SMBT3904DW1T1G

MBT3904DW1, MBT3904DW2, SMBT3904DW1, NSVMBT3904DW1 Dual General Purpose Transistors www.onsemi.com The MBT3904DW1 and MBT3904DW2 devices are a spin−off of our popular SOT−23/SOT−323 three−leaded device. It is designed for general purpose amplifier applications and is housed in the SOT−363 six−leaded surface mount package. By putting two discrete devices in one package, this device is ideal for low−power surface mount applications where board space is at a premium. MARKING DIAGRAM 6 SOT−363/SC−88/ SC70−6 CASE 419B 6 1 XX MG G 1 Features • • • • • • • • hFE, 100−300 Low VCE(sat), ≤ 0.4 V Simplifies Circuit Design Reduces Board Space Reduces Component Count Available in 8 mm, 7−inch/3,000 Unit Tape and Reel S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant XX = MA for MBT3904DW1T1G MJ for MBT3904DW2T1G M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) (3) (2) Q1 Q2 (4) (5) Symbol Value Unit Collector −Emitter Voltage VCEO 40 Vdc Collector −Base Voltage VCBO 60 Vdc Emitter −Base Voltage VEBO 6.0 Vdc IC 200 mAdc Collector Current − Continuous Electrostatic Discharge ESD HBM Class 2 MM Class B Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Characteristic Symbol Max Unit PD 150 mW Thermal Resistance, Junction−to−Ambient RqJA 833 Junction and Storage Temperature Range TJ, Tstg Total Package Dissipation (Note 1) TA = 25°C June, 2015 − Rev. 11 (3) (2) °C −55 to +150 1 (1) Q2 Q1 (4) (5) (6) MBT3904DW2T1 STYLE 27 ORDERING INFORMATION Device Package Shipping† MBT3904DW1T1G, MBT3904DW2T1G SOT−363 (Pb−Free) 3000 / Tape & Reel SMBT3904DW1T1G SOT−363 (Pb−Free) 3000 / Tape & Reel NSVMBT3904DW1T3G SOT−363 (Pb−Free) 10000 / Tape & Reel °C/W 1. Device mounted on FR4 glass epoxy printed circuit board using the minimum recommended footprint. © Semiconductor Components Industries, LLC, 2015 (6) MBT3904DW1T1 STYLE 1 MAXIMUM RATINGS Rating (1) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: MBT3904DW1T1/D MBT3904DW1, MBT3904DW2, SMBT3904DW1, NSVMBT3904DW1 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max 40 − 60 − 6.0 − − 50 − 50 40 70 100 60 30 − − 300 − − − − 0.2 0.3 0.65 − 0.85 0.95 300 − − 4.0 − 8.0 1.0 2.0 10 12 0.5 0.1 8.0 10 100 100 400 400 1.0 3.0 40 60 − 5.0 Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (Note 2) (IC = 1.0 mAdc, IB = 0) V(BR)CEO Collector −Base Breakdown Voltage (IC = 10 mAdc, IE = 0) V(BR)CBO Emitter −Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO Base Cutoff Current (VCE = 30 Vdc, VEB = 3.0 Vdc) IBL Collector Cutoff Current (VCE = 30 Vdc, VEB = 3.0 Vdc) ICEX Vdc Vdc Vdc nAdc nAdc ON CHARACTERISTICS (Note 2) DC Current Gain (IC = 0.1 mAdc, VCE = 1.0 Vdc) (IC = 1.0 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 50 mAdc, VCE = 1.0 Vdc) (IC = 100 mAdc, VCE = 1.0 Vdc) hFE Collector −Emitter Saturation Voltage (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc) VCE(sat) Base −Emitter Saturation Voltage (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc) VBE(sat) − Vdc Vdc SMALL− SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz) fT Output Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Cobo Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Cibo