MMBT2907A
PZT2907A
C
C
E
E
C
B
TO-92
B
B
SOT-23
E
C
SOT-223
Mark: 2F
PNP General Purpose Amplifier
This device is designed for use as a general purpose amplifier
and switch requiring collector currents to 500 mA. Sourced
from Process 63.
Absolute Maximum Ratings*
Symbol
TA = 25°C unless otherwise noted
Parameter
Value
Units
VCEO
Collector-Emitter Voltage
60
V
VCBO
Collector-Base Voltage
60
V
VEBO
Emitter-Base Voltage
5.0
V
IC
Collector Current - Continuous
800
mA
TJ, Tstg
Operating and Storage Junction Temperature Range
-55 to +150
°C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
3) All voltages (V) and currents (A) are negative polarity for PNP transistors.
Thermal Characteristics
Symbol
PD
TA = 25°C unless otherwise noted
Characteristic
RθJC
Total Device Dissipation
Derate above 25°C
Thermal Resistance, Junction to Case
RθJA
Thermal Resistance, Junction to Ambient
Max
*MMBT2907A
350
2.8
**PZT2907A
1,000
8.0
200
357
125
*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."
**Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2.
1998 Fairchild Semiconductor Corporation
Units
PN2907A
625
5.0
83.3
mW
mW/°C
°C/W
°C/W
PN2907A / MMBT2907A / PZT2907A
PN2907A
(continued)
Electrical Characteristics
Symbol
TA = 25°C unless otherwise noted
Parameter
Test Conditions
Min
Max
Units
OFF CHARACTERISTICS
V(BR)CEO
Collector-Emitter Breakdown Voltage*
IC = 10 mA, IB = 0
60
V
V(BR)CBO
Collector-Base Breakdown Voltage
IC = 10 µA, IE = 0
60
V
V(BR)EBO
Emitter-Base Breakdown Voltage
IE = 10 µA, IC = 0
5.0
IB
Base Cutoff Current
VCB = 30 V, VEB = 0.5 V
50
nA
ICEX
Collector Cutoff Current
VCE = 30 V, VBE = 0.5 V
50
nA
ICBO
Collector Cutoff Current
VCB = 50 V, IE = 0
VCB = 50 V, IE = 0, TA = 150°C
0.02
20
µA
µA
V
ON CHARACTERISTICS
hFE
DC Current Gain
VCE(sat)
Collector-Emitter Saturation Voltage*
VBE(sat)
Base-Emitter Saturation Voltage
IC = 0.1 mA, VCE = 10 V
IC = 1.0 mA, VCE = 10 V
IC = 10 mA, VCE = 10 V
IC = 150 mA, VCE = 10 V*
IC = 500 mA, VCE = 10 V*
IC = 150 mA, IB = 15 mA
IC = 500 mA, IB = 50 mA
IC = 150 mA, IB = 15 mA*
IC = 500 mA, IB = 50 mA
75
100
100
100
50
IC = 50 mA, VCE = 20 V,
f = 100 MHz
VCB = 10 V, IE = 0,
f = 100 kHz
VEB = 2.0 V, IC = 0,
f = 100 kHz
200
300
0.4
1.6
1.3
2.6
V
V
V
V
SMALL SIGNAL CHARACTERISTICS
fT
Current Gain - Bandwidth Product
Cobo
Output Capacitance
Cibo
Input Capacitance
MHz
8.0
pF
30
pF
45
ns
SWITCHING CHARACTERISTICS
ton
Turn-on Time
VCC = 30 V, IC = 150 mA,
td
Delay Time
IB1 = 15 mA
tr
Rise Time
toff
Turn-off Time
VCC = 6.0 V, IC = 150 mA
100
ns
ts
Storage Time
IB1 = IB2 = 15 mA
80
ns
tf
Fall Time
30
ns
10
ns
40
ns
*Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%
NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors.
Spice Model
PNP (Is=650.6E-18 Xti=3 Eg=1.11 Vaf=115.7 Bf=231.7 Ne=1.829 Ise=54.81f Ikf=1.079 Xtb=1.5 Br=3.563 Nc=2
Isc=0 Ikr=0 Rc=.715 Cjc=14.76p Mjc=.5383 Vjc=.75 Fc=.5 Cje=19.82p Mje=.3357 Vje=.75 Tr=111.3n Tf=603.7p
Itf=.65 Vtf=5 Xtf=1.7 Rb=10)
PN2907A / MMBT2907A / PZT2907A
PNP General Purpose Amplifier
(continued)
500
VCE = 5V
400
125 °C
300
200
100
0
0.1
25 °C
- 40 °C
0.3
1
3
10
30
100
I C - COLLECTOR CURRENT (mA)
300
Base-Emitter Saturation
Voltage vs Collector Current
1
- 40 °C
0.8
25 °C
0.6
125 °C
0.4
β = 10
0.2
0
1
10
100
I C - COLLECTOR CURRENT (mA)
500
VCESAT - COLLECTOR EMITTE R VOLTAGE (V)
Typical Pulsed Current Gain
vs Collector Current
Collector-Emitter Saturation
Voltage vs Collector Current
0.5
β = 10
0.4
0.3
25 °C
0.2
125 °C
0.1
- 40 °C
0
V BE( ON)- BAS E EMITTER ON VOLTAGE (V)
V BESAT - BASE EMITTER VOLTAGE (V)
h FE - TYPICAL PULSED CURRENT GAIN
Typical Characteristics
1
500
Base Emitter ON Voltage vs
Collector Current
1
0.8
0.6
0.4
- 40 °C
25 °C
125 °C
VCE = 5V
0.2
0
0.1
1
10
I C - COLLECTOR CURRE NT (mA)
25
Input and Output Capacitance
vs Reverse Bias Voltage
Collector-Cutoff Current
vs Ambient Temperature
20
100
V CB = 35V
CAPACITANCE (pF)
I CBO - COLLE CTOR CURRENT (nA)
10
100
I C - COLLECTOR CURRE NT (mA)
10
1
0.1
0.01
25
50
75
100
T A - AMBIE NT TEMP ERATURE (° C)
125
16
12
C ib
8
4
0
0.1
C ob
1
10
REVERSE BIAS VOLTAGE (V)
50
PN2907A / MMBT2907A / PZT2907A
PNP General Purpose Amplifier
(continued)
Typical Characteristics
(continued)
Switching Times
vs Collector Current
250
I B1 = I B2 =
Turn On and Turn Off Times
vs Collector Current
500
Ic
I B1 = I B2 =
10
400
200
V cc = 15 V
ts
150
TIME (nS)
TIME (nS)
V cc = 15 V
100
tr
300
200
tf
t off
100
50
t on
td
0
10
100
I C - COLLECTOR CURRENT (mA)
0
10
1000
100
I C - COLLECTOR CURRENT (mA)
1
50
PD - POWER DISSIPATION (W)
I B1 - TURN 0N BASE CURRENT (mA)
1000
Power Dissipation vs
Ambient Temperature
Rise Time vs Collector
and Turn On Base Currents
20
10
Ic
10
SOT-223
0.75
t r = 15 V
5
30 ns
TO-92
0.5
SOT-23
0.25
2
60 ns
1
10
100
I C - COLLECTOR CURRENT (mA)
500
0
0
25
50
75
100
TEMPERATURE ( oC)
125
150
PN2907A / MMBT2907A / PZT2907A
PNP General Purpose Amplifier
(continued)
hoe
h re
2
h fe
1
0.5
h ie
0.2
V CE = -10 V
T A = 25 oC
0.1_
1
_
_
_
_
2
5
10
20
I C - COLLECTOR CURRENT (mA)
_
50
CHAR. RELATIVE TO VALUES AT VCE = -10V
Common Emitter Characteristics
5
CHAR. RELATIVE TO VALUES AT TA = 25oC
CHAR. RELATIVE TO VALUES AT I C= -10mA
Typical Common Emitter Characteristics
(f = 1.0kHz)
Common Emitter Characteristics
1.3
1.2
h re and hoe
1.1
1
h ie
0.9
I C = -10mA
T A = 25oC
h fe
0.8
-4
-8
-12
-16
