P6KE91ARL

P6KE6.8A Series 600 Watt Peak Power Surmetict−40 Transient Voltage Suppressors Unidirectional* The P6KE6.8A series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability and fast response time. These devices are ON Semiconductor ’s exclusive, cost-effective, highly reliable Surmetic axial leaded package and is ideally-suited for use in communication systems, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. http://onsemi.com Cathode Anode Features • • • • • • • • • Working Peak Reverse Voltage Range − 5.8 to 171 V Peak Power − 600 Watts @ 1 ms ESD Rating of Class 3 (>16 KV) per Human Body Model Maximum Clamp Voltage @ Peak Pulse Current Low Leakage < 5 mA above 10 V Maximum Temperature Coefficient Specified UL 497B for Isolated Loop Circuit Protection Response Time is Typically < 1 ns Pb−Free Packages are Available* AXIAL LEAD CASE 017AA PLASTIC MARKING DIAGRAM Mechanical Characteristics CASE: Void-free, Transfer-molded, Thermosetting plastic FINISH: All external surfaces are corrosion resistant and leads are A P6KExxxA YYWW  readily solderable MAXIMUM LEAD TEMPERATURE FOR SOLDERING: 230C, 1/16″ from the case for 10 seconds POLARITY: Cathode indicated by polarity band MOUNTING POSITION: Any MAXIMUM RATINGS Rating Symbol Value Unit Peak Power Dissipation (Note 1) @ TL ≤ 25°C PPK 600 W Steady State Power Dissipation @ TL ≤ 75°C, Lead Length = 3/8 in Derated above TL = 75°C PD 5.0 W 50 mW/°C 20 °C/W Thermal Resistance, Junction−to−Lead RqJL A = Assembly Location P6KExxxA = Device Number xxx = (See Table Page 3) YY = Year WW = Work Week  = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device Package Shipping † Forward Surge Current (Note 2) @ TA = 25°C IFSM 100 A P6KExxxA Axial Lead 1000 Units / Box Operating and Storage Temperature Range TJ, Tstg − 55 to +175 °C P6KExxxAG Axial Lead (Pb−Free) 1000 Units / Box P6KExxxARL Axial Lead 4000/Tape & Reel P6KExxxARLG Axial Lead (Pb−Free) 4000/Tape & Reel Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Nonrepetitive current pulse per Figure 4 and derated above TA = 25°C per Figure 2. 2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. **Please refer to P6KE6.8CA − P6KE200CA for Bidirectional devices. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2005 September, 2005 − Rev. 7 1 Publication Order Number: P6KE6.8A/D P6KE6.8A Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 6) = 50 A) Symbol Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP IR VBR IT QVBR IF Parameter IPP VRWM I Working Peak Reverse Voltage VC VBR VRWM IR VF IT Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current Maximum Temperature Coefficient of VBR IF Forward Current VF Forward Voltage @ IF IPP Uni−Directional TVS http://onsemi.com 2 V P6KE6.8A Series ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 6) = 50 A) Breakdown Voltage VC @ IPP (Note 5) VRWM (Note 3) IR @ VRWM @ IT VC IPP QVBR Volts mA Min Nom Max mA Volts A %/°C VBR (Note 4) (Volts) Device* Device Marking P6KE6.8A, G P6KE7.5A, G P6KE8.2A P6KE9.1A, G P6KE6.8A P6KE7.5A P6KE8.2A P6KE9.1A 5.8 6.4 7.02 7.78 1000 500 200 50 6.45 7.13 7.79 8.65 6.80 7.51 8.2 9.1 7.14 7.88 8.61 9.55 10 10 10 1 10.5 11.3 12.1 13.4 57 53 50 45 0.057 0.061 0.065 0.068 P6KE10A, G P6KE11A, G P6KE12A, G P6KE13A, G P6KE10A P6KE11A P6KE12A P6KE13A 8.55 9.4 10.2 11.1 10 5 5 5 9.5 10.5 11.4 12.4 10 11.05 12 13.05 10.5 11.6 12.6 13.7 1 1 1 1 14.5 15.6 16.7 18.2 41 38 36 33 0.073 0.075 0.078 0.081 P6KE15A, P6KE16A, P6KE18A, P6KE20A, G G G G P6KE15A P6KE16A P6KE18A P6KE20A 12.8 13.6 15.3 17.1 5 5 5 5 14.3 15.2 17.1 19 15.05 16 18 20 15.8 16.8 18.9 21 1 1 1 1 21.2 22.5 25.2 27.7 28 27 24 22 0.084 0.086 0.088 0.09 P6KE22A, P6KE24A, P6KE27A, P6KE30A, G G G G P6KE22A P6KE24A P6KE27A P6KE30A 18.8 20.5 23.1 25.6 5 5 5 5 20.9 22.8 25.7 28.5 22 24 27.05 30 23.1 25.2 28.4 31.5 1 1 1 1 30.6 33.2 37.5 41.4 20 18 16 14.4 0.092 0.094 0.096 0.097 P6KE33A, P6KE36A, P6KE39A, P6KE43A, G G G G P6KE33A P6KE36A P6KE39A P6KE43A 28.2 30.8 33.3 36.8 5 5 5 5 31.4 34.2 37.1 40.9 33.05 36 39.05 43.05 34.7 37.8 41 45.2 1 1 1 1 45.7 49.9 53.9 59.3 13.2 12 11.2 10.1 0.098 0.099 0.1 0.101 P6KE47A, P6KE51A, P6KE56A, P6KE62A, G G G G P6KE47A P6KE51A P6KE56A P6KE62A 40.2 43.6 47.8 53 5 5 5 5 44.7 48.5 53.2 58.9 47.05 51.05 56 62 49.4 53.6 58.8 65.1 1 1 1 1 64.8 70.1 77 85 9.3 8.6 7.8 7.1 0.101 0.102 0.103 0.104 P6KE68A, P6KE75A, P6KE82A, P6KE91A, G G G G P6KE68A P6KE75A P6KE82A P6KE91A 58.1 64.1 70.1 77.8 5 5 5 5 64.6 71.3 77.9 86.5 68 75.05 82 91 71.4 78.8 86.1 95.5 1 1 1 1 92 103 113 125 6.5 5.8 5.3 4.8 0.104 0.105 0.105 0.106 P6KE100A P6KE110A P6KE120A P6KE130A 85.5 94 102 111 5 5 5 5 95 105 114 124 100 110.5 120 130.5 105 116 126 137 1 1 1 1 137 152 165 179 4.4 4 3.6 3.3 0.106 0.107 0.107 0.107 P6KE100A, G P6KE110A, G P6KE120A, G P6KE130A, G P6KE150A, G P6KE150A 128 5 143 150.5 158 1 207 2.9 0.108 P6KE160A, G P6KE160A 136 5 152 160 168 1 219 2.7 0.108 P6KE170A, G P6KE170A 145 5 162 170.5 179 1 234 2.6 0.108 P6KE180A, G P6KE180A 154 5 171 180 189 1 246 2.4 0.108 P6KE200A, G P6KE200A 171 5 190 200 210 1 274 2.2 0.108 3. A transient suppressor is normally selected according to the maximum working peak reverse voltage (VRWM), which should be equal to or greater than the dc or continuous peak operating voltage level. 4. VBR measured at pulse test current IT at an ambient temperature of 25°C 5. Surge current waveform per Figure 4 and derate per Figures 1 and 2. 6. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. *The “G’’ suffix indicates Pb−Free package available. http://onsemi.com 3 PPK , PEAK POWER (kW) 100  NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 4 10 1 0.1 0.1 ms 1 ms 10 ms 100 ms 1 ms PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT @ TA = 25 C P6KE6.8A Series 100 80 60 40 20 0 0 10 ms 25 50 75 100 125 150 175 tP, PULSE WIDTH Figure 1. Pulse Rating Curve Figure 2. Pulse Derating Curve tr ≤ 10 ms PEAK VALUE − IPP 100 VALUE (%) C, CAPACITANCE (pF) 10,000 MEASURED @ ZERO BIAS 1000 HALF VALUE − PULSE WIDTH (tp) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAYS TO 50% OF IPP. IPP 2 50 MEASURED @ VRWM 100 10 0.1 tP 1 10 100 VBR, BREAKDOWN VOLTAGE (VOLTS) 0 1000 0 1 Figure 3. Capacitance versus Breakdown Voltage 3/8″ 3/8″ 5 4 3 2 2 3 t, TIME (ms) 4 Figure 4. Pulse Waveform 1 0.7 0.5 DERATING FACTOR PD, STEADY STATE POWER DISSIPATION (WATTS) 200 TA, AMBIENT TEMPERATURE (C) 0.3 0.2 PULSE WIDTH 10 ms 0.1 0.07 0.05 1 ms 0.03 100 ms 0.02 1 10 ms 0.01 0 0 25 50 75 100 125 150 175 TL, LEAD TEMPERATURE C) 0.1 200 Figure 5. Steady State Power Derating 0.2 0.5 1 2 5 10 D, DUTY CYCLE (%) 20 50 100 Figure 6. Typical Derating Factor for Duty Cycle http://onsemi.com 4 P6KE6.8A Series APPLICATION NOTES RESPONSE TIME minimum lead lengths and placing the suppressor device as close as possible to the equipment or components to be protected will minimize this overshoot. Some input impedance represented by Zin is essential to prevent overstress of the protection device. This impedance should be as high as possible, without restricting the circuit operation. In most