S2SA1774G

2SA1774G, S2SA1774G PNP Silicon General Purpose Amplifier Transistor This PNP transistor is designed for general purpose amplifier applications. This device is housed in the SC−75/SOT−416/SC−90 package which is designed for low power surface mount applications, where board space is at a premium. www.onsemi.com Features • • • • • • Reduces Board Space High hFE, 210−460 (typical) Low VCE(sat), < 0.5 V Available in 8 mm, 7−inch/3000 Unit Tape and Reel S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant* SC−75 CASE 463 STYLE 1 COLLECTOR 3 MAXIMUM RATINGS (TA = 25°C) Rating Symbol Value Unit Collector − Emitter Voltage V(BR)CBO −60 Vdc Collector − Base Voltage V(BR)CEO −50 Vdc Emitter − Base Voltage V(BR)EBO −6.0 Vdc IC −100 mAdc Symbol Max Unit Power Dissipation (Note 1) PD 150 mW Junction Temperature TJ 150 °C Collector Current − Continuous 1 BASE MARKING DIAGRAM F9 M G G THERMAL CHARACTERISTICS Characteristic Storage Temperature Range Tstg −55 ~ + 150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Device mounted on a FR−4 glass epoxy printed circuit board using the minimum recommended footprint. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2012 February, 2019 − Rev. 10 1 2 EMITTER 1 F9 M G = Device Code = Date Code* = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION Device Package Shipping† 2SA1774G SC−75 (Pb−Free) 3,000/Tape & Reel S2SA1774G SC−75 (Pb−Free) 3,000/Tape & Reel 2SA1774T1G SC−75 (Pb−Free) 3,000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: 2SA1774/D 2SA1774G, S2SA1774G ELECTRICAL CHARACTERISTICS (TA = 25°C) Characteristic Symbol Collector−Base Breakdown Voltage (IC = −50 mAdc, IE = 0) V(BR)CBO Collector−Emitter Breakdown Voltage (IC = −1.0 mAdc, IB = 0) V(BR)CEO Emitter−Base Breakdown Voltage (IE = −50 mAdc, IE = 0) V(BR)EBO Collector−Base Cutoff Current (VCB = −30 Vdc, IE = 0) ICBO Emitter−Base Cutoff Current (VEB = −5.0 Vdc, IB = 0) IEBO Collector−Emitter Saturation Voltage (Note 2) (IC = −50 mAdc, IB = −5.0 mAdc) VCE(sat) DC Current Gain (Note 2) (VCE = −6.0 Vdc, IC = −1.0 mAdc) hFE Transition Frequency (VCE = −12 Vdc, IC = −2.0 mAdc, f = 30 MHz) fT Output Capacitance (VCB = −12 Vdc, IE = 0 Adc, f = 1 MHz) COB 2. Pulse Test: Pulse Width ≤ 300 ms, D.C. ≤ 2%. www.onsemi.com 2 Min Typ Max −60 − − −50 − − −6.0 − − − − −0.5 − − −0.5 − − −0.5 120 − 560 − 140 − − 3.5 − Unit V V V mA mA V − MHz pF 2SA1774G, S2SA1774G TYPICAL ELECTRICAL CHARACTERISTICS 1.2 IC/IB = 10 TA = 150°C TA = −55°C 0.01 0.1 1.0 10 TA = −55°C 0.8 TA = 25°C 0.7 0.6 TA = 150°C 0.5 0.4 0.3 100 0.2 0.1 1000 1.0 10 100 1000 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 2. Base−Emitter Saturation Voltage vs. Collector Current VCE = 6 V TA = 150°C TA = 25°C TA = −55°C 100 1 0.9 0.8 0.7 1.0 10 100 1000 TA = 25°C IC = 100 mA 1.8 1.6 IC = 50 mA 1.4 1.2 IC = 30 mA 1.0 0.8 IC = 10 mA 0.6 0.4 0.2 0 0.01 0.1 1.0 10 IC, COLLECTOR CURRENT (mA) IB, BASE CURRENT (mA) Figure 3. DC Current Gain vs. Collector Current Figure 4. Saturation Region 100 100 VCE = 2 V TA = −55°C TA = 25°C 0.6 0.5 0.4 2.0 C, CAPACITANCE (pF) 10 0.1 VBE(ON), BASE−EMITTER ON VOLTAGE (V) 1 0.9 Figure 1. Collector−Emitter Saturation Voltage vs. Collector Current 1000 hFE, DC CURRENT GAIN VBE(sat), BASE−EMITTER SATURATION VOLTAGE (V) TA = 25°C 0.1 IC/IB = 10 1.1 VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE (V) VCE, COLLECTOR−EMITTER SATURATION VOLTAGE (V) 1 TA = 150°C Cibo 10 Cobo 0.3 0.2 0.1 1.0 10 100 1000 1 0.1 1.0 10 IC, COLLECTOR CURRENT (mA) VR, REVERSE VOLTAGE (V) Figure 5. Base−Emitter Turn−ON Voltage vs. Collector Current Figure 6. Capacitance www.onsemi.com 3 100 2SA1774G, S2SA1774G TYPICAL ELECTRICAL CHARACTERISTICS 1000 VCE = −2 V TA = 25°C IC, COLLECTOR CURRENT (mA) ftau, CURRENT GAIN BANDWIDTH PRODUCT (MHz) 1000 100 10 0.1 1.0 10 100 IC, COLLECTOR CURRENT (mA) 1000 100 ms 100 Thermal Limit 1 ms 10 ms 10 1 1.0 Figure 7. Current Gain Bandwidth Product vs. Collector Current Single Pulse Test at TA = 25°C 10 VCE, COLLECTOR EMITTER VOLTAGE (V) Figure 8. Safe Operating Area www.onsemi.com 4 100 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SC−75/SOT−416 CASE 463−01 ISSUE G 3 1 2 DATE 07 AUG 2015 SCALE 4:1 −E− NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 2 3 b 3 PL 0.20 (0.008) e DIM A A1 b C D E e L HE −D− 1 M D HE C 0.20 (0.008) E A L MILLIMETERS MIN NOM MAX 0.70 0.80 0.90 0.00 0.05 0.10 0.15 0.20 0.30 0.10 0.15 0.25 1.55 1.60 1.65 0.70 0.80 0.90 1.00 BSC 0.10 0.15 0.20 1.50 1.60 1.70 INCHES NOM MAX 0.031 0.035 0.002 0.004 0.008 0.012 0.006 0.010 0.063 0.065 0.031 0.035 0.04 BSC 0.004 0.006 0.008 0.060 0.063 0.067 MIN 0.027 0.000 0.006 0.004 0.061 0.027 GENERIC MARKING DIAGRAM* A1 STYLE 1: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 2: PIN 1. ANODE 2. N/C 3. CATHODE STYLE 4: PIN 1. CATHODE 2. CATHODE 3. ANODE STYLE 5: PIN 1. GATE 2. SOURCE 3. DRAIN XX M G STYLE 3: PIN 1. ANODE 2. ANODE 3. CATHODE 1 XX = Specific Device Code M = Date Code G = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. SOLDERING FOOTPRINT* 0.356 0.014 1.803 0.071 0.508 0.020 0.787 0.031 1.000 0.039 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: DESCRIPTION: 98ASB15184C SC−75/SOT−416 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative