PN3567_D26Z

PN3567 PN3567 NPN General Purpose Amplifier • This device is for use as a medium amplifier and switch requiring collector currents up 300mA. • Sourced from process 19. TO-92 1 1. Emitter 2. Base 3. Collector Absolute Maximum Ratings TA=25°C unless otherwise noted Symbol VCEO Collector-Emitter Voltage Parameter Value 40 VCBO Collector-Base Voltage 80 V VEBO Emitter-Base Voltage 5 V IC Collector Current 600 mA TJ, TSTG Operating and Storage Junction Temperature Range - 55 ~ 150 °C - Continuous Units V Electrical Characteristics TA=25°C unless otherwise noted Symbol Parameter Off Characteristics V(BR)CEO Collector-Emitter Breakdown Voltage * Test Condition Min. Typ. Max. Units IC = 30mA, IB = 0 40 V V(BR)CBO Collector-Base Breakdown Voltage IC = 100µA, IE = 0 80 V 5 V(BR)EBO Emitter-Base Breakdown Voltage IE = 10µA, IC = 0 ICBO Collector Cut-off Current VCB = 40V, IE = 0 VCB = 40V, IE = 0, TA = 75°C 50 5 nA µA IEBO Emitter Cut-off Current VEB = 4V, IC = 0 25 nA On Characteristics hFE DC Current Gain VCE = 1V, IC = 150mA VCE = 1V, IC = 30mA 40 40 V 120 VCE(sat) Collector-Emitter Saturation Voltage * IC = 150mA, IB = 15mA 0.25 V VBE(on) Base-Emitter On Voltage VCE = 1V, IC = 150mA 1.1 V VCB = 10V, IE = 0 20 pF VEB = 0.5V, IC = 0 80 Small Signal Characteristics Cobo Output Capacitance Cibo Input Capacitance * Pulse Test: Pulse Width ≤ 300ms, Duty Cycle ≤ 2.0% ©2002 Fairchild Semiconductor Corporation Rev. A1, November 2002 Symbol PD Total Device Dissipation Derate above 25°C Parameter Max. 625 5 Units mW mW/°C RθJA Thermal Resistance, Junction to Ambient 83.3 °C/W RθJC Thermal Resistance, Junction to Case 200 °C/W ©2002 Fairchild Semiconductor Corporation Rev. A1, November 2002 PN3567 Thermal Characteristics TA=25°C unless otherwise noted PN3567 Package Dimensions TO-92 +0.25 4.58 ±0.20 4.58 –0.15 ±0.10 14.47 ±0.40 0.46 1.27TYP [1.27 ±0.20] 1.27TYP [1.27 ±0.20] ±0.20 (0.25) +0.10 0.38 –0.05 1.02 ±0.10 3.86MAX 3.60 +0.10 0.38 –0.05 (R2.29) Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. A1, November 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT™ ActiveArray™ FACT Quiet series™ Bottomless™ FAST® FASTr™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET® VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. ©2002 Fairchild Semiconductor Corporation Rev. I1