Input Impedance (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hie Voltage Feedback Ratio (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hre Small −Signal Current Gain (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hfe Output Admittance (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hoe Noise Figure (VCE = 5.0 Vdc, IC = 100 mAdc, RS = 1.0 k W, f = 1.0 kHz) NF 2. Pulse Test: Pulse Width ≤ 300 ms; Duty Cycle ≤ 2.0%. www.onsemi.com 2 MHz pF pF kW X 10− 4 − mmhos dB MBT3904DW1, MBT3904DW2, SMBT3904DW1, NSVMBT3904DW1 SWITCHING CHARACTERISTICS Symbol Min Max Delay Time (VCC = 3.0 Vdc, VBE = − 0.5 Vdc) Characteristic td − 35 Rise Time (IC = 10 mAdc, IB1 = 1.0 mAdc) tr − 35 Storage Time (VCC = 3.0 Vdc, IC = 10 mAdc) ts − 200 Fall Time (IB1 = IB2 = 1.0 mAdc) tf − 50 DUTY CYCLE = 2% 300 ns +3 V +10.9 V 10 < t1 < 500 ms 275 DUTY CYCLE = 2% t1 Unit ns ns +3 V +10.9 V 275 10 k 10 k 0 -0.5 V Cs < 4 pF* < 1 ns 1N916 -9.1 V′ < 1 ns * Total shunt capacitance of test jig and connectors Figure 1. Delay and Rise Time Equivalent Test Circuit Figure 2. Storage and Fall Time Equivalent Test Circuit www.onsemi.com 3 Cs < 4 pF* MBT3904DW1, MBT3904DW2, SMBT3904DW1, NSVMBT3904DW1 TYPICAL TRANSIENT CHARACTERISTICS TJ = 25°C TJ = 125°C 10 5000 2000 5.0 Q, CHARGE (pC) CAPACITANCE (pF) VCC = 40 V IC/IB = 10 3000 7.0 Cibo 3.0 Cobo 2.0 1000 700 500 QT 300 200 QA 1.0 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 100 70 50 20 30 40 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) Figure 3. Capacitance Figure 4. Charge Data 500 200 500 IC/IB = 10 100 70 tr @ VCC = 3.0 V 50 30 20 VCC = 40 V IC/IB = 10 300 200 t r, RISE TIME (ns) 300 200 TIME (ns) 1.0 REVERSE BIAS VOLTAGE (VOLTS) 40 V 100 70 50 30 20 15 V 10 7 5 10 2.0 V td @ VOB = 0 V 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) Figure 5. Turn −On Time Figure 6. Rise Time IC/IB = 10 200 500 t′s = ts - 1/8 tf IB1 = IB2 VCC = 40 V IB1 = IB2 300 200 IC/IB = 20 t f , FALL TIME (ns) t s′ , STORAGE TIME (ns) IC/IB = 20 200 IC, COLLECTOR CURRENT (mA) 500 300 200 7 5 100 70 IC/IB = 20 50 IC/IB = 10 30 20 100 70 50 10 10 7 5 7 5 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200 IC/IB = 10 30 20 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 7. Storage Time Figure 8. Fall Time www.onsemi.com 4 200 MBT3904DW1, MBT3904DW2, SMBT3904DW1, NSVMBT3904DW1 TYPICAL AUDIO SMALL−SIGNAL CHARACTERISTICS NOISE FIGURE VARIATIONS (VCE = 5.0 Vdc, TA = 25°C, Bandwidth = 1.0 Hz) 14 12 SOURCE RESISTANCE = 200 W IC = 1.0 mA NF, NOISE FIGURE (dB) NF, NOISE FIGURE (dB) 10 f = 1.0 kHz SOURCE RESISTANCE = 200 W IC = 0.5 mA 8 6 SOURCE RESISTANCE = 1.0 k IC = 50 mA 4 SOURCE RESISTANCE = 500 W IC = 100 mA 2 0 0.1 0.2 0.4 1.0 2.0 IC = 1.0 mA 12 IC = 0.5 mA 10 IC = 50 mA 8 IC = 100 mA 6 4 2 4.0 10 20 40 0 100 0.1 0.2 0.4 1.0 2.0 4.0 10 20 f, FREQUENCY (kHz) RS, SOURCE RESISTANCE (k OHMS) Figure 9. Noise Figure Figure 10. Noise Figure 40 100 5.0 10 5.0 10 h PARAMETERS (VCE = 10 Vdc, f = 1.0 kHz, TA = 25°C) 100 hoe, OUTPUT ADMITTANCE (m mhos) h fe , CURRENT GAIN 300 200 100 70 50 30 0.1 