V CE - COLLECTOR VOLTAGE (V)
Common Emitter Characteristics
1.5
I C = -10mA
1.4 V = -10 V
CE
1.3
1.2
h fe
h ie
h re
hoe
1.1 hoe
1
0.9
0.8
h re
h ie
0.7
0.6
0.5
-40
h re
h ie
h fe
hoe
h fe
-20
0
20
40
60
80
T A - AMBIENT TEMPERATURE ( o C)
100
-20
PN2907A / MMBT2907A / PZT2907A
PNP General Purpose Amplifier
(continued)
Test Circuits
- 30 V
200 Ω
Ω
1.0 KΩ
0
- 16 V
50 Ω
≤ 200ns
FIGURE 1: Saturated Turn-On Switching Time Test Circuit
1.5 V
1 KΩ
Ω
NOTE: BVEBO = 5.0 V
- 6.0 V
37 Ω
Ω
1.0 KΩ
0
- 30 V
50 Ω
≤ 200ns
FIGURE 2: Saturated Turn-Off Switching Time Test Circuit
PN2907A / MMBT2907A / PZT2907A
PNP General Purpose Amplifier
TO-92 Tape and Reel Data
TO-92 Packaging
Configuration: Figure 1.0
TAPE and REEL OPTION
FSCINT Label sample
See Fig 2.0 for various
Reeling Styles
FAIRCHILD SEMICONDUCTOR CORPORATION
LOT:
CBVK741B019
PN2222N
NSID:
D/C1:
HTB:B
QTY: 10000
SPEC:
D9842
SPEC REV:
FSCINT
Label
B2
QA REV:
5 Reels per
Intermediate Box
(FSCINT)
Customized
Label
F63TNR Label sample
LOT: CBVK741B019
FSID: PN222N
D/C1: D9842
D/C2:
F63TNR
Label
QTY: 2000
SPEC:
QTY1:
QTY2:
SPEC REV:
CPN:
N/F: F
Customized
Label
(F63TNR)3
375mm x 267mm x 375mm
Intermediate Box
TO-92 TNR/AMMO PACKING INFROMATION
Packing
Style
Quantity
EOL code
Reel
A
2,000
D26Z
E
2,000
D27Z
Ammo
M
2,000
D74Z
P
2,000
D75Z
AMMO PACK OPTION
See Fig 3.0 for 2 Ammo
Pack Options
FSCINT
Label
Unit weight
= 0.22 gm
Reel weight with components
= 1.04 kg
Ammo weight with components = 1.02 kg
Max quantity per intermediate box = 10,000 units
327mm x 158mm x 135mm
Immediate Box
Customized
Label
(TO-92) BULK PACKING INFORMATION
EOL
CODE
DESCRIPTION
QUANTITY
TO-18 OPTION STD
NO LEAD CLIP
2.0 K / BOX
J05Z
TO-5 OPTION STD
NO LEAD CLIP
1.5 K / BOX
NO LEADCLIP
2.0 K / BOX
NO LEADCLIP
2.0 K / BOX
TO-92 STANDARD
STRAIGHT FOR: PKG 92,
94 (NON PROELECTRON
SERIES), 96
L34Z
TO-92 STANDARD
STRAIGHT FOR: PKG 94
(PROELECTRON SERIES
BCXXX, BFXXX, BSRXXX),
97, 98
Customized
Label
F63TNR
Label
333mm x 231mm x 183mm
Intermediate Box
BULK OPTION
LEADCLIP
DIMENSION
J18Z
NO EOL
CODE
5 Ammo boxes per
Intermediate Box
See Bulk Packing
Information table
Anti-static
Bubble Sheets
FSCINT Label
2000 units per
EO70 box for
std option
114mm x 102mm x 51mm
Immediate Box
5 EO70 boxes per
intermediate Box
530mm x 130mm x 83mm
Intermediate box
Customized
Label
FSCINT Label
10,000 units maximum
per intermediate box
for std option
©2001 Fairchild Semiconductor Corporation
March 2001, Rev. B1
TO-92 Tape and Reel Data, continued
TO-92 Reeling Style
Configuration: Figure 2.0
Machine Option “A” (H)
Machine Option “E” (J)
Style “A”, D26Z, D70Z (s/h)
Style “E”, D27Z, D71Z (s/h)
TO-92 Radial Ammo Packaging