applications, the transient suppressor device is placed in parallel with the equipment or component to be protected. In this situation, there is a time delay associated with the capacitance of the device and an overshoot condition associated with the inductance of the device and the inductance of the connection method. The capacitance effect is of minor importance in the parallel protection scheme because it only produces a time delay in the transition from the operating voltage to the clamp voltage as shown in Figure 7. The inductive effects in the device are due to actual turn-on time (time required for the device to go from zero current to full current) and lead inductance. This inductive effect produces an overshoot in the voltage across the equipment or component being protected as shown in Figure 8. Minimizing this overshoot is very important in the application, since the main purpose for adding a transient suppressor is to clamp voltage spikes. The P6KE6.8A series has very good response time, typically < 1 ns and negligible inductance. However, external inductive effects could produce unacceptable overshoot. Proper circuit layout, DUTY CYCLE DERATING The data of Figure 1 applies for non-repetitive conditions and at a lead temperature of 25°C. If the duty cycle increases, the peak power must be reduced as indicated by the curves of Figure 6. Average power must be derated as the lead or ambient temperature rises above 25°C. The average power derating curve normally given on data sheets may be normalized and used for this purpose. At first glance the derating curves of Figure 6 appear to be in error as the 10 ms pulse has a higher derating factor than the 10 ms pulse. However, when the derating factor for a given pulse of Figure 6 is multiplied by the peak power value of Figure 1 for the same pulse, the results follow the expected trend. TYPICAL PROTECTION CIRCUIT Zin LOAD Vin V V Vin (TRANSIENT) VL OVERSHOOT DUE TO INDUCTIVE EFFECTS Vin (TRANSIENT) VL VL Vin td tD = TIME DELAY DUE TO CAPACITIVE EFFECT t t Figure 7. Figure 8. http://onsemi.com 5 P6KE6.8A Series UL RECOGNITION* The entire series including the bidirectional CA suffix has Underwriters Laboratory Recognition for the classification of protectors (QVGV2) under the UL standard for safety 497B and File #E 116110. Many competitors only have one or two devices recognized or have recognition in a non-protective category. Some competitors have no recognition at all. With the UL497B recognition, our parts successfully passed several tests including Strike Voltage Breakdown test, Endurance Conditioning, Temperature test, Dielectric Voltage-Withstand test, Discharge test and several more. Whereas, some competitors have only passed a flammability test for the package material, we have been recognized for much more to be included in their protector category. *Applies to P6KE6.8A, CA − P6KE200A, CA. http://onsemi.com 6 P6KE6.8A Series PACKAGE DIMENSIONS SURMETIC 40, AXIAL LEAD CASE 017AA−01 ISSUE O NOTES: 1. CONTROLLING DIMENSION: INCH 2. LEAD DIAMETER AND FINISH NOT CONTROLLED WITHIN DIMENSION F. 3. CATHODE BAND INDICATES POLARITY B DIM A B D F K D K F INCHES MIN MAX 0.330 0.350 0.130 0.145 0.037 0.043 −−− 0.050 1.000 1.250 A F K http://onsemi.com 7 MILLIMETERS MIN MAX 8.38 8.89 3.30 3.68 0.94 1.09 −−− 1.27 25.40 31.75 P6KE6.8A Series Surmetic are trademarks of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: orderlit@onsemi.com http://onsemi.com 8 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. P6KE6.8A/D