QTLP680C4TR

SURFACE MOUNT LED LAMP STANDARD BRIGHT REFLECTOR QTLP680C-2 HER QTLP680C-3 Yellow QTLP680C-7 AlGaAs Red QTLP680C-B Blue QTLP680C-4 Green PACKAGE DIMENSIONS 0.185 (4.70) 0.177 (4.50) 0.122 (3.10) 0.114 (2.90) 0.0197 (0.50) 0.091 (2.31) 0.083 (2.10) 0.0157 (0.40) 0.110 (2.8) 0.102 (2.6) TOP 0.043 (1.1) 0.035 (0.9) 0.063 (1.60) 0.055 (1.40) 0.008 (0.20) 0.004 (0.10) 0.014 (0.36) 0.010 (0.26) SIDE - + for -2, -3, -4 and -B for -7 POLARITY APPLICATIONS NOTE: • Backlighting Dimensions for all drawings are in inches (mm). • Status indication for consumer electronics and other equipment DESCRIPTION Designed with a reflective housing, these surface mount LEDs offer uniform lighting and high light output performance. FEATURES • Wide viewing angle of 130° • Water clear optics • Moisture-proof packaging • Available in 0.315” (8mm) width tape on 7” (178mm) diameter reel; 2,000 units per reel  2001 Fairchild Semiconductor Corporation DS300115 8/31/01 1 OF 6 www.fairchildsemi.com SURFACE MOUNT LED LAMP STANDARD BRIGHT REFLECTOR QTLP680C-2 HER QTLP680C-3 Yellow QTLP680C-7 AlGaAs Red QTLP680C-B Blue ABSOLUTE MAXIMUM RATINGS Parameter Continuous Forward Current Peak Forward Current (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage (IR = 10 µA) Power Dissipation Operating Temperature Storage Temperature Lead Soldering Time (TA =25°C Unless otherwise specified) Symbol IF -2 30 -3 30 IFM 160 160 VR PD TOPR TSTG TSOL 5 84 5 84 ELECTRICAL / OPTICAL CHARACTERISTICS Part Number Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Wavelength (nm) Peak Dominant Spectral Line Half Width (nm) Viewing Angle (°) www.fairchildsemi.com QTLP680C-4 Green QTLP680C -4 30 Units -7 30 -B 30 160 180 100 mA 5 84 -40 to +85 -40 to +100 260 for 5 sec 5 72 5 135 V mW °C °C °C mA (TA =25°C) -2 -3 QTLP680C -4 -7 -B IV 7 15 7 15 15 25 25 40 15 20 IF = 20mA VF 2.8 2.0 2.8 2.0 2.8 2.1 2.4 1.9 4.5 3.8 IF = 20mA 635 630 45 130 585 590 35 130 565 570 30 130 660 645 20 130 430 465 65 130 IF = 20mA Symbol DP DD D 201/2 2 OF 6 Condition IF = 20mA IF = 20mA 8/31/01 DS300115 SURFACE MOUNT LED LAMP STANDARD BRIGHT REFLECTOR QTLP680C-2 HER QTLP680C-3 Yellow QTLP680C-7 AlGaAs Red QTLP680C-B Blue QTLP680C-4 Green TYPICAL PERFORMANCE CURVES Fig. 2 Relative Luminous Intensity vs. DC Forward Current Fig. 1 Forward Current vs. Forward Voltage 2.0 90 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) IF - FORWARD CURRENT (mA) 80 70 HER 60 GREEN AlGaAs RED 50 YELLOW 40 30 BLUE 20 10 AlGaAs RED 1.5 1.0 BLUE HER YELLOW GREEN 0.5 0.0 0 1.0 2.0 2.5 3.0 4.0 5.0 0 5 10 15 20 25 30 IF - DC FORWARD CURRENT (mA) VF - FORWARD VOLTAGE (V) Fig. 3 Relative Intensity vs. Peak Wavelength HER BLUE GREEN YELLOW AlGaAs RED RELATIVE INTENSITY 1.0 0.5 0 300 350 400 450 500 550 600 650 700 750 WAVELENGTH (nm) Fig.5 Maximum Forward Current vs. Ambient Temperature IF - FORWARD CURRENT (mA) 50 Fig.4 Radiation Diagram -30˚ -20˚ -10˚ 0˚ 10˚ 20˚ 30˚ -40˚ 40˚ -50˚ 50˚ -60˚ 60˚ -70˚ 70˚ -80˚ -90˚ 1.0 8/31/01 30 20 10 80˚ 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 0 90˚ 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (˚C) REL. LUMINOUS INTENSITY (%) DS300115 40 3 OF 6 www.fairchildsemi.com SURFACE MOUNT LED LAMP STANDARD BRIGHT REFLECTOR QTLP680C-2 HER QTLP680C-3 Yellow QTLP680C-7 AlGaAs Red QTLP680C-B Blue QTLP680C-4 Green RECOMMENDED PRINTED CIRCUIT BOARD PATTERN 0.029 (0.74) 0.020 (0.5) 0.140 (3.55) 0.029 (0.74) 0.016 (0.4) RECOMMENDED IR REFLOW SOLDERING PROFILE 5 sec MAX soldering time 240° C MAX -5° C/s MAX +5° C/s MAX 60 - 120 sec Preheating 120 - 150° C MAX www.fairchildsemi.com 4 OF 6 8/31/01 DS300115 SURFACE MOUNT LED LAMP STANDARD BRIGHT REFLECTOR QTLP680C-2 HER QTLP680C-3 Yellow QTLP680C-7 AlGaAs Red QTLP680C-B Blue QTLP680C-4 Green TAPE AND REEL DIMENSIONS 13.2±1.5 2.5±0.5 Ø178.0±1.0 Ø60.2±0.5 2.5±0.5 16.0±0.2 Progressive direction 4.0±0.1 1.55±0.05 5.5±0.05 2.0±0.05 12.0±0.3 1.75±0.1 Ø13.0±0.5 4.85 0.3 4.0±0.1 2.44 1.98 for -7 for -2, -3, -4 and -B Polarity DS300115 8/31/01 Dimensional tolerance is ± 0.1mm unless otherwise specified Angle: ± 0.5 Unit: mm 5 OF 6 www.fairchildsemi.com SURFACE MOUNT LED LAMP STANDARD BRIGHT REFLECTOR QTLP680C-2 HER QTLP680C-3 Yellow QTLP680C-7 AlGaAs Red QTLP680C-B Blue QTLP680C-4 Green DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 6 OF 6 8/31/01 DS300115