Configuration: Figure 3.0
FIRST WIRE OFF IS COLLECTOR
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON TOP
ORDER STYLE
D74Z (M)
FIRST WIRE OFF IS EMITTER (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
FIRST WIRE OFF IS EMITTER
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
ORDER STYLE
D75Z (P)
FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON TOP
September 1999, Rev. B
TO-92 Tape and Reel Data, continued
TO-92 Tape and Reel Taping
Dimension Configuration: Figure 4.0
Hd
P
Pd
b
Ha
W1
d
L
H1 HO
L1
S
WO
t
W2
W
t1
P1 F1
DO
P2
PO
User Direction of Feed
TO-92 Reel
Configuration: Figure 5.0
ITEM DESCRIPTION
SYMBOL
DIMENSION
Base of Package to Lead Bend
b
0.098 (max)
Component Height
Ha
0.928 (+/- 0.025)
Lead Clinch Height
HO
0.630 (+/- 0.020)
Component Base Height
H1
0.748 (+/- 0.020)
Component Alignment ( side/side )
Pd
0.040 (max)
Component Alignment ( front/back )
Hd
0.031 (max)
Component Pitch
P
0.500 (+/- 0.020)
Feed Hole Pitch
PO
0.500 (+/- 0.008)
Hole Center to First Lead
P1
0.150 (+0.009, -0.010)
Hole Center to Component Center
P2
0.247 (+/- 0.007)
Lead Spread
F1/F2
0.104 (+/- 0 .010)
Lead Thickness
d
0.018 (+0.002, -0.003)
Cut Lead Length
L
0.429 (max)
Taped Lead Length
L1
0.209 (+0.051, -0.052)
Taped Lead Thickness
t
0.032 (+/- 0.006)
Carrier Tape Thickness
t1
0.021 (+/- 0.006)
Carrier Tape Width
W
0.708 (+0.020, -0.019)
Hold - down Tape Width
WO
0.236 (+/- 0.012)
Hold - down Tape position
W1
0.035 (max)
Feed Hole Position
W2
0.360 (+/- 0.025)
Sprocket Hole Diameter
DO
0.157 (+0.008, -0.007)
Lead Spring Out
S
0.004 (max)
Note : All dimensions are in inches.
ELECT ROSTATIC
SEN SITIVE D EVICES
D4
D1
D2
F63TNR Label
ITEM DESCRIPTION
SYSMBOL
MINIMUM
MAXIMUM
Reel Diameter
D1
13.975
14.025
Arbor Hole Diameter (Standard)
D2
1.160
1.200
D2
0.650
0.700
Customized Label
(Small Hole)
W1
Core Diameter
D3
3.100
3.300
Hub Recess Inner Diameter
D4
2.700
3.100
Hub Recess Depth
W1
0.370
0.570
Flange to Flange Inner Width
W2
1.630
Hub to Hub Center Width
W3
1.690
2.090
W3
W2
Note: All dimensions are inches
D3
July 1999, Rev. A
TO-92 Package Dimensions
TO-92 (FS PKG Code 92, 94, 96)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.1977
©2000 Fairchild Semiconductor International
January 2000, Rev. B
SOT-23 Tape and Reel Data
SOT-23 Packaging
Configuration: Figure 1.0
Customized Label
Packaging Description:
SOT-23 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
3,000 units per 7" or 177cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13"
or 330cm diameter reel. This and some other options are
described in the Packaging Information table.
