PCS2I2305NZF-08-SR

PCS2P2305NZ 3.3V 1:5 Clock Buffer Features One-Input to Five-Output Buffer/Driver Buffers all frequencies from DC to 133.33MHz Low power consumption for mobile applications Less than 32mA at 66.6MHz with unloaded outputs Input-Output delay: 6nS(max) Output-output skew less than 250pS 8-pin SOIC Package Supply Voltage: 3.3V ± 0.3V Commercial and Industrial temperature range Functional Description PCS2P2305NZ is a low-cost high-speed buffer designed to accept one clock input and distribute up to five clocks in mobile PC systems and desktop PC systems. The device operates at 3.3V and outputs can run up to 133.33MHz. PCS2P2305NZ is designed for low EMI and power optimization and consumes less than 32mA at 66.6MHz, making it ideal for the low-power requirements of mobile systems. It is available in an 8-pin SOIC Package over Commercial and Industrial temperature range. Block Diagram BUF_IN OUTPUT1 OUTPUT2 OUTPUT3 OUTPUT4 OUTPUT5 ©2010 SCILLC. All rights reserved. JANUARY 2010 – Rev. 1 Publication Order Number: PCS2P2305/D PCS2P2305NZ Pin Configuration BUF-IN 1 OUTPUT1 2 OUTPUT2 3 GND 4 8 7 OUTPUT5 OUTPUT4 VDD OUTPUT3 PCS2P2305NZ 6 5 Pin Description Pin# 6 4 1 2, 3, 5, 7, 8 Pin Name VDD GND BUF_IN OUTPUT [1:5] Description 3.3V Digital Voltage Supply Ground Input Clock Outputs Absolute Maximum Ratings Parameter Supply Voltage to Ground Potential DC Input Voltage (Except REF) DC Input Voltage (REF) Storage Temperature Max. Soldering Temperature (10 sec) Junction Temperature Static Discharge Voltage (As per JEDEC STD22- A114-B) Min -0.5 -0.5 -0.5 -65 Max +4.6 VDD + 0.5 7 +150 260 150 2000 Unit V V V °C °C °C V Note: These are stress ratings only and functional usage is not implied. Exposure to absolute maximum ratings for prolonged periods can affect device reliability. Rev. 1 | Page 2 of 8 | www.onsemi.com PCS2P2305NZ Operating Conditions Parameter VDD TA CL CIN BUF_IN, OUTPUT [1:5] tPU Supply Voltage Commercial Temp. Industrial Temp. Load Capacitance, Fout < 100MHz Load Capacitance,100MHz < Fout < 133.33MHz Input Capacitance Operating Frequency Power-up time for all VDD’s to reach minimum specified voltage (power ramps must be monotonic) DC 0.05 Description Min 3.0 0 -40 Max 3.6 70 85 30 15 7 133.33 50 Unit V °C °C pF pF pF MHz mS Electrical Characteristics for Commercial and Industrial Temperature Devices Symbol VIL VIH IIL IIH VOL VOH IDD Notes: Parameter Input LOW Voltage 1 1 Test Conditions Min 2.2 Max 0.8 Unit V V µA µA V V Input HIGH Voltage Input LOW Current Input HIGH Current Output LOW Voltage 2 2 VIN = 0V VIN = VDD IOL = 12mA IOH = -12mA Unloaded outputs at 66.66MHz 2.4 50.0 100.0 0.4 Output HIGH Voltage Supply Current Commercial temp. Industrial temp. 30 32 mA 1. BUF_IN input has a threshold voltage of VDD/2. 2. Parameter is guaranteed by design and characterization. It is not 100% tested in production. Switching Characteristics for Commercial and Industrial Temperature Devices Test Conditions Symbol Parameter Min t3 t4 tD Rise Time Fall Time 2 2 1 Typ 1.5 1.5 Max 2 2 55 Unit nS nS % Measured between 0.8V and 2.0V Measured between 2.0V and 0.8V Measured at 1.4V (For an Input Clock Duty Cycle 50%) 2 2 Duty Cycle = t2 ÷ t1 45 50 t5 Output to Output Skew All outputs equally loaded ±250 pS t6 Propagation Delay, BUF_IN Rising Edge to 2 OUTPUT Rising Edge Measured at VDD/2 4 6 nS Notes: 1. All parameters specified with loaded outputs. 