
Input(1)
Pin 2
GND
Pin 3
Input(2)
> 8.0 kV (Contact)
• SC−88/SOT−363 Package
• Moisture Sensitivity Level 1
• ESD Ratings:
Machine Model = C
•
Human Body Model = 3B
This is a Pb−Free Device
MARKING
DIAGRAM
Benefits
• Reduces EMI/RFI Emissions on a Data Line
• Integrated Solution Offers Cost and Space Savings in a
6
SC−88/SOT−363 Package
• Reduces Parasitic Inductances Which Offer a More “Ideal” Low Pass
1
SC−88
CASE 419B
Filter Response
1
• Integrated Solution Improves System Reliability
24 = Specific Device Code
M = Month Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
Applications
•
•
•
•
•
24 M G
G
EMI Filtering and ESD Protection for Data Lines
Wireless Phones
PDAs and Handheld Products
Notebook Computers
LCD Displays
ORDERING INFORMATION
Device
Package
Shipping†
NUF2240W1T1G
SC−88
(Pb−Free)
3000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2005
June, 2005 − Rev. 1
1
Publication Order Number:
NUF2240W1/D
NUF2240W1
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Symbol
Parameter
ESD Discharge IEC61000−4−2
Value
VPP
Unit
kV
Air Discharge
Contact Discharge
15
8.0
Steady−State Power per Resistor
PR
mW
Steady−State Power per Package
PT
mW
Operating Temperature Range
TOP
−40 to 85
°C
Storage Temperature Range
TSTG
−55 to 150
°C
TL
260
°C
Maximum Lead Temperature for Soldering Purposes (1.8 in from case for 10 seconds)
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Parameter
Maximum Reverse Working Voltage
Breakdown Voltage
Symbol
Test Conditions
Min
Typ
VRWM
Unit
5.0
V
1.0
A
115
VBR
IR = 1.0 mA
Leakage Current
IR
VRWM = 3.0 V
Resistance
RA
IR = 20 mA
Capacitance (Notes 1 and 2)
Cd
VR = 2.5 V, f = 1.0 MHz
17
pF
Cut−Off Frequency (Note 3)
f3dB
Above this frequency,
appreciable attenuation occurs
125
MHz
1. Measured at 25°C, VR = 2.5 V, f = 1.0 MHz.
2. Total line capacitance is 2 times the Diode Capacitance (Cd).
3. 50 source and 50 load termination.
http://onsemi.com
2
6.0
Max
85
7.0
100
V
NUF2240W1
2
NORMALIZED CAPACITANCE
0
−5
−15
−20
−25
−30
1.E+06
1
0.5
0
1.E+07
1.E+08
1.E+09
1.E+10
0
1
2
3
4
FREQUENCY (Hz)
REVERSE VOLTAGE (V)
Figure 1. Insertion Loss Characteristic
(50 W Source and 50 W Lead Termination)
Figure 2. Typical Capacitance vs.
Reverse Biased Voltage
(Normalized Capacitance, Cd @ 2.5 V)
110
108
106
RESISTANCE ()
S21 (dB)
−10
1.5
104
102
100
98
96
94
92
90
−40
−20
0
20
40
60
TEMPERATURE (°C)
Figure 3. Typical Resistance over Temperature
http://onsemi.com
3
80
5
NUF2240W1
PACKAGE DIMENSIONS
SC−88/SC70−6/SOT−363
CASE 419B−02
ISSUE V
D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 419B−01 OBSOLETE, NEW STANDARD 419B−02.
e
6
5
4
HE
DIM
A
A1
A3
b
C
D
E
e
L
HE
−E−
1
2
3
b 6 PL
0.2 (0.008)
M
E
M
A3
MILLIMETERS
MIN
NOM MAX
0.80
0.95
1.10
0.00
0.05
0.10
0.20 REF
0.10
0.21
0.30
0.10
0.14
0.25
1.80
2.00
2.20
1.15
1.25
1.35
0.65 BSC
0.10
0.20
0.30
2.00
2.10
2.20
INCHES
NOM MAX
0.037 0.043
0.002 0.004
0.008 REF
0.004 0.008 0.012
0.004 0.005 0.010
0.070 0.078 0.086
0.045 0.049 0.053
0.026 BSC
0.004 0.008 0.012
0.078 0.082 0.086
MIN
0.031
0.000
C
A
A1
L
SOLDERING FOOTPRINT*
0.50
0.0197
0.65
0.025
0.65
0.025
0.40
0.0157
1.9
0.0748
SCALE 20:1
mm Ǔ
ǒinches
SC−88/SC70−6/SOT−363
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
4
For additional information, please contact your
local Sales Representative.
NUF2240W1/D
