S215FA

Schottky Barrier Rectifiers, Surface Mount, 2 A, 20 V - 150 V SS22FA - S215FA Features • • • • • • • • www.onsemi.com Low Power Loss, High Efficiency Guard Ring for Overvoltage Protection High Surge Current Capability UL Flammability 94V−0 Classification MSL 1 per J−STD−020 Green Molding Compound NRVB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free and are RoHS Compliant 1 Cathode 2 Anode Rectifier 2 1 SOD−123FL CASE 425AB MARKING DIAGRAM &Y &Z**&G Band Indicates Cathode &Y &Z ** &G = Binary Calendar Year Coding Scheme = Assembly Plant Code = Specific Device Code (see “Top Mark” in the table below) = Single Digit Weekly Date Code ORDERING INFORMATION Part Number Top Mark Package Shipping† SS22FA 22L SOD−123FL (Pb−Free) 3000 / Tape & Reel 23L SOD−123FL (Pb−Free) 3000 / Tape & Reel 25L SOD−123FL (Pb−Free) 3000 / Tape & Reel 29L SOD−123FL (Pb−Free) 3000 / Tape & Reel 20L SOD−123FL (Pb−Free) 3000 / Tape & Reel 2AL SOD−123FL (Pb−Free) 3000 / Tape & Reel NRVBSS22FA SS23FA NRVBSS23FA SS25FA NRVBSS25FA SS29FA NRVBSS29FA S210FA NRVBS210FA S215FA NRVBS215FA †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2020 May, 2020 − Rev. 1 1 Publication Order Number: SS29FA/D SS22FA − S215FA SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Value Symbol Parameter SS22FA SS23FA SS25FA SS29FA S210FA S215FA Unit VRRM Repetitive Peak Reverse Voltage 20 30 50 90 100 150 V VRMS RMS Reverse Voltage 14 21 35 63 70 105 V DC Blocking Voltage 20 30 50 90 100 150 V VR IF(AV) Average Forward Rectified Current 2 A IFSM Peak Forward Surge Current: 8.3 ms Single Half Sine−Wave Superimposed on Rated Load 50 A TJ TSTG Operating Junction Temperature Range −55 to +125 Storage Temperature Range °C −55 to +150 °C −55 to +150 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Note 1) Symbol Characteristic Value Unit ΨJL Junction−to−Lead Thermal Characteristics 16 °C/W RqJA Junction−to−Ambient Thermal Resistance 152 °C/W 1. Per JESD51−3 Recommended Thermal Test Board. Device mounted on FR−4 PCB, board size = 76.2 mm x 114.3 mm. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Value Symbol Parameter Conditions VF Maximum Instantaneous Forward Voltage (Note 2) IF = 2 A IR Maximum Reverse Current at Rated VR SS22FA SS23FA 0.50 TJ = 25°C SS25FA 0.70 SS29FA S210FA 0.85 0.4 TJ = 100°C Typical Junction Capacitance Trr Typical Reverse Recovery Time Unit 0.95 V mA 0.1 15 10 VR = 4 V, f = 1 MHz 120 93 62 48 pF IF = 0.5 A, IR = 1 A, IRR = 0.25 A 10 9 7 13 ns TJ = 125°C CJ S215FA 5 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse test with PW = 300 ms, 1% duty cycle. www.onsemi.com 2 SS22FA − S215FA PEAK FORWARD SURGE CURRENT (A) AVERAGE FORWARD CURRENT (A) TYPICAL PERFORMANCE CHARACTERISTICS 2.5 2 SS25FA - S215FA SS22FA − SS23FA 1.5 1 0.5 RESISTIVE OR INDUCTIVE LOAD 0 60 50 70 80 90 100 110 120 130 140 150 160 170 LEAD TEMPERATURE (°C) 50 30 20 10 0 1 IF − FORWARD CURRENT (A) IF − FORWARD CURRENT (A) o TA= 150 C o TA= 125 C 0.1 o TA= −55 C 0.01 0.0 0.1 0.2 o TA= −40 C 0.3 0.4 0.5 0.6 0.7 SS25FA 1 o TA= 150 C o TA= 125 C 0.1 o TA= −55 C o TA= 25 C 0.01 0.0 0.8 0.1 VF − FORWARD VOLTAGE (V) IF − FORWARD CURRENT (A) IF − FORWARD CURRENT (A) 0.3 0.4 0.5 0.6 0.7 0.8 Figure 4. Typical Forward Characteristics S210FA o TA= 150 C o TA= 125 C 0.1 o TA= −55 C o S215FA 1 o TA= 150 C o TA= 125 C 0.1 o TA= −55 C o TA= 25 C TA= −40 C o 0.2 o TA= −40 C VF − FORWARD VOLTAGE (V) Figure 3. Typical Forward Characteristics 1 100 Figure 2. Maximum Non−Repetitive Forward Surge Current SS22FA−SS23FA o TA= 25 C 10 NUMBER OF CYCLES AT 60 Hz Figure 1. Forward Current Derating Curve 1 8.3ms Single Half Sine−Wave 40 o TA= −40 C TA= 25 C 0.01 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.01 0.0 0.8 VF − FORWARD VOLTAGE (V) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 VF − FORWARD VOLTAGE (V) Figure 5. Typical Forward Characteristics Figure 6. Typical Forward Characteristics www.onsemi.com 3 SS22FA − S215FA TYPICAL PERFORMANCE CHARACTERISTICS (continued) 10000 100000 1000 1000 o TA= 125 C 100 10 Reverse Current, IR [mA] Reverse Current, IR [mA] 10000 o o TA=150 C TA= 75 C 1 o TA= 25 C 0.1 o TA= −40 C 0.01 0.001 1E−4 1E−5 20 o 30 40 50 60 70 80 10 o TA= 75 C 1 o 0.1 TA= 25 C 0.01 o TA= −40 C 0.001 1E−4 SS22FA−SS23FA TA= −55 C 90 1E−5 20 100 o TA=150 C o TA= 125 C 100 o SS25FA TA= −55 C 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage [%] Percent of Rated Peak Reverse Voltage [%] Figure 7. Typical Reverse Characteristics Figure 8. Typical Reverse Characteristics 10000 10000 1000 1000 100 Reverse Current, IR [mA] Reverse Current, IR [mA] o o TA=150 C o TA= 125 C 10 1 o o TA= 25 C TA= 75 C 0.1 0.01 o TA= −55 C o TA= −40 C 0.001 TA=150 C o TA= 125 C 100 10 1 0.1 o 0.01 0.001 o o 1E−4 1E−5 20 1E−4 S210FA 30 40 50 60 70 80 90 1E−5 20 100 TA= −55 C TA= −40 C S215FA 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage [%] Percent of Rated Peak Reverse Voltage [%] Figure 9. Typical Reverse Characteristics Figure 10. Typical Reverse Characteristics 1000 Junction Capacitance, CJ [pF] TA= 25 C o TA= 75 C SS22FA−SS23FA 100 SS25FA S210FA S215FA 10 1 0.1 1 10 100 Reverse Voltage, VR [V] Figure 11. Typical Junction Capacitance www.onsemi.com 4 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOD−123FA CASE 425AB ISSUE A DOCUMENT NUMBER: DESCRIPTION: 98AON13722G SOD−123FA DATE 11 AUG 2022 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative