General-Purpose Rectifiers
S3A-S3N
Features
•
•
•
•
•
Low−Profile Package
Glass−Passivated Junction
UL Flammability Classification: 94V−0
UL Certified, UL #E258596
These are Pb−Free Devices
www.onsemi.com
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Value
S3A
S3B
S3D
S3G
S3J
S3K
Maximum
Repetitive
Reverse Voltage
50
100
200
400
600
800 1000 1200
VRMS
RMS
Reverse Voltage
35
70
140
280
420
560
840
V
VR
DC
Blocking Voltage
50
100
200
400
600
800 1000 1200
V
IF(AV)
Average Rectified
Forward Current
TL = 105°C
3.0
A
IFSM
Non-Repetitive
Peak Forward
Surge Current
8.3 ms Single
Half-Sine-Wave
100
A
TSTG
Storage
Temperature
Range
−55 to +150
°C
TJ
Operating
Junction
Temperature
Range
−55 to +150
°C
Symbol
VRRM
Parameter
S3M
S3N
Cathode
(2)
Unit
V
Anode
(1)
700
Anode
(1)
Cathode
(2)
MARKING DIAGRAM
$Y&Z&3
S3X
$Y
&Z
&3
S3X
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (Note 1)
Parameter
Symbol
PD
SMC
CASE 403AG
Power Dissipation
= ON Semiconductor Logo
= Assembly Plant Code
= Numeric Date Code
= Specific Device Code
X = A−N
Value
Unit
2.6
W
ORDERING INFORMATION
See detailed ordering and shipping information on page 3 of
this data sheet.
RqJA
Thermal Resistance, Junction-to-Ambient
100
°C/W
RqJL
Thermal Resistance, Junction-to-Lead
13
°C/W
1. Device is mounted on FR−4 PCB 0.013 mm. Land pattern size: refer to the
package drawing. Trace size: force line = 50 mil & sense line = 4 mil.
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted (per leg))
Value
Symbol
Parameter
S3A
Conditions
VF
Maximum Forward Voltage
trr
Typical Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
IR
Maximum Reverse Current at
Rated VR
Typical Total Capacitance
CT
IF = 3.0 A
S3B
S3D
S3G
S3J
S3K
S3M
S3N
Unit
1.2
V
2.5
ms
TA = 25_C
5
mA
TA = 125_C
250
VR = 4.0 V, f = 1.0 MHz
60
pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
© Semiconductor Components Industries, LLC, 2001
February, 2020 − Rev. 6
1
Publication Order Number:
S3N/D
S3A−S3N
4.0
100
3.5
Forward Current, IF [A]
Average Rectified Forward Current,
IF [A]
TYPICAL PERFORMANCE CHARACTERISTICS
3.0
2.5
2.0
1.5
1.0
0.5
0.0
50
60
70
80
90
10
1
0.1
0.01
100 110 120 130 140 150
TJ = 25°C
Pulse Width = 300 ms
2% Duty Cycle
0.6
0.7
Lead Temperature [5C]
Figure 1. Forward Current Derating Curve
100
Reverse Current, IR [mA]
Peak Forward Surge Current,
IFSM [A]
1.0
1.1
1.2
1.3
100
8.3 ms Single Half
Sine-Wave JEDEC
Method
80
60
40
20
0
1
2
5
10
20
50
TA = 125°C
10
1
TA = 25°C
0.1
100
Number of Cycles at 60 Hz
50
10
5
10
20
40
60
80
100
120
140
Figure 4. Reverse Current vs. Reverse Voltage
100
1
0
% of Reverse Voltage, VR [V]
Figure 3. Non-Repetitive Surge Current
Total Capacitance, CT [pF]
0.9
Figure 2. Forward Voltage Characteristics
120
5
0.8
Forward Voltage, VF [V]
50
100
Reverse Voltage, VR [V]
Figure 5. Total Capacitance
www.onsemi.com
2
S3A−S3N
ORDERING INFORMATION
Part Number
Top Marking
Package
Shipping†
S3A
S3A
3000 / Tape & Reel
S3B
S3B
DO−214AB (SMC)
(Pb−Free)
S3D
S3D
S3G
S3G
S3J
S3J
S3K
S3K
S3M
S3M
S3N
S3N
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SMC
CASE 403AG
ISSUE O
DATE 31 AUG 2016
8.15
7.75
B
1.96
6.25
5.55
3.27
2.75
3.39
B
6.81
0.13 M
7.15
6.60
A
C
B
TOP VIEW
2.45
1.90
A
0.203
0.050
0.13 M
C
B
B
A
A.
EXCEPT WHERE NOTED, CONFORMS TO
JEDEC DO−214, VARIATION AB
B
C.
D.
DOES NOT COMPLY TO JEDEC STD. VALUE
ALL DIMENSIONS ARE IN MILLIMETERS
DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR PROTRUSIONS.
DIMENSIONS AND TOLERANCING AS PER
ASME Y14.5−2009
LAND PATTERN STANDARD: DIOM7957X241M
DOCUMENT NUMBER:
DESCRIPTION:
0.45
1.60
0.75
8°
0°
DETAIL A
SCALE 2:1
NOTES:
F.
0.41
0.15
SEATING
PLANE
SIDE VIEW
E.
8°
0°
GAGE
PLANE
C
4.70
4.40
LAND PATTERN RECOMMENDATION
R0.15
4X
2.65 MAX
0.30
0.05
A
98AON13442G
SMC
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
www.onsemi.com
1
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative