SCH1439-TL-W

SCH1439 Power MOSFET 30V, 72mΩ, 3.5A, Single N-Channel This low-profile high-power MOSFET is produced using ON Semiconductor’s trench technology, which is specifically designed to minimize gate charge and ultra low on resistance. This device is suitable for applications with low gate charge driving or ultra low on resistance requirements. Features  Low On-Resistance  4V drive  ESD Diode-Protected Gate  Pb-Free, Halogen Free and RoHS compliance  Ultra small package SCH6 (1.6mm×1.6mm×0.56mmt) www.onsemi.com VDSS RDS(on) Max 72mΩ@ 10V ID Max 30V 110mΩ@ 4.5V 3.5A 128mΩ@ 4V ELECTRICAL CONNECTION N-Channel Typical Applications  Load Switch  Battery Switch 1, 2, 5, 6 SPECIFICATIONS ABSOLUTE MAXIMUM RATING at Ta = 25C (Note 1) Parameter Symbol Value Unit Drain to Source Voltage VDSS 30 V Gate to Source Voltage VGSS ID 20 V 3.5 A Drain Current (DC) 14 A Power Dissipation When mounted on ceramic substrate 2 (900mm  0.8mm) PD 1 W Junction Temperature Tj 150 C Storage Temperature Tstg 55 to +150 C Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Parameter Symbol Value RJA © Semiconductor Components Industries, LLC, 2015 September 2015 - Rev. 2 PACKING TYPE : TL MARKING ZQ TL ORDERING INFORMATION See detailed ordering and shipping information on page 5 of this data sheet. THERMAL RESISTANCE RATINGS Junction to Ambient When mounted on ceramic substrate 2 (900mm  0.8mm) 4 LOT No. IDP 3 LOT No. Drain Current (Pulse) PW  10s, duty cycle  1% 1 : Drain 2 : Drain 3 : Gate 4 : Source 5 : Drain 6 : Drain Unit 125 1 C/W Publication Order Number : SCH1439/D SCH1439 ELECTRICAL CHARACTERISTICS at Ta  25C (Note 2) Parameter Symbol Drain to Source Breakdown Voltage V(BR)DSS Zero-Gate Voltage Drain Current IDSS Gate to Source Leakage Current IGSS VGS(th) gFS Gate Threshold Voltage Forward Transconductance Conditions Value min ID=1mA, VGS=0V VDS=30V, VGS=0V VGS=16V, VDS=0V 30 VDS=10V, ID=1mA 1.2 typ max Unit V 1 A 10 A 2.6 V VDS=10V, ID=1.5A 1.8 RDS(on)1 RDS(on)2 ID=1.5A, VGS=10V 55 72 m ID=1A, VGS=4.5V 78 110 m RDS(on)3 Ciss ID=1A, VGS=4V 91 128 m Output Capacitance Coss VDS=10V, f=1MHz 60 pF Reverse Transfer Capacitance Crss 30 pF Turn-ON Delay Time td(on) 5.8 ns Rise Time tr Turn-OFF Delay Time td(off) Fall Time tf Static Drain to Source On-State Resistance Input Capacitance Total Gate Charge Qg Gate to Source Charge Qgs Gate to Drain “Miller” Charge Qgd 280 See specified Test Circuit VDS=15V, VGS=10V, ID=3.5A S pF 8.0 ns 21 ns 9.7 ns 5.6 nC 1.2 nC 0.8 nC VSD Forward Diode Voltage IS=3.5A, VGS=0V 0.84 1.2 V Note 2 : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Switching Time Test Circuit VDD=15V VIN 10V 0V ID=1.5A RL=10 VIN VOUT D PW=10s D.C.≤1% G P.G 50 S SCH1439 www.onsemi.com 2 SCH1439 www.onsemi.com 3 SCH1439 www.onsemi.com 4 SCH1439 PACKAGE DIMENSIONS unit : mm SOT-563 / SCH6 CASE 463AB ISSUE O 1 : Drain 2 : Drain 3 : Gate 4 : Source 5 : Drain 6 : Drain Recommended Soldering Footprint 1.4 0.4 0.3 0.5 0.5 ORDERING INFORMATION Device Marking Package Shipping (Qty / Packing) ZQ SOT-563 / SCH6 (Pb-Free / Halogen Free) 5,000 / Tape & Reel SCH1439-TL-H SCH1439-TL-W † For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF Note on usage : Since the SCH1439 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. www.onsemi.com 5