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 50 20 10 5 2 1 10 0.1 0.2 Figure 11. Current Gain hre , VOLTAGE FEEDBACK RATIO (x 10 -4) Figure 12. Output Admittance h ie , INPUT IMPEDANCE (k OHMS) 20 10 5.0 2.0 1.0 0.5 0.2 0.1 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 10 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.1 Figure 13. Input Impedance 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) Figure 14. Voltage Feedback Ratio www.onsemi.com 5 MBT3904DW1, MBT3904DW2, SMBT3904DW1, NSVMBT3904DW1 h FE, DC CURRENT GAIN (NORMALIZED) TYPICAL STATIC CHARACTERISTICS 2.0 TJ = +125°C VCE = 1.0 V +25°C 1.0 0.7 -55°C 0.5 0.3 0.2 0.1 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 70 50 100 200 IC, COLLECTOR CURRENT (mA) VCE, COLLECTOR EMITTER VOLTAGE (VOLTS) Figure 15. DC Current Gain 1.0 TJ = 25°C 0.8 IC = 1.0 mA 10 mA 30 mA 100 mA 0.6 0.4 0.2 0 0.01 0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 IB, BASE CURRENT (mA) Figure 16. Collector Saturation Region 1.0 1.2 TJ = 25°C VBE(sat) @ IC/IB =10 0.8 VBE @ VCE =1.0 V 0.6 0.4 VCE(sat) @ IC/IB =10 qVC FOR VCE(sat) 0 -55°C TO +25°C -0.5 -55°C TO +25°C -1.0 +25°C TO +125°C qVB FOR VBE(sat) -1.5 0.2 0 +25°C TO +125°C 0.5 COEFFICIENT (mV/ °C) V, VOLTAGE (VOLTS) 1.0 1.0 2.0 5.0 10 20 50 100 -2.0 200 0 20 40 60 80 100 120 140 160 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 17. “ON” Voltages Figure 18. Temperature Coefficients www.onsemi.com 6 180 200 MBT3904DW1, MBT3904DW2, SMBT3904DW1, NSVMBT3904DW1 TYPICAL STATIC CHARACTERISTICS 1 VCE = 1 V TA = 25°C IC, COLLECTOR CURRENT (A) fT, CURRENT−GAIN−BANDWIDTH PRODUCT (MHz) 1000 100 10 10 mSec 100 mSec 0.1 1.0 mSec 1.0 Sec Thermal Limit 0.01 0.001 0.1 1 10 100 1000 1 10 IC, COLLECTOR CURRENT (mA) VCE, COLLECTOR EMITTER VOLTAGE (V) Figure 19. Current Gain Bandwidth Product Figure 20. Safe Operating Area www.onsemi.com 7 100 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SC−88/SC70−6/SOT−363 CASE 419B−02 ISSUE Y 1 SCALE 2:1 DATE 11 DEC 2012 2X aaa H D D H A D 6 5 GAGE PLANE 4 1 2 L L2 E1 E DETAIL A 3 aaa C 2X bbb H D 2X 3 TIPS e B 6X b ddd TOP VIEW C A-B D M A2 DETAIL A A 6X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSIONS D AND E1 DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.20 PER END. 4. DIMENSIONS D AND E1 AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY AND DATUM H. 5. DATUMS A AND B ARE DETERMINED AT DATUM H. 6. DIMENSIONS b AND c APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.08 AND 0.15 FROM THE TIP. 7. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 TOTAL IN EXCESS OF DIMENSION b AT MAXIMUM MATERIAL CONDITION. THE DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OF THE FOOT. ccc C A1 SIDE VIEW C SEATING PLANE END VIEW c RECOMMENDED SOLDERING FOOTPRINT* 6X DIM A A1 A2 b C D E E1 e L L2 aaa bbb ccc ddd MILLIMETERS MIN NOM MAX −−− −−− 1.10 0.00 −−− 0.10 0.70 0.90 1.00 0.15 0.20 0.25 0.08 0.15 0.22 1.80 2.00 2.20 2.00 2.10 2.20 1.15 1.25 1.35 0.65 BSC 0.26 0.36 0.46 0.15 BSC 0.15 0.30 0.10 0.10 GENERIC MARKING DIAGRAM* 6 XXXMG G 6X 0.30 INCHES NOM MAX −−− 0.043 −−− 0.004 0.035 0.039 0.008 0.010 0.006 0.009 0.078 0.086 0.082 0.086 0.049 0.053 0.026 BSC 0.010 0.014 0.018 0.006 BSC 0.006 0.012 0.004 0.004 MIN −−− 0.000 0.027 0.006 0.003 0.070 0.078 0.045 0.66 1 2.50 0.65 PITCH XXX = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. *Date Code orientation and/or position may vary depending upon manufacturing location. *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. STYLES ON PAGE 2 DOCUMENT NUMBER: DESCRIPTION: 98ASB42985B SC−88/SC70−6/SOT−363 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 2 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com SC−88/SC70−6/SOT−363 CASE 419B−02 ISSUE Y DATE 11 DEC 2012 STYLE 1: PIN 1. EMITTER 2 2. BASE 2 3. COLLECTOR 1 4. EMITTER 1 5. BASE 1 6. COLLECTOR 2 STYLE 2: CANCELLED STYLE 3: CANCELLED STYLE 4: PIN 1. CATHODE 2. CATHODE 3. COLLECTOR 4. EMITTER 5. BASE 6. ANODE STYLE 5: PIN 1. ANODE 2. ANODE 3. COLLECTOR 4. EMITTER 5. BASE 6. CATHODE STYLE 6: PIN 1. ANODE 2 2. N/C 3. CATHODE 1 4. ANODE 1 5. N/C 6. CATHODE 2 STYLE 7: PIN 1. SOURCE 2 2. DRAIN 2 3. GATE 1 4. SOURCE 1 5. DRAIN 1 6. GATE 2 STYLE 8: CANCELLED STYLE 9: PIN 1. EMITTER 2 2. EMITTER 1 3. COLLECTOR 1 4. BASE 1 5. BASE 2 6. COLLECTOR 2 STYLE 10: PIN 1. SOURCE 2 2. SOURCE 1 3. GATE 1 4. DRAIN 1 5. DRAIN 2 6. GATE 2 STYLE 11: PIN 1. CATHODE 2 2. CATHODE 2 3. ANODE 1 4. CATHODE 1 5. CATHODE 1 6. ANODE 2 STYLE 12: PIN 1. ANODE 2 2. ANODE 2 3. CATHODE 1 4. ANODE 1 5. ANODE 1 6. CATHODE 2 STYLE 13: PIN 1. ANODE 2. N/C 3. COLLECTOR 4. EMITTER 5. BASE 6. CATHODE STYLE 14: PIN 1. VREF 2. GND 3. GND 4. IOUT 5. VEN 6. VCC STYLE 15: PIN 1. ANODE 1 2. ANODE 2 3. ANODE 3 4. CATHODE 3 5. CATHODE 2 6. CATHODE 1 STYLE 16: PIN 1. BASE 1 2. EMITTER 2 3. COLLECTOR 2 4. BASE 2 5. EMITTER 1 6. COLLECTOR 1 STYLE 17: PIN 1. BASE 1 2. EMITTER 1 3. COLLECTOR 2 4. BASE 2 5. EMITTER 2 6. COLLECTOR 1 STYLE 18: PIN 1. VIN1 2. VCC 3. VOUT2 4. VIN2 5. GND 6. VOUT1 STYLE 19: PIN 1. I OUT 2. GND 3. GND 4. V CC 5. V EN 6. V REF STYLE 20: PIN 1. COLLECTOR 2. COLLECTOR 3. BASE 4. EMITTER 5. COLLECTOR 6. COLLECTOR STYLE 21: PIN 1. ANODE 1 2. N/C 3. ANODE 2 4. CATHODE 2 5. N/C 6. CATHODE 1 STYLE 22: PIN 1. D1 (i) 2. GND 3. D2 (i) 4. D2 (c) 5. VBUS 6. D1 (c) STYLE 23: PIN 1. Vn 2. CH1 3. Vp 4. N/C 5. CH2 6. N/C STYLE 24: PIN 1. CATHODE 2. ANODE 3. CATHODE 4. CATHODE 5. CATHODE 6. CATHODE STYLE 25: PIN 1. BASE 1 2. CATHODE 3. COLLECTOR 2 4. BASE 2 5. EMITTER 6. COLLECTOR 1 STYLE 26: PIN 1. SOURCE 1 2. GATE 1 3. DRAIN 2 4. SOURCE 2 5. GATE 2 6. DRAIN 1 STYLE 27: PIN 1. BASE 2 2. BASE 1 3. COLLECTOR 1 4. EMITTER 1 5. EMITTER 2 6. COLLECTOR 2 STYLE 28: PIN 1. DRAIN 2. DRAIN 3. GATE 4. SOURCE 5. DRAIN 6. DRAIN STYLE 29: PIN 1. ANODE 2. ANODE 3. COLLECTOR 4. EMITTER 5. BASE/ANODE 6. CATHODE STYLE 30: PIN 1. SOURCE 1 2. DRAIN 2 3. DRAIN 2 4. SOURCE 2 5. GATE 1 6. DRAIN 1 Note: Please refer to datasheet for style callout. If style type is not called out in the datasheet refer to the device datasheet pinout or pin assignment. DOCUMENT NUMBER: DESCRIPTION: 98ASB42985B SC−88/SC70−6/SOT−363 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 2 OF 2 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative