DATA SHEET
www.onsemi.com
NPN Epitaxial Silicon
Transistor
General Purpose Transistor
TO−92−3
CASE 135AR
PN2222
1
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
2
3
1. Emitter
2. Base
3. Collector
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Parameter
Symbol
Value
Unit
Collector−Base Voltage
VCBO
60
V
Collector−Emitter Voltage
VCEO
30
V
Emitter−Base Voltage
VEBO
5
V
Collector Current
IC
600
mA
Collector Power Dissipation
PC
625
mW
Junction Temperature
TJ
150
°C
Storage Temperature
TSTG
−55 to 150
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
MARKING DIAGRAM
APN
2222
YWW
PN2222 = Specific Device Code
A
= Assembly Location
Y
= Year
WW = Work Week
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
© Semiconductor Components Industries, LLC, 2018
September, 2022 − Rev. 3
1
Publication Order Number:
PN2222T/D
PN2222
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Unit
VCBO
Collector−Base Breakdown Voltage
IC = 10 mA, IE = 0
60
V
VCEO
Collector−Emitter Breakdown Voltage
IC = 10 mA, IB = 0
30
V
VEBO
Emitter−Base Breakdown Voltage
IE = 10 mA, IC = 0
5
V
ICBO
Collector Cut−Off Current
VCB = 50 V, IE = 0
IEBO
Emitter Cut−Off Current
VEB = 3 V, IC = 0
hFE
DC Current Gain
VCE = 10 V, IC = 0.1 mA
35
VCE = 10 V, IC = 150 mA*
100
0.01
mA
10
nA
300
VCE(sat)
Collector−Emitter Saturation Voltage*
IC = 500 mA, IB = 50 mA
1
V
VBE(sat)
Base−Emitter Saturation Voltage*
IC = 500 mA, IB = 50 mA
2
V
fT
Current Gain Bandwidth Product
VCE = 20 V, IC = 20 mA, f = 100 MHz
Output Capacitance
VCB = 10 V, IE = 0, f = 1 MHz
Cob
300
MHz
8
pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
*Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%
ORDERING INFORMATION
Top Mark
Package
Shipping†
PN2222TA
PN2222
TO−92−3 (Pb−Free)
2,000 Units/ Fan−Fold
PN2222TF
PN2222
TO−92−3 (Pb−Free)
2,000 Units/ Tape & Reel
Part Number
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification Brochure, BRD8011/D.
www.onsemi.com
2
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−92 3 4.83x4.76 LEADFORMED
CASE 135AR
ISSUE O
DOCUMENT NUMBER:
DESCRIPTION:
98AON13879G
DATE 30 SEP 2016
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
TO−92 3 4.83X4.76 LEADFORMED
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative