Ordering number : ENA0406A
SB01-05C
Schottky Barrier Diode
50V, 0.1A, Low IR, Single CP
http://onsemi.com
Applications
• High frequency rectification (switching regulators, converters, choppers)
Features
• Fast reverse recovery time (trr max=10ns)
• Low forward voltage (VF max=0.55V)
• Low switching noise
• Low leakage current and high reliability due to highly reliable planar structure
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Conditions
Ratings
Unit
Repetitive Peak Reverse Voltage
VRRM
50
Nonrepetitive Peak Reverse Surge Voltage
VRSM
55
V
V
Average Output Current
IO
100
mA
Surge Forward Current
IFSM
2
A
Junction Temperature
Tj
--55 to +125
°C
Storage Temperature
Tstg
--55 to +125
°C
50Hz sine wave, 1 cycle
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
Package Dimensions
Product & Package Information
unit : mm (typ)
7013A-004
• Package
: CP
• JEITA, JEDEC
: SC-59, TO-236, SOT-23, TO-236AB
• Minimum Packing Quantity : 3,000 pcs./reel
Packing Type: TB Marking
1.5
0.3
1.1
SB01-05C-TB-E
1
0.95
2
TB
0.4
1 : Anode
2 : No Contact
3 : Cathode
A
LOT No.
0.05
0.1
3
LOT No.
0.5
2.5
0.5
2.9
Electrical Connection
3
CP
1
2
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of this data sheet.
Semiconductor Components Industries, LLC, 2014
June, 2014
60414HK TC-00003118/42506MSIM SB No.A0406-1/4
SB01-05C
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Reverse Voltage
Conditions
Forward Voltage
VR
VF
IR=50mA,Tj=25°C
IF=100mA,Tj=25°C
Reverse Current
IR
VR=25V,Tj=25°C
Interterminal Capacitance
C
Reverse Recovery Time
trr
VR=10V, f=1MHz
IF=IR=10mA, See specified Test Circuit.
max
15
on glass epoxy board
Unit
V
0.55
Mounted in Cu-foiled area of 16mm2×0.2mm
Rthj-a(2)
typ
50
Rthj-a(1)
Thermal Resistance
Ratings
min
4.4
V
mA
pF
10
ns
560
°C / W
410
°C / W
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
trr Test Circuit
10Ω
10mA
100Ω
10mA
50Ω
1.0mA
Duty≤10%
10ms
-5V
trr
Ordering Information
Device
SB01-05C-TB-E
Package
Shipping
memo
CP
3,000pcs./reel
Pb Free
No.A0406-2/4
SB01-05C
IF -- VF
5
3
2
100
5
100°C
2
10
75°C
2
50°C
5
1.0
5
25°C
2
0.1
5
0.1
0.2
0.3
0.4
0.5
0.6
Forward Voltage, VF -- V
PF(AV) -- IO
0.10
(1)Rectangular wave θ=60°
(2)Rectangular wave θ=120°
(3)Rectangular wave θ=180°
(4)Sine wave θ=180°
0.08
Rectangular
wave
0.06
(2)
(1)
ID00260
(3)
(4)
360°
Sine wave
0.02
180°
0
0.02
0.04
0.06
0.08
0
10
20
30
0.10
360°
Average Output Current, IO -- A
0.12
IFSM -- t
0.14
IT03696
40
50
Reverse Voltage, VR -- V
C -- VR
5
θ
0.04
2
0.01
0.7
Interterminal Capacitance, C -- pF
0
2.8
Surge Forward Current, IFSM(Peak) -- A
Reverse Current, IR -- mA
10
7
5
25°
C
25
°C
3
2
Ta=
1
Forward Current, IF -- mA
Average Forward Power Dissipation, PF(AV) -- W
2
100
7
5
0
Ta=125°C
5
3
2
1.0
7
5
IR -- VR
1000
60
70
ID00261
f=1MHz
3
2
10
7
5
3
2
1.0
1.0
2
3
5
7
10
2
3
Reverse Voltage, VR -- V
5
7 100
ID00263
Current waveform 50Hz sine wave
2.4
IS
20ms
t
2.0
1.6
1.2
0.8
0.4
0
7 0.01
2
3
5
7 0.1
2
Time, t -- s
3
5
7 1.0
2
3
ID00264
No.A0406-3/4
SB01-05C
Outline Drawing
SB01-05C-TB-E
Land Pattern Example
Mass (g) Unit
0.013 mm
* For reference
Unit: mm
2.4
1.0
0.8
0.95
0.95
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.A0406-4/4
