PN4092_D26Z

PN4091 / 4092 / 4093 / MMBF4091 / 4092 / 4093 MMBF4091 MMBF4092 MMBF4093 PN4091 PN4092 PN4093 G D G S TO-92 S SOT-23 D Mark: 61J / 61K / 61L NOTE: Source & Drain are interchangeable N-Channel Switch This device is designed for low level analog switching, sample and hold circuits and chopper stabalized amplifiers. Sourced from Process 51. See J111 for characteristics. Absolute Maximum Ratings* Symbol TA = 25°C unless otherwise noted Parameter Value Units VDG Drain-Gate Voltage 40 V VGS Gate-Source Voltage - 40 V IGF Forward Gate Current 50 mA TJ ,Tstg Operating and Storage Junction Temperature Range -55 to +150 °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations Thermal Characteristics Symbol PD TA = 25°C unless otherwise noted Characteristic RθJC Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case RθJA Thermal Resistance, Junction to Ambient *Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06." 1997 Fairchild Semiconductor Corporation Max Units PN4091-4093 625 5.0 125 *MMBF4091-4093 350 2.8 357 556 mW mW/°C °C/W °C/W (continued) Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter Test Conditions Min Max Units - 10 - 7.0 - 5.0 - 200 - 400 200 200 200 V V V pA nA pA pA pA 400 nA 400 nA 400 nA 0.2 0.2 0.2 30 50 80 mA mA mA V V V Ω Ω Ω VDS = VGS = 0, f= 1.0 kHz 30 50 80 16 Ω Ω Ω pF 5.0 pF 25 35 60 ns ns ns 40 60 80 ns ns ns OFF CHARACTERISTICS V(BR)GSS Gate-Source Breakdown Voltage IG = 1.0 µA, VDS = 0 VGS(off) Gate-Source Cutoff Voltage VDS = 20 V, ID = 1.0 nA IDGO Drain-Gate Leakage Current ID(off) Drain Cutoff Leakage Current VDG = 20 V, IS = 0 VDG = 20 V, IS = 0, TA = 150°C 4091 VDS = 20 V, VGS = - 12 V 4092 VDS = 20 V, VGS = - 8.0 V 4093 VDS = 20 V, VGS = - 6.0 V VDS = 20 V, VGS = -12 V, 4091 TA = 150°C VDS = 20 V, VGS= - 8.0 V, 4092 TA = 150°C VDS = 20 V, VGS = - 6.0 V, 4093 TA = 150°C - 40 4091 4092 4093 - 5.0 - 2.0 - 1.0 V ON CHARACTERISTICS IDSS Zero-Gate Voltage Drain Current* VDS = 20 V, VGS = 0 VDS(on) Drain-Source On Voltage rDS(on) Drain-Source On Resistance ID = 6.6 mA, VGS = 0 ID = 4.0 mA, VGS = 0 ID = 2.5 mA, VGS = 0 ID = 1.0 mA, VGS = 0 4091 4092 4093 4091 4092 4093 4091 4092 4093 30 15 8.0 SMALL-SIGNAL CHARACTERISTICS rds(on) Drain-Source On Resistance Ciss Input Capacitance 4091 4092 4093 VDS = 20, VGS = 0, f = 1.0 MHz Crss Reverse Transfer Capacitance VGS = - 20 V, f = 1.0 MHz SWITCHING CHARACTERISTICS ton Turn-On Time toff Turn-Off Time *Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 1.0% ID(on) = 12 mA ID(on) = 6.0 mA ID(on) = 3.0 mA VGS(off) = 12 V VGS(off) = 6.0 V VGS(off) = 3.0 V 4091 4092 4093 4091 4092 4093 PN4091 / 4092 / 4093 / MMBF4091 / 4092 / 4093 N-Channel Switch 5 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST  FASTr™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ PowerTrench  QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER  SMART START™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G