2. Parameter is guaranteed by design and characterization. It is not 100% tested in production. Rev. 1 | Page 3 of 8 | www.onsemi.com PCS2P2305NZ Switching Waveforms Duty Cycle Timing t1 t2 1.4V OUTPUT 1.4V 1.4V All Outputs Rise/Fall Time 2V 0.8V 2V 0.8V VDD OUTPUT t3 t4 0V Output-Output Skew 1.4V OUTPUT 1.4V OUTPUT t5 Input-Output Propagation Delay VDD/2 INPUT VDD/2 OUTPUT Rev. 1 | Page 4 of 8 | www.onsemi.com PCS2P2305NZ Test Circuit +3.3V BUF-IN VDD 0.1uF PCS2P2305NZ GND OUTPUT CL Rev. 1 | Page 5 of 8 | www.onsemi.com PCS2P2305NZ Package Information 8-lead (150-mil) SOIC Package E H D A2 A C e B A 1 D L Dimensions Symbol Min A1 A A2 B C D E e H L θ 0.004 0.053 0.049 0.012 0.007 Inches Max 0.010 0.069 0.059 0.020 0.010 Millimeters Min Max 0.10 1.35 1.25 0.31 0.18 4.90 BSC 3.91 BSC 1.27 BSC 6.00 BSC 0.41 0° 1.27 8° 0.25 1.75 1.50 0.51 0.25 0.193 BSC 0.154 BSC 0.050 BSC 0.236 BSC 0.016 0° 0.050 8° Rev. 1 | Page 6 of 8 | www.onsemi.com PCS2P2305NZ Ordering Code Part Number PCS2P2305NZF-08-ST PCS2P2305NZF-08-SR PCS2I2305NZF-08-ST PCS2I2305NZF-08-SR Marking 2P2305NZF 2P2305NZF 2I2305NZF 2I2305NZF Package Type 08-pin 150-mil SOIC, Pb Free 08-pin 150-mil SOIC, Tape and Reel, Pb Free 08-pin 150-mil SOIC, Pb Free 08-pin 150-mil SOIC, Tape and Reel, Pb Free Temperature Commercial Commercial Industrial Industrial Device Ordering Information PCS2P2305NZF-08-SR R = Tape & Reel, T = Tube or Tray O = SOT S = SOIC T = TSSOP A = SSOP V = TVSOP B = BGA Q = QFN DEVICE PIN COUNT U = MSOP E = TQFP L = LQFP U = MSOP P = PDIP D = QSOP X = SC-70 F = LEAD FREE AND RoHS COMPLIA NT PART G = GREEN PACKAGE, LEAD FREE, and RoHS PART NUMBER X= Automotive I= Industrial P or n/c = Commercial (-40C to +125C) (-40C to +85C) (0C to +70C) 1 = Clock Generator 2 = Non PLL based 3 = EMI Reduction 4 = DDR support products 5 = STD Zero Delay Buffer 6 = Power Management 7 = Power Management 8 = Power Management 9 = Hi Performance 0 = Reserved ON Semiconductor Mixed Signal Product Licensed under US patent #5,488,627, #6,646,463 and #5,631,920. Rev. 1 | Page 7 of 8 | www.onsemi.com PCS2P2305NZ Note: This product utilizes US Patent #6,646,463 Impedance Emulator Patent issued to PulseCore Semiconductor, dated 11-11-2003. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifical ly disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems i ntended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a s ituation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC an d its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses , and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, ev en if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. U.S Patent Pending; Timing-Safe and Active Bead are trademarks of PulseCore Semiconductor, a wholly owned subsidiary of ON Semiconductor. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative