RS1B

Fast Rectifiers RS1A - RS1M Features • • • • • Glass−Passivated Junction For Surface Mounted Applications Built−in Strain Relief, Ideal for Automated Placement UL Certified: Certificate # E326243 These Devices are Pb−Free and are RoHS Compliant www.onsemi.com SMA CASE 403AE MARKING DIAGRAM &Y&Z&3 RS1x &Y &Z &3 RS1x x = ON Semiconductor Logo = Assembly Plant Code = Date Code (Year & Week) = Specific Device Code = A/B/D/G/J/K/M ORDERING INFORMATION Part Number Marking Package Shipping† RS1A RS1A 7500 / Tape & Reel RS1B RS1B SMA (Pb−Free) RS1D RS1D RS1G RS1G RS1J RS1J RS1K RS1K RS1M RS1M †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2017 March, 2021 − Rev. 3 1 Publication Order Number: RS1M/D RS1A − RS1M SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Value Symbol Parameter RS1A RS1B RS1D RS1G RS1J RS1K RS1M Units 50 100 200 400 600 800 1000 V VRRM Maximum Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current at TA = 100°C 1.0 A IFSM Non−Repetitive Peak Forward Surge Current: 8.3 ms Single Half−Sine Wave 30 A Operating Junction Temperature −55 to +150 °C Storage Temperature Range −55 to +150 °C TJ TSTG Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Value Unit Power Dissipation 1.19 W RqJA Junction−to−Ambient Thermal Resistance (Note 1) 105 °C/W RqJL Junction−to−Lead Thermal Resistance (Note 1) 32 °C/W PD Parameter 1. Device mounted on FR−4 PCB 0.013 mm. ELECTRICAL CHARACTERISTICS (Values are at TA = 25°C unless otherwise noted) Symbol Parameter Test Conditions Value RS1A RS1B RS1D RS1G VF Forward Voltage IF = 1.0 A trr Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A IR Reverse Current at Rated VR TA = 25°C 5.0 TA = 125°C 50 VR = 4.0 V, f = 1.0 MHz 10 CT Total Capacitance RS1J RS1K RS1M 1.3 150 Unit V 250 500 ns mA pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 RS1A − RS1M TYPICAL PERFORMANCE CHARACTERISTICS 1.4 1.2 1 RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2 x 0.2" (5.0 x 5.0 mm) COPPER PAD AREAS 0.8 0.6 0.4 0.2 0 0 25 50 75 30 Peak Forward Surge Current, IFSM [A] Average Rectified Forward Current, IF [A] 1.6 100 125 150 25 20 15 10 5 0 175 1 2 Figure 1. Forward Current Derating Curve 10 20 50 100 Figure 2. Non−Repetitive Surge Current 10 10 Reverse Current, IR [mA] Forward Current, IF [A] 5 Number of Cycles at 60 Hz Ambient Temperature [°C] TA = 125°C 1 TA = 25°C 0.1 TA = 125°C 1 TA = 100°C 0.1 0.01 TA = 25°C Pulse Width = 300 ms 2% Duty Cycle 0.01 0.4 0.001 0.6 0.8 1 1.2 1.4 0 1.6 40 60 80 100 120 140 Forward Voltage, VF [V] Percent of Rated Peak Reverse Voltage [%] Figure 3. Forward Voltage Characteristics Figure 4. Reverse Current vs. Reverse Voltage 50 Total Capacitance, CT [pF] 20 20 10 5 1 1 2 5 10 20 50 100 Reverse Voltage, VR [V] Figure 5. Total Capacitance www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SMA CASE 403AE ISSUE O B B 5.60 4.80 0.13 M C B DATE 31 AUG 2016 A 2.65 2.95 2.50 1.65 1.20 B 1.75 4.30 B A 4.75 4.00 LAND PATTERN RECOMMENDATION TOP VIEW 2.50 MAX A 2.20 1.90 B C 0.203 0.050 2.05 1.95 NOTES: 0.30 0.05 0.13 M C SIDE VIEW 8° 0° B A A. EXCEPT WHERE NOTED, CONFORMS TO JEDEC DO214 VARIATION AC. B DOES NOT COMPLY JEDEC STANDARD VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSIONS AND TOLERANCE AS PER ASME Y14.5−2009. E. LAND PATTERN STD. DIOM5025X231M R0.15 4X GAGE PLANE 0.45 8° 0° 0.41 0.15 1.52 0.75 DETAIL A SCALE 20 : 1 DOCUMENT NUMBER: DESCRIPTION: 98AON13440G SMA Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative