NZ9F7V5ST5G

NZ9F2V4ST5G, SZNZ9F2V4ST5G SERIES Zener Voltage Regulators 250 mW SOD−923 Surface Mount This series of Zener diodes is packaged in a SOD−923 surface mount package. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand held portables, and high density PC boards. http://onsemi.com 1 Cathode Specification Features • Standard Zener Breakdown Voltage Range −2.4 V to 18 V • Steady State Power Rating of 250 mW • Small Body Outline Dimensions: • • • • • 0.039″ x 0.024″ (1.00 mm x 0.60 mm) Low Body Height: 0.016″ (0.40 mm) ESD Rating of Class 3 (>16 kV) per Human Body Model Tight Tolerance VZ SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These are Pb−Free Devices Mechanical Characteristics CASE: Void-free, transfer-molded, thermosetting plastic Epoxy Meets UL 94, V−0 LEAD FINISH: 100% Matte Sn (Tin) MOUNTING POSITION: Any Device Meets MSL 1 Requirements MAXIMUM RATINGS Rating Thermal Resistance from Junction−to−Ambient Junction and Storage Temperature Range MARKING DIAGRAM 2 1 SOD−923 CASE 514AB 1 X MG G 2 X = Specific Device Code M = Month Code G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION QUALIFIED MAX REFLOW TEMPERATURE: 260°C Total Device Dissipation FR−5 Board, (Note 1) @ TA = 25°C Derate above 25°C 2 Anode Symbol Max Unit 250 2.0 mW mW/°C RqJA 500 °C/W TJ, Tstg −65 to +150 °C Device Package Shipping† NZ9FxxxST5G, SZNZ9FxxxST5G SOD−923 (Pb−Free) 8000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. PD DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet. Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR−4 Minimum Pad. © Semiconductor Components Industries, LLC, 2014 July, 2014 − Rev. 3 1 Publication Order Number: NZ9F2V4S/D NZ9F2V4ST5G, SZNZ9F2V4ST5G SERIES ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA for all types) Symbol I IF Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current ZZT Maximum Zener Impedance @ IZT IZK Reverse Current ZZK Maximum Zener Impedance @ IZK IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF QVZ Maximum Temperature Coefficient of VZ C Max. Capacitance @VR = 0 and f = 1 MHz VZ VR IR VF IZT Figure 1. Zener Voltage Regulator 100 POWER DISSIPATION (%) 80 60 40 20 0 0 25 50 75 100 125 TEMPERATURE (°C) Figure 2. Steady State Power Derating http://onsemi.com 2 150 V NZ9F2V4ST5G, SZNZ9F2V4ST5G SERIES ELECTRICAL CHARACTERISTICS (VF = 0.9 Max @ IF = 10 mA for all types) Zener Voltage VZ ZZT IZ = IZT @ 10% Mod W Max ZZK IZ = 1.0 mA W Max Max IR @ VR dVZ/dt (mV/k) @ IZT1 = 5 mA IZK mA mA V Min Max CpF Max @ VR = 0 f = 1 MHz Device*** Device Marking Min Max Test Current Izt mA SZ, NZ9F2V4ST5G 2* 2.43 2.63 5 100 1000 1 50 1 −3.5 0 210 SZ, NZ9F2V7ST5G 3* 2.67 2.91 5 100 1000 1 20 1 −3.5 0 210 SZ, NZ9F3V0ST5G 4* 2.94 3.26 5 100 1000 1 10 1 −3.5 0 210 SZ, NZ9F3V3ST5G 5* 3.32 3.53 5 100 1000 1 10 1 −3.5 0 210 SZ, NZ9F3V6ST5G 6* 3.6 3.85 5 100 1000 1 10 1 −3.5 0 210 SZ, NZ9F3V9ST5G A** 3.89 4.16 5 100 1000 1 5 1 −3.5 −2.5 210 SZ, NZ9F4V3ST5G D** 4.17 4.43 5 100 1000 1 5 1 −3.5 0 210 SZ, NZ9F4V7ST5G E** 4.55 4.75 5 100 800 0.5 2 1 −3.5 0.2 150 SZ, NZ9F5V1ST5G F** 4.989 5.2 5 80 500 0.5 2 1.5 −2.7 1.2 130 SZ, NZ9F5V6ST5G J** 5.49 5.73 5 60 200 0.5 1 2.5 −2.0 2.5 115 SZ, NZ9F6V2ST5G K** 6.06 6.33 5 60 100 0.5 1 3 0.4 3.7 110 SZ, NZ9F6V8ST5G L** 6.65 6.93 5 40 60 0.5 0.5 3.5 1.2 4.5 105 SZ, NZ9F7V5ST5G P** 7.28 7.6 5 30 60 0.5 0.5 4 2.5 5.3 100 SZ, NZ9F8V2ST5G Q** 8.02 8.36 5 30 60 0.5 0.5 5 3.2 6.2 90 SZ, NZ9F9V1ST5G R** 8.85 9.23 5 30 60 0.5 0.5 6 3.8 7 80 SZ, NZ9F10VST5G T** 9.77 10.21 5 30 60 0.5 0.1 7 4.5 8 80 SZ, NZ9F11VST5G V** 10.76 11.22 5 30 60 0.5 0.1 8 5.4 9 80 SZ, NZ9F12VST5G Y** 11.74 12.24 5 30 80 0.5 0.1 9 6 10 80 SZ, NZ9F13VST5G 2** 12.91 13.49 5 37 80 0.5 0.1 10 7 11 75 SZ, NZ9F15VST5G 3** 14.34 14.98 5 42 80 0.5 0.1 11 9.2 13 70 SZ, NZ9F16VST5G 4** 15.85 16.51 5 50 80 0.5 0.1 12 10.4 14 65 SZ, NZ9F18VST5G 5** 17.56 18.35 5 50 80 0.5 0.1 14 12.4 16 60 *Rotated 90°. **Rotated 180°. ***SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable. http://onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOD−923 CASE 514AB ISSUE D STYLE 1 DATE 03 SEP 2020 STYLE 2 SCALE 8:1 D −X− NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 5. DIMENSION L WILL NOT EXCEED 0.30mm. −Y− E 1 2X b 0.08 X Y 2 TOP VIEW c HE SIDE VIEW 2X 2X BOTTOM VIEW XM XM STYLE 1 STYLE 2 X M SOLDERING FOOTPRINT* = Specific Device Code = Date Code *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. 1.20 2X INCHES MIN NOM MAX 0.013 0.015 0.016 0.006 0.008 0.010 0.003 0.005 0.007 0.030 0.031 0.033 0.022 0.024 0.026 0.037 0.039 0.041 0.007 REF 0.002 0.004 0.006 GENERIC MARKING DIAGRAM* L L2 2X 0.36 MILLIMETERS MIN NOM MAX 0.34 0.37 0.40 0.15 0.20 0.25 0.07 0.12 0.17 0.75 0.80 0.85 0.55 0.60 0.65 0.95 1.00 1.05 0.19 REF 0.05 0.10 0.15 DIM A b c D E HE L L2 A 0.25 STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE PACKAGE OUTLINE STYLE 2: NO POLARITY DIMENSIONS: MILLIMETERS See Application Note AND8455/D for more mounting details *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: DESCRIPTION: 98AON23284D Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. SOD−923, 1.0X0.6X0.37, MAX HEIGHT 0.40 PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative