SB2003M-TL-E

Ordering number : EN8371C SB2003M Schottky Barrier Diode http://onsemi.com 30V, 2A, Low IR, Single MCPH6 Applications • High frequency rectification (switching regulators, converters, choppers) Features • Halogen free compliance • Low switching noise • Low leakage current and high reliability due to highly reliable planar structure • Ultrasmall package permitting applied sets to be small and slim (mounting height 0.85mm) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Repetitive Peak Reverse Voltage VRRM 30 Nonrepetitive Peak Reverse Surge Voltage VRSM 35 V V Average Output Current IO 2.0 A Surge Forward Current IFSM 10 A Junction Temperature Tj --55 to +125 °C Storage Temperature Tstg --55 to +125 °C 50Hz sine wave, 1 cycle Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Package Dimensions Product & Package Information unit : mm (typ) 7022A-014 • Package : MCPH6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 6 5 4 0 to 0.02 1 2 3 0.65 Marking SE LOT No. TL 0.3 0.85 0.25 Packing Type : TL LOT No. 0.07 SB2003M-TL-E SB2003M-TL-W 0.15 2.1 1.6 0.25 2.0 1 2 3 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Cathode 6 : Cathode 6 5 4 MCPH6 Electrical Connection 6 5 4 1 2 3 ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. Semiconductor Components Industries, LLC, 2014 June, 2014 61714HK TC-00002878/N0712TKIM/62310TKIM/62405MSIM SB No.8371-1/4 SB2003M Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current IR Ratings Conditions min IR=0.2mA IF=1.0A Interterminal Capacitance C Reverse Recovery Time trr IF=IR=100mA, See specified Test Circuit. 0.45 0.45 0.50 75 2 When mounted on ceramic substrate (500mm ×0.8mm) V V µA pF 20 1.44mm2×0.03mm on glass epoxy substrate Rth(j-a)2 V 0.40 30 When mounted in Cu-foiled area of Rth(j-a)1 Unit max 30 IF=2.0A VR=15V VR=10V, f=1MHz Thermal Resistance typ ns 93.4 °C / W 71.4 °C / W Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 50Ω 100Ω 10Ω 10µs 10mA Duty≤10% 100mA 100mA trr Test Cicuit --5V trr Ordering Information Package Shipping memo SB2003M-TL-E Device MCPH6 3,000pcs./reel Pb-Free SB2003M-TL-W MCPH6 3,000pcs./reel Pb-Free and Halogen Free IF -- VF 7 5 Reverse Current, IR -- mA 1.0 1.0 7 5 3 2 7 5 3 2 75°C 0.1 7 5 3 2 50°C 7 5 3 2 25°C 7 5 3 2 0°C 0.01 0.001 0.1 7 5 Ta= 125 °C 100 °C 75° C 50° C 25° C 0°C --25 °C Forward Current, IF -- A Ta=125°C 100°C 7 5 3 2 3 2 3 0.0001 7 5 3 2 --25°C 0.00001 2 0.01 IR -- VR 10 7 5 3 2 0 0.1 0.2 0.3 0.4 Forward Voltage, VF -- V 0.5 0.6 IT08588 0.000001 0 5 10 15 20 25 Reverse Voltage, VR -- V 30 35 IT08589 No.8371-2/4 C -- VR Interterminal Capacitance, C -- pF 7 5 3 2 100 7 5 3 2 0.1 2 3 5 7 1.0 3 5 7 10 Reverse Voltage, VR -- V 2 IFSM -- t 14 Surge Forward Current, IFSM(Peak) -- A 2 3 5 7 IT08590 Average Forward Power Dissipation, PF(AV) -- W SB2003M 1.4 Rectangular wave 1.2 PF(AV) -- IO (1) (2)(4)(3) θ 360° 1.0 Sine wave 0.8 180° 360° 0.6 0.4 0.2 0 0 0.5 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 1.0 1.5 2.0 Average Output Current, IO -- A 2.5 IT08591 Current waveform 50Hz sine wave 12 IS 20ms t 10 8 6 4 2 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00435 No.8371-3/4 SB2003M Outline Drawing SB2003M-TL-E, SB2003M-TL-W Land Pattern Example Mass (g) Unit 0.008 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.8371-4/4