QEE113

PLASTIC INFRARED LIGHT EMITTING DIODE QEE113 PACKAGE DIMENSIONS 0.175 (4.44) 0.087 (2.22) 0.050 (1.27) Ø0.065 (1.65) 0.200 (5.08) Ø0.095 (2.41) 0.500 (12.70) MIN CATHODE ANODE 0.020 (0.51) SQ. (2X) SCHEMATIC 0.100 (2.54) 0.030 (0.76) 0.100 (2.54) NOM ANODE CATHODE NOTES: 1. Dimensions for all drawings are in inches (mm). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified. DESCRIPTION The QEE113 is a 940 nm GaAs LED encapsulated in a medium wide angle, plastic sidelooker package. FEATURES • • • • • • • • λ= 940 nm Package Type = Sidelooker Chip Material = GaAs Matched Photosensor: QSE113 Medium Wide Emission Angle, 50° Package Material: Clear Epoxy High Output Power Gray stripe on the top side © 2002 Fairchild Semiconductor Corporation Page 1 of 4 4/30/02 PLASTIC INFRARED LIGHT EMITTING DIODE QEE113 ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) Parameter Symbol Rating Unit Operating Temperature TOPR -40 to +100 °C Storage Temperature TSTG -40 to +100 °C (Iron)(2,3,4) TSOL-I 240 for 5 sec °C Soldering Temperature (Flow)(2,3) TSOL-F 260 for 10 sec °C Continuous Forward Current IF 50 mA Reverse Voltage VR 5 V PD 100 mW Soldering Temperature Power Dissipation(1) NOTES: 1. Derate power dissipation linearly 1.33 mW/°C above 25°C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron 1/16" (1.6 mm) minimum from housing. ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) Parameter Test Conditions Symbol Min Typ Max Units Peak Emission Wavelength IF = 100 mA λPE — 940 — nm Emission Angle IF = 100 mA 2Θ1/2 — 50 — Deg. Forward Voltage IF = 100 mA, tp = 20 ms VF — — 1.5 V Reverse Current VR = 5 V IR — — 10 µA Radiant Intensity IF = 100 mA, tp = 20 ms IE 3 — 12 mW/sr tr — 1000 — ns tf — 1000 — ns Rise Time Fall Time © 2002 Fairchild Semiconductor Corporation IF = 100 mA Page 2 of 4 4/30/02 PLASTIC INFRARED LIGHT EMITTING DIODE QEE113 Fig.2 Coupling Characteristics of QEE113 And QSE113 IC (ON) - NORMALIZED COLLECTOR CURRENT (mA) Ie - NORMALIZED RADIANT INTENSITY Fig.1 Normalized Radiant Intensity vs. Forward Current 10 Normalized to: IF = 100 mA Pulsed tpw = 100 µs Duty Cycle = 0.1 % TA = 25˚C 1 0.1 0.01 0.001 1 10 100 1000 Normalized to: d=0 IF Pulsed tpw = 100 µs Duty Cycle = 0.1 % VCC = 5 V RL = 100 Ω TA = 25˚C 0.8 0.6 0.4 IF = 100 mA 0.2 0.0 IF = 20 mA 0 1 2 3 4 5 6 IF - FORWARD CURRENT (mA) LENS TIP SEPARATION (INCHES) Fig.3 Forward Voltage vs. Ambient Temperature Fig. 4 Normalized Intensity vs. Wavelength 1.0 2.0 IF = 100 mA 0.9 IF = 50 mA 0.8 NORMALIZED INTENSITY VF - FORWARD VOLTAGE (V) 1.0 1.5 1.0 IF = 20 mA IF = 10 mA 0.5 0.0 -40 Normalized to: IF Pulsed tpw = 100 µs Duty Cycle = 0.1 % -20 0 0.7 0.6 0.5 0.4 0.3 0.2 0.1 20 40 60 80 0.0 875 100 900 925 950 975 1000 1025 λ (nm) TA - AMBIENT TEMPERATURE (˚C) Fig. 5 Radiation Diagram 110 100 90 80 70 120 60 130 50 140 40 150 30 160 20 170 180 1.0 © 2002 Fairchild Semiconductor Corporation 10 0.8 0.6 0.4 0.2 0.0 0.2 Page 3 of 4 0.4 0.6 0.8 1.0 0 4/30/02 PLASTIC INFRARED LIGHT EMITTING DIODE QEE113 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. © 2002 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Page 4 of 4 4/30/02