Antistatic Cover Tape
Human Readable
Label
These full reels are individually labeled and placed inside
a standard intermediate made of recyclable corrugated
brown paper with a Fairchil d logo printing. One pizza box
contains eight reels maximum. And these intermediate
boxes are placed inside a labeled shipping box which
comes in different sizes depending on the number of parts
shipped.
Embossed
Carrier Tape
3P
3P
3P
3P
SOT-23 Packaging Information
Packaging Option
Packaging type
Qty per Reel/Tube/Bag
Standard
(no flow code)
TNR
3,000
D87Z
7" Dia
13"
187x107x183
343x343x64
Max qty per Box
24,000
30,000
Weight per unit (gm)
0.0082
0.0082
Weight per Reel (kg)
0.1175
0.4006
Reel Size
Box Dimension (mm)
SOT-23 Unit Orientation
TNR
10,000
343mm x 342mm x 64mm
Intermediate box for L87Z Option
Human Readable Label
Note/Comments
Human Readable Label sample
H uman readable
Label
187mm x 107mm x 183mm
Intermediate Box for Standard Option
SOT-23 Tape Leader and Trailer
Configuration: Figure 2.0
Carrier Tape
Cover Tape
Components
Trailer Tape
300mm minimum or
75 empt y poc kets
©2000 Fairchild Semiconductor International
Leader Tape
500mm minimum or
125 empty pockets
September 1999, Rev. C
SOT-23 Tape and Reel Data, continued
SOT-23 Embossed Carrier Tape
Configuration: Figure 3.0
P0
P2
D1
D0
T
E1
W
F
E2
Wc
B0
Tc
A0
P1
K0
User Direction of Feed
Dimensions are in millimeter
Pkg type
A0
B0
SOT-23
(8mm)
3.15
+/-0.10
2.77
+/-0.10
W
8.0
+/-0.3
D0
D1
E1
E2
1.55
+/-0.05
1.125
+/-0.125
1.75
+/-0.10
F
6.25
min
3.50
+/-0.05
P1
P0
4.0
+/-0.1
4.0
+/-0.1
K0
T
1.30
+/-0.10
0.228
+/-0.013
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
Wc
0.06
+/-0.02
0.5mm
maximum
20 deg maximum
Typical
component
cavity
center line
B0
5.2
+/-0.3
Tc
0.5mm
maximum
20 deg maximum component rotation
Typical
component
center line
Sketch A (Side or Front Sectional View)
A0
Component Rotation
Sketch C (Top View)
Component lateral movement
Sketch B (Top View)
SOT-23 Reel Configuration: Figure 4.0
Component Rotation
W1 Measured at Hub
Dim A
Max
Dim A
max
See detail AA
Dim N
7" Diameter Option
B Min
Dim C
See detail AA
W3
13" Diameter Option
Dim D
min
W2 max Measured at Hub
DETAIL AA
Dimensions are in inches and millimeters
Tape Size
Reel
Option
Dim A
Dim B
Dim C
Dim D
Dim N
Dim W1
Dim W2
Dim W3 (LSL-USL)
8mm
7" Dia
7.00
177.8
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
2.165
55
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 – 0.429
7.9 – 10.9
8mm
13" Dia
13.00
330
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
4.00
100
0.331 +0.059/-0.000
8.4 +1.5/0
0.567
14.4
0.311 – 0.429
7.9 – 10.9
September 1999, Rev. C
SOT-23 Package Dimensions
SOT-23 (FS PKG Code 49)
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.0082
©2000 Fairchild Semiconductor International
September 1998, Rev. A1
SOT-223 Tape and Reel Data
SOT-223 Packaging
Configuration: Figure 1.0
Customized Label
Packaging Description:
F63TNR Label
Antistatic Cover Tape
SOT-223 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
2,500 units per 13" or 330cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or
177cm diameter reel. This and some other options are
further described in the Packaging Information table.
These full reels are individually barcode labeled and
placed inside a standard intermediate box (illustrated in
figure 1.0) made of recyclable corrugated brown paper.
One box contains two reels maximum. And these boxes
are placed inside a barcode labeled shipping box which
comes in different sizes depending on the number of parts
shipped.
Static Dissipative
Embossed Carrier Tape
F852
014
F852
014
F852
014
F852
014
SOT-223 Packaging Information
Packaging Option
Packaging type
Qty per Reel/Tube/Bag
Reel Size
Box Dimension (mm)
Standard
(no flow code)
TNR
2,500
D84Z
SOT-223 Unit Orientation
TNR
500
13" Dia
7" Dia
343x64x343
184x187x47
Max qty per Box
5,000
1,000
Weight per unit (gm)
0.1246
0.1246
Weight per Reel (kg)
0.7250
0.1532
343mm x 342mm x 64mm
Intermediate box for Standard
F63TNR Label
Note/Comments
F63TNR Label
F63TNR Label sample
184mm x 184mm x 47mm
Pizza Box for D84Z Option
SOT-223 Tape Leader and Trailer
Configuration: Figure 2.0
LOT: CBVK741B019
QTY: 3000
FSID: PN2222A
SPEC:
D/C1: D9842
D/C2:
QTY1:
QTY2:
SPEC REV:
CPN:
N/F: F
(F63TNR)3
Carrier Tape
Cover Tape
Components
Trailer Tape
300mm minimum or
38 empty pockets
©2000 Fairchild Semiconductor International
Leader Tape
500mm minimum or
62 empty pockets
September 1999, Rev. B
SOT-223 Tape and Reel Data, continued
SOT-223 Embossed Carrier Tape
Configuration: Figure 3.0
P0
D0
T
E1
F
K0
Wc
W
E2
B0
Tc
A0
D1
P1
User Direction of Feed
Dimensions are in millimeter
Pkg type
SOT-223
(12mm)
A0
6.83
+/-0.10
B0
7.42
+/-0.10
W
12.0
+/-0.3
D0
D1
1.55
+/-0.05
1.50
+/-0.10
E1
E2
1.75
+/-0.10
F
10.25
min
P1
5.50
+/-0.05
P0
8.0
+/-0.1
4.0
+/-0.1
K0
1.88
+/-0.10
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
T
Wc
0.292
+/0.0130
9.5
+/-0.025
0.06
+/-0.02
0.5mm
maximum
20 deg maximum
Typical
component
cavity
center line
B0
Tc
0.5mm
maximum
20 deg maximum component rotation
Typical
component
center line
Sketch A (Side or Front Sectional View)
A0
Component Rotation
Sketch C (Top View)
Component lateral movement
Sketch B (Top View)
SOT-223 Reel Configuration: Figure 4.0
Component Rotation
W1 Measured at Hub
Dim A
Max
Dim A
max
See detail AA
Dim N
7" Diameter Option
B Min
Dim C
See detail AA
W3
13" Diameter Option
Dim D
min
W2 max Measured at Hub
DETAIL AA
Dimensions are in inches and millimeters
Tape Size
Reel
Option
Dim A
Dim B
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
5.906
150
0.488 +0.078/-0.000
12.4 +2/0
0.724
18.4
0.469 – 0.606
11.9 – 15.4
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
7.00
178
0.488 +0.078/-0.000
12.4 +2/0
0.724
18.4
0.469 – 0.606
11.9 – 15.4
12mm
7" Dia
7.00
177.8
12mm
13" Dia
13.00
330
Dim C
Dim D
Dim N
Dim W1
Dim W2
Dim W3 (LSL-USL)
July 1999, Rev. B
SOT-223 Package Dimensions
SOT-223 (FS PKG Code 47)
1:1
Scale 1:1 on letter size paper
Part Weight per unit (gram): 0.1246
©2000 Fairchild Semiconductor International
September 1999, Rev. C
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
FACT Quiet Series™
FAST
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
PowerTrench
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER
SMART START™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
UHC™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. G
工商网监
湘ICP备2023018690号
