Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
SS15FA - S115FA
1 A, 50 V - 150 V Surface Mount Schottky Barrier
Rectifiers
Features
•
•
•
•
•
•
•
2
Low Power Loss, High Efficiency
Guard Ring for Overvoltage Protection
High Surge Current Capability
UL Flammability 94V-0 Classification
MSL 1 per J-STD-020
RoHS Compliant / Green Molding Compound
Industrial Device Qualified per AEC-Q101 Standards
* See authorized use policy
1
SOD-123FA
1
Cathode
2
Anode
Ordering Information
Part Number
Top Mark
Package
Packing Method
SS15FA
15L
SOD-123FA
Tape and Reel
SS16FA
16L
SOD-123FA
Tape and Reel
SS19FA
19L
SOD-123FA
Tape and Reel
S110FA
10L
SOD-123FA
Tape and Reel
S115FA
1AL
SOD-123FA
Tape and Reel
© 2016 Fairchild Semiconductor Corporation
SS15FA - S115FA Rev. 1.1
www.fairchildsemi.com
SS15FA - S115FA — 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers
March 2016
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Value
Symbol
Parameter
SS15
FA
SS16
FA
SS19
FA
S110
FA
S115
FA
Unit
50
60
90
100
150
V
VRRM
Repetitive Peak Reverse Voltage
VRMS
RMS Reverse Voltage
35
42
63
70
105
V
DC Blocking Voltage
50
60
90
100
150
V
VR
IF(AV)
IFSM
TJ
TSTG
Average Forward Rectified Current
1
A
Peak Forward Surge Current: 8.3 ms Single Half
Sine-Wave Superimposed on Rated Load
30
A
Operating Junction Temperature Range
-55 to +150
C
Storage Temperature Range
-55 to +150
C
Thermal Characteristics(1)
Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
Value
Unit
JL
Thermal Characteristics, Junction-to-Lead
16
C/W
RJA
Thermal Resistance, Junction-to-Ambient
152
C/W
Note:
1. Per JESD51-3 Recommended Thermal Test Board. Device mounted on FR-4 PCB, board size = 76.2mm x
114.3mm.
Electrical Characteristics
Values are at TA = 25°C unless otherwise noted.
Value
Symbol
Parameter
Conditions SS15
SS16
FA
FA
VF
Maximum Instantaneous
Forward Voltage(2)
IR
Maximum Reverse Current
at Rated VR
SS19
FA
S110
FA
S115
FA
IF = 0.5 A
0.58
0.70
0.75
IF = 1.0 A
0.70
0.80
0.90
TJ = 25°C
0.4
TJ = 100°C
6.0
TJ = 125°C
Unit
V
0.05
mA
0.5
CJ
Typical Junction Capacitance
VR = 4 V,
f = 1 MHz
54
35
pF
Trr
Typical Reverse Recovery Time
IF = 0.5 A,
IR = 1 A,
IRR = 0.25 A
5.6
8.3
ns
Note:
2. Pulse test with PW = 300 μs, 1% duty cycle
© 2016 Fairchild Semiconductor Corporation
SS15FA - S115FA Rev. 1.1
www.fairchildsemi.com
2
SS15FA - S115FA — 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers
Absolute Maximum Ratings
SS15FA - S115FA
PEAK FORWARD SURGE CURRENT (A)
AVERAGE FORWARD CURRENT (A)
8.3ms Single Half
Sine-Wave
LEAD TEMPERATURE (oC)
Figure 2. Maximum Non-Repetitive
Forward Surge Curren
Figure 1. Forward Current Derating Curve
1
1
SS19FA - S110FA
o
Forward Current, IF [A]
Forward Current, IF [A]
SS15FA - SS16FA
o
TA= 150 C
TA= -55 C
o
TA= -40 C
o
0.1
TA= 125 C
o
TA= 150 C
0.1
0.2
o
o
TA= -40 C
o
TA= 25 C
0.3
0.4
0.5
0.6
0.7
0.01
0.0
0.8
0.1
0.2
Forward Voltage, VF [V]
0.4
0.5
0.6
0.7
0.8
Figure 4. Typical Forward Characteristics
1
10000
S115FA
1000
Reverse Current, IR [μA]
Forward Current, IF [A]
0.3
Forward Voltage, VF [V]
Figure 3. Typical Forward Characteristics
o
TA= 150 C
0.1
o
TA= -55 C
o
TA= 125 C
o
TA= -40 C
o
TA= 25 C
0.01
0.0
o
TA= -55 C
TA= 125 C
0.1
o
TA= 25 C
0.01
0.0
NUMBER OF CYCLES AT 60 Hz
0.1
0.2
0.3
0.4
10
o
TA=150 C
o
o
TA= 125 C
TA= 75 C
1
0.1
o
TA= 25 C
o
TA= -55 C
0.01
o
0.001
TA= -40 C
1E-4
SS15FA-SS16FA
0.5
0.6
0.7
1E-5
10
0.8
Forward Voltage, VF [V]
20
30
40
50
60
70
80
90
100
Percent of Rated Peak Reverse Voltage [%]
Figure 5. Typical Forward Characteristics
© 2016 Fairchild Semiconductor Corporation
SS15FA - S115FA Rev. 1.1
100
Figure 6. Typical Reverse Characteristics
www.fairchildsemi.com
3
SS15FA - S115FA — 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers
Typical Performance Characteristics
10000
1000
o
Reverse Current, IR [μA]
Junction Capacitance, CJ [pF]
TA=150 C
1000
100
o
TA= 125 C
10
1
o
0.1
TA= 75 C
o
TA= 25 C
0.01
o
TA= -55 C
o
TA= -40 C
0.001
1E-4
100
10
SS15FA-SS16FA
SS19FA-S115FA
SS19FA-S115FA
1E-5
20
30
40
50
60
70
80
90
1
0.1
100
Percent of Rated Peak Reverse Voltage [%]
100
Figure 8. Typical Junction Capacitance
Figure 7. Typical Reverse Characteristics
© 2016 Fairchild Semiconductor Corporation
SS15FA - S115FA Rev. 1.1
1
10
Reverse Voltage, VR [V]
www.fairchildsemi.com
4
SS15FA - S115FA — 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers
Typical Performance Characteristics (Continued)
2.90
2.70
1.90
1.70
4.30
1.40
1.90
1.20
TOP VIEW
1.40
1.20
LAND PATTERN RECOMMENDATION
1.43
1.23
3.80
3.40
0.30
0.16
FRONT VIEW
0.85
0.35
2.60
2.45
1.20
0.80
BOTTOM VIEW
NOTES:
A. NO INDUSTRY STANDARD APPLIES TO THIS
PACKAGE.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
D. DRAWING FILE NAME: MKT-MA02Drev3
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com