SS34FA-S310FA
Schottky Barrier Rectifiers,
Surface Mount, 3 A,
40 V-100 V
Features
•
•
•
•
•
•
•
www.onsemi.com
Low Power Loss, High Efficiency
Guard Ring for Overvoltage Protection
High Surge Current Capability
UL Flammability 94V−0 Classification
MSL 1 per J−STD−020
NRVB Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
This Device is Pb−Free and RoHS Compliant
2
1
SOD−123FL
CASE 425AB
ABSOLUTE MAXIMUM RATINGS
1
Cathode
(Values are at TA = 25°C unless otherwise noted)
Parameter
Symbol
SS34FA SS36FA S310FA
Unit
VRRM
Repetitive Peak Reverse
Voltage
40
60
100
V
VRMS
RMS Reverse Voltage
28
42
70
V
DC Blocking Voltage
40
60
100
V
VR
MARKING DIAGRAM
IF(AV)
Average Forward Rectified
Current
3
A
IFSM
Peak Forward Surge
Current: 8.3 ms Single Half
Sine−Wave Superimposed
on Rated Load
80
A
TJ
TSTG
Operating Junction
Temperature Range
Storage Temperature Range
2
Anode
−55 to
+125
−55 to +150
−55 to +150
1
°C
&Y
&Z
*
°C
&G
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
&Y
&Z*&G
= Binary Calendar Year Coding Scheme
= Assembly Plant Code
= Specific Device Code
(34L, 36L or 30L)
= Single Digit Weekly Datecode
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
THERMAL CHARACTERISTICS
(Values are at TA = 25°C unless otherwise noted) (Note 1)
Symbol
Parameter
Value
Unit
yJL
Thermal Characteristics, Junction−to−Lead
16
°C/W
RqJA
Thermal Resistance, Junction−to−Ambient
152
°C/W
1. Per JESD51−3 Recommended Thermal Test Board. Device mounted on
FR−4 PCB, board size = 76.2 mm × 114.3 mm.
© Semiconductor Components Industries, LLC, 2016
July, 2019 − Rev. 2
1
Publication Order Number:
SS36FA/D
SS34FA−S310FA
ELECTRICAL CHARACTERISTICS (Values are at TA = 25°C unless otherwise noted)
Parameter
Symbol
Conditions
SS34FA
SS36FA
S310FA
Unit
0.50
0.75
0.85
V
0.1
mA
VF
Maximum Instantaneous Forward
Voltage (Note 2)
IF = 3 A
IR
Maximum Reverse Current at
Rated VR
TJ = 25°C
TJ = 125°C
60
10
5
CJ
Typical Junction Capacitance
VR = 4 V, f = 1 MHz
152
117
78
pF
Trr
Typical Reverse Recovery Time
IF = 0.5 A, IR = 1 A, IRR = 0.25 A
12
11
8
ns
0.5
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse test with PW = 300 ms, 1% duty cycle.
ORDERING INFORMATION
Part Number
Top Mark
Package
Shipping†
SS34FA, NRVBSS34FA*
34L
SOD−123FL
(Pb−Free)
3,000 / Tape & Reel
SS36FA, NRVBSS36FA*
36L
SOD−123FL
(Pb−Free)
3,000 / Tape & Reel
S310FA, NRVBS310FA*
30L
SOD−123FL
(Pb−Free)
3,000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NRVB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable
www.onsemi.com
2
SS34FA−S310FA
4
PEAK FORWARD SURGE CURRENT
(A)
AVERAGE FORWARD CURRENT (A)
TYPICAL PERFORMANCE CHARACTERISTICS
SS36FA − S310FA
3
2
SS34FA
1
RESISTIVE OR
INDUCTIVE LOAD
0
0
25
50
75
100
125
150
100
8.3ms Single Half Sine−Wave
80
60
40
20
0
0
10
CASE TEMPERATURE (oC)
Figure 1. Forward Current Derating Curve
Figure 2. Maximum Non−Repetitive
Forward Surge Current
SS36FA
o
TA= 150 C
o
TA= 125 C
0.1
o
TA= −55 C
0.1
0.2
o
TA= 150 C
o
TA= 125 C
o
TA= −55 C
0.1
o
TA= 25 C
o
o
TA= 25 C
0.01
0.0
1
Forward Current, I F [A]
Forward Current, I F [A]
SS34FA
1
100
NUMBER OF CYCLES AT 60 Hz
TA= −40 C
0.4
0.3
0.5
0.6
0.7
0.01
0.0
0.8
0.1
0.2
Forward Voltage, V F [V]
o
TA= −40 C
0.3
0.4
0.5
0.6
0.7
0.8
Forward Voltage, VF [V]
Figure 3. Typical Forward Characteristics
Figure 4. Typical Forward Characteristics
100000
10000
1
Reverse Current, I R [μA]
Forward Current, I F [A]
S310FA
o
TA= 150 C
o
0.1
TA= 125 C
o
TA= −55 C
o
TA= −40 C
o
TA= 25 C
0.01
0.0
0.1
0.2
0.3
0.4
Forward Voltage, V
0.5
F
[V]
0.6
1000
100
10
1
o
o
TA= −40 C
0.001
1E−4
0.7
1E−5
10
0.8
o
TA=150 C
TA= 25 C
0.1
0.01
o
TA= 125 C
o
TA= 75 C
SS34FA
o
TA= −55 C
20
30
40
50
60
70
80
90
100
Percent of Rated Peak Reverse Voltage [%]
Figure 5. Typical Forward Characteristics
Figure 6. Typical Reverse Characteristics
www.onsemi.com
3
SS34FA−S310FA
10000
10000
1000
1000
100
o
o
TA= 125 C
o
TA= 75 C
10
Reverse Current, I R [μA]
Reverse Current, I R [μA]
TYPICAL CHARACTERISTICS (Continued)
TA=150 C
1
0.1
o
TA= 25 C
0.01
o
TA= −40 C
0.001
1E−4
1E−5
10
o
20
30
40
50
60
70
80
90
100
Junction Capacitance, CJ [pF]
o
TA= 75 C
0.1
0.01
0.001
o
TA= 25 C
o
TA= −40 C
o
TA= −55 C
20
30
40
50
60
70
S310FA
80
90
100
Figure 8. Typical Reverse Characteristics
1000
SS34FA
SS36FA
S310FA
10
1
10
Reverse Voltage, V R [V]
1
Percent of Rated Peak Reverse Voltage [%]
Figure 7. Typical Reverse Characteristics
1
0.1
o
TA= 125 C
10
1E−5
10
Percent of Rated Peak Reverse Voltage [%]
100
100
1E−4
SS36FA
TA= −55 C
o
TA=150 C
100
Figure 9. Typical Junction Capacitance
www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOD−123FL
CASE 425AB
ISSUE O
DATE 31 AUG 2016
2.90
2.70
1.90
1.70
4.30
1.40
1.90
1.20
TOP VIEW
1.40
1.20
LAND PATTERN RECOMMENDATION
1.43
1.23
3.80
3.40
0.30
0.16
FRONT VIEW
0.85
0.35
2.60
2.45
NOTES:
A. NO INDUSTRY STANDARD APPLIES TO THIS
PACKAGE.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
1.20
0.80
BOTTOM VIEW
DOCUMENT NUMBER:
DESCRIPTION:
98AON13722G
SOD−123FL
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
www.onsemi.com
1
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative