PCP1402-TD-H

Ordering number : ENA2303A PCP1402 Power MOSFET 250V, 2.4Ω, 1.2A, Single N-Channel http://onsemi.com Features  On-resistance RDS(on)=1.8Ω (typ)  Input Capacitance Ciss=210pF (typ)  Halogen free compliance Specifications Absolute Maximum Ratings at Ta = 25C Parameter Drain to Source Voltage Symbol Conditions Value Unit VDSS 250 Gate to Source Voltage VGSS 30 V Drain Current (DC) ID 1.2 A Drain Current (Pulse) IDP PW10s, duty cycle1% 4.8 A Tc=25C 3.5 W Power Dissipation PD When mounted on ceramic substrate (600mm20.8mm) 1.5 W 150 C 55 to +150 C Junction Temperature Tj Storage Temperature Tstg V Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Thermal Resistance Ratings Parameter Symbol Value Unit Junction to Case Steady State RJC 35.7 C /W Junction to Ambient RJA 83.3 C /W When mounted on ceramic substrate (600mm20.8mm) Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Electrical Characteristics at Ta  25C Value Parameter Symbol Conditions Unit min typ max Drain to Source Breakdown Voltage V(BR)DSS ID=1mA, VGS=0V 250 V Zero-Gate Voltage Drain Current IDSS VDS=250V, VGS=0V 1 A Gate to Source Leakage Current IGSS VGS=±30V, VDS=0V 10 A Gate Threshold Voltage VGS(th) VDS=10V, ID=1mA 3.5 V Forward Transconductance gFS VDS=10V, ID=600mA 2.5 1.2 S Continued on next page. ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. Semiconductor Components Industries, LLC, 2014 September, 2014 90914HK TC-00003146/52614TKIM No.A2303-1/5 PCP1402 Continued from preceding page. Value Parameter Symbol Conditions Unit min ID=600mA, VGS=10V Typ max 1.8  Static Drain to Source On-State Resistance RDS(on) Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Turn-ON Delay Time td(on) 7.9 ns Rise Time tr 6.7 ns Turn-OFF Delay Time td(off) 14.5 ns Fall Time tf 30 ns Total Gate Charge Qg 4.2 nC Gate to Source Charge Qgs 1.4 nC Gate to Drain “Miller” Charge Qgd Forward Diode Voltage VSD VDS=20V, f=1MHz 2.4 210 pF 20 pF 7 pF See specified Test Circuit VDS=125V, VGS=10V, ID=1.2A 1.0 IS=1.2A, VGS=0V nC 0.86 1.2 V Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Package PCP, SC-62 SOT-89, TO-243 PCP1402-TD-H Shipping note 1,000 pcs. / reel Pb-Free and Halogen Free Marking LOT No. Device Packing Type:TD QS Ordering & Package Information TD(PCP) Electrical Connection Switching Time Test Circuit 2 1 3 No.A2303-2/5 PCP1402 No.A2303-3/5 PCP1402 No.A2303-4/5 PCP1402 Package Dimensions PCP1402-TD-H SOT-89/PCP-2 CASE 419AW ISSUE O unit : mm 1: Gate 2: Drain 3: Source Recommended Soldering Footprint Note on usage : Since the PCP1402 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.A2303-5/5