RD2006FR-H

Ordering number : ENA1832A RD2006FR Planar Ultrafast Rectifier Fast trr type, 20A, 600V, 50ns, TO-220F-2FS http://onsemi.com Features • • • • VF=1.75V max (IF=20A) VRRM=600V trr=21ns (typ.) Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage VRRM Average Output Current Surge Forward Current IO IFSM Junction Temperature Tj Storage Temperature Tstg Conditions Ratings DC bias Sine wave, 10ms single pulse Unit 600 V 20 A 220 A 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7532-001 • Package : TO-220F-2FS • JEITA, JEDEC : SC-67 • Minimum Packing Quantity : 50pcs./magazine RD2006FR-H 4.7 10.16 3.18 Marking Electrical Connection 2 3.23 15.8 15.87 6.68 3.3 2.54 RD2006 FR LOT No. 1.28 1 12.98 0.8 MAX 1.47 MAX 0.8 1 2.76 * 2 0.5 part is not a metal * : This but a resin 5.08 1 : Cathode 2 : Anode TO-220F-2FS Semiconductor Components Industries, LLC, 2013 September, 2013 91912 TKIM/91510SA TKIM TC-00002488 No. A1832-1/6 RD2006FR Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR VF IR Forward Voltage Reverse Current Reverse Recovery Time Thermal Resistance Ratings Conditions min IR=1mA IF=20A typ Unit max 600 V 1.6 trr1 VR=600V IF=10A, di / dt=100A/μs trr2 Rth(j-c) IF=0.5A, IR=1A Between the junction part and the case smoothing current 1.75 V 100 μA 50 ns 21 ns 3.5 °C / W Ordering Information Device RD2006FR-H memo Pb Free and Halogen Free °C C 0° 2 =1 Ta 0 0.5 5 1.0 1.5 (2) (3) (4) 360° 25 Rectangular wave 20 θ 360° 15 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° (5)DC 10 5 0 5 0 10 15 20 25 Average Output Current, IO -- A Surge Forward Current, IFSM(Peak) -- A 20ms t 200 180 160 140 120 5 7 0.1 2 3 5 Time, t -- s 7 1.0 2 3 5 7 10 IT15949 100 IT15946 Tc max -- IO (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° (5)DC 125 100 75 (4) 50 0 (3) (2) 10 5 15 (5) 20 25 Average Output Current, IO -- A IT15948 IFSM -- Pulse Time 450 IS 3 10 1.0 150 25 30 Current waveform 50Hz sine wave 2 2 (1) 220 100 0.01 3 IT15947 IFSM -- t 240 5 (5) Case Temperature, Tc max -- °C 180° 7 175 35 30 100 Reverse Voltage, VR -- V Surge Forward Current, IFSM(Peak) -- A Average Forward Power Dissipation, PF(AV) -- W (1) 2 IT15945 PF(AV) -- IO Sine wave 3 10 0.1 2.0 Forward Voltage, VF -- V 40 f=100kHz 7 25°C Junction Capacitance, Cj -- pF 70 10 7 5 3 2 1.0 7 5 3 2 Cj -- VR 1000 --4 0° C Forward Current, IF -- A Shipping 50pcs./magazine IF -- VF 100 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 Package TO-220F-2FS IS 400 t 350 300 250 200 150 0 2 4 6 Time, t -- ms 8 10 12 IT15950 No. A1832-2/6 Transient Thermal Resistance, Rth(j-c) -- °C / W RD2006FR Rth(j-c) -- t 10 7 5 3 2 1.0 7 5 3 2 0.1 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 Time, t -- s 5 7 1.0 2 3 5 7 10 IT15951 No. A1832-3/6 RD2006FR Magazine Specification RD2006FR-H No. A1832-4/6 RD2006FR Outline Drawing RD2006FR-H Mass (g) Unit 1.8 mm * For reference No. A1832-5/6 RD2006FR ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A1832-6/6