QRD1113

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. QRD1113 / QRD1114 Reflective Object Sensor Features Description • • • • • The QRD1113 and QRD1114 reflective sensors consist of an infrared emitting diode and an NPN silicon phototransistor mounted side by side in a black plastic housing. The on-axis radiation of the emitter and the on-axis response of the detector are both perpendicular to the face of the QRD1113 and QRD1114. The phototransistor responds to radiation emitted from the diode only when a reflective object or surface is in the field of view of the detector. Phototransistor Output No-Contact Surface Sensing Unfocused for Sensing Diffused Surfaces Compact Package Daylight Filter on sensor Schematic 2 3 1 4 PIN 1. Collector PIN 3. Anode PIN 2. Emitter PIN 4. Cathode Ordering Information Part Number QRD1113 QRD1114 Operating Temperature -40 to +85°C © 2005 Fairchild Semiconductor Corporation QRD1113 / QRD1114 Rev. 1.3..0 Package Top Mark Packing Method Custom 4L QRD1113 Bulk Custom 4L QRD1114 Bulk www.fairchildsemi.com 1 QRD1113 / QRD1114 — Reflective Object Sensor June 2017 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise specified. Symbol Parameter Min. TOPR Operating Temperature TSTG Storage Temperature TSOL-I Lead Temperature (Solder Iron)(1,2,3) 240 for 5 s TSOL-F Lead Temperature (Solder Flow)(1,2) 260 for 10 s Unit -40 to +85 -40 to + 100 °C EMMITER IF Continuous Forward Current 50 mA VR Reverse Voltage 5 V PD Power Dissipation 100 mW VCEO Collector-Emitter Voltage 30 V VECO Emitter-Collector Voltage SEMSOR PD Power Dissipation V (4) 100 mW Notes: 1. RMA flux is recommended. 2. Methanol or isopropyl alcohols are recommended as cleaning agents. 3. Soldering iron tip 1/16 inch (1.6 mm) minimum from housing. 4. Derate power dissipation linearly 1.33 mW/°C. © 2005 Fairchild Semiconductor Corporation QRD1113 / QRD1114 Rev. 1.3.0 www.fairchildsemi.com 2 QRD1113 / QRD1114 — Reflective Object Sensor Absolute Maximum Ratings Values are at TA = 25°C unless specified otherwise. Symbol Parameter Test Conditions Min. Typ. Max. Units INPUT (Emitter) VF Forward Voltage IF = 20 mA 1.7 V IR Reverse Leakage Current VR = 5 V 100 Peak Emission Wavelength IF = 20 mA μA nm λPE 940 OUTPUT (Sensor) BVCEO Collector-Emitter Breakdown IC = 1 mA 30 BVECO Emitter-Collector Breakdown IE = 0.1 mA 5 Dark Current VCE = 10 V, IF = 0 mA IC(ON) QRD1113 Collector Current IC(ON) QRD1114 Collector Current IF = 20 mA, VCE = 5 V, D = 0.050 inch(5, 7) ID V V 100 nA COUPLED Collector Emitter Saturation Voltage IF = 40 mA, IC = 100 μA, D = 0.050 inch(5, 7) ICX Cross Talk IF = 20 mA, VCE =5 V, EE = 0(6) tr Rise Time tf Fall time VCE(SAT) VCE = 5 V, RL = 100 Ω, IC(ON) = 5 mA 0.300 mA 1 mA 0.2 0.4 V 10.0 μA 10 μs 50 μs Notes: 5. D is the distance from the sensor face to the reflective surface. 6. Crosstalk (ICK) is the collector current measured with the indicated current on the input diode and with no reflective surface. 7. Measured using Eastman Kodak natural white test card with 90% diffused reflecting as a reflecting surface. © 2005 Fairchild Semiconductor Corporation QRD1113 / QRD1114 Rev. 1.3.0 www.fairchildsemi.com 3 QRD1113 / QRD1114 — Reflective Object Sensor Electrical / Optical Characteristics QRD1113 / QRD1114 — Reflective Object Sensor Typical Performance Characteristics 0.80 Figure 1. Forward Voltage vs. Forward Current Figure 2. Normalized Collector Current vs. Forward Current Figure 3. Normalized Collector Current vs. Temperature Figure 4. Normalized Collector Dark Current vs. Temperature © 2005 Fairchild Semiconductor Corporation QRD1113 / QRD1114 Rev. 1.3.0 www.fairchildsemi.com 4 QRD1113 / QRD1114 — Reflective Object Sensor Typical Performance Characteristics (continued) Figure 5. Normalized Collector Current vs. Distance © 2005 Fairchild Semiconductor Corporation QRD1113 / QRD1114 Rev. 1.3.0 www.fairchildsemi.com 5 QRD1113 / QRD1114 — Reflective Object Sensor Physical Dimensions Custom 4L 0.083 (2.11) PIN 1 INDICATOR OPTICAL CENTERLINE 0.240 (6.10) 0.120 (3.05) 0.173 (4.39) 0.183 (4.65) 0.500 (12.7) MIN 0.020 (0.51) SQ. (4X) 3 2 0.100 (2.54) 4 1 0.083 (2.11) Notes: 1. Dimensions for all drawings are in inches (millimeters). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified. 3. Pins 2 and 4 typically .050" shorter than pins 1 and 3. 4. Dimensions controlled at housing surface. Figure 6. REFLECTIVE RECTANGULAR SENSOR PCB MOUNT (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/packing_dwg/PKG-ARU311A-LOCZ.pdf. © 2005 Fairchild Semiconductor Corporation QRD1113 / QRD1114 Rev. 1.3.0 www.fairchildsemi.com 6 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com