SMMBTA06WT1G

MMBTA06W, SMMBTA06W, Driver Transistor NPN Silicon Features • Moisture Sensitivity Level: 1 • ESD Rating: www.onsemi.com ♦ • • Human Body Model − 4 kV ♦ Machine Model − 400 V S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant* SC−70 CASE 419 STYLE 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector−Emitter Voltage VCEO 80 Vdc Collector−Base Voltage VCBO 80 Vdc Emitter−Base Voltage VEBO 4.0 Vdc IC 500 mAdc Symbol Max Unit Collector Current − Continuous COLLECTOR 3 1 BASE 2 EMITTER THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR−5 Board TA = 25°C Thermal Resistance, Junction to Ambient (Note 1) Junction and Storage Temperature PD MARKING DIAGRAM mW 460 GM MG G °C/W RqJA 272 TJ, Tstg 1 °C −55 to +150 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR−4 Board, 1 oz. Cu, 100 mm2. GM M G = Specific Device Code = Date Code = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION Package Shipping† MMBTA06WT1G SC−70 (Pb−Free) 3,000 / Tape & Reel SMMBTA06WT1G SC−70 (Pb−Free) 3,000 / Tape & Reel SMMBTA06WT3G SC−70 (Pb−Free) 10,000 / Tape & Reel Device *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2012 September, 2018 − Rev. 5 1 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: MMBTA06WT1/D MMBTA06W, SMMBTA06W, ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max 80 − 4.0 − − 0.1 − 0.1 100 100 − − − 0.25 − 1.2 100 − Unit OFF CHARACTERISTICS Collector−Emitter Breakdown Voltage (Note 1) (IC = 1.0 mAdc, IB = 0) V(BR)CEO Emitter−Base Breakdown Voltage (IE = 100 mAdc, IC = 0) V(BR)EBO Collector Cutoff Current (VCE = 60 Vdc, IB = 0) ICES Collector Cutoff Current (VCB = 80 Vdc, IE = 0) ICBO Vdc Vdc mAdc mAdc ON CHARACTERISTICS DC Current Gain (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 100 mAdc, VCE = 1.0 Vdc) hFE Collector−Emitter Saturation Voltage (IC = 100 mAdc, IB = 10 mAdc) VCE(sat) Base−Emitter On Voltage (IC = 100 mAdc, VCE = 1.0 Vdc) VBE(on) − Vdc Vdc SMALL− SIGNAL CHARACTERISTICS Current−Gain − Bandwidth Product (Note 2) (IC = 10 mA, VCE = 2.0 V, f = 100 MHz) fT MHz Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2.0%. 2. fT is defined as the frequency at which |hfe| extrapolates to unity. TURN-ON TIME TURN-OFF TIME VCC -1.0 V VCC +VBB +40 V 5.0 ms 100 +40 V RL 100 OUTPUT +10 V Vin tr = 3.0 ns OUTPUT RB 0 Vin * CS t 6.0 pF 5.0 mF RL RB * CS t 6.0 pF 5.0 mF 100 100 5.0 ms tr = 3.0 ns *Total Shunt Capacitance of Test Jig and Connectors For PNP Test Circuits, Reverse All Voltage Polarities Figure 1. Switching Time Test Circuits www.onsemi.com 2 300 200 80 VCE = 2.0 V TJ = 25°C C, CAPACITANCE (pF) 40 100 70 Cibo 20 10 8.0 50 Cobo 6.0 30 2.0 3.0 5.0 7.0 10 20 30 50 70 100 4.0 0.1 200 2.0 5.0 10 20 Figure 3. Capacitance 1.0 k 700 500 200 100 70 50 10 1.0 Figure 2. Current−Gain — Bandwidth Product ts tf VCC = 40 V IC/IB = 10 IB1 = IB2 TJ = 25°C 30 0.5 VR, REVERSE VOLTAGE (VOLTS) 300 20 0.2 IC, COLLECTOR CURRENT (mA) 1.0 k 700 500 t, TIME (ns) TJ = 25°C 60 I C , COLLECTOR CURRENT (mA) f T , CURRENT-GAIN - BANDWIDTH PRODUCT (MHz MMBTA06W, SMMBTA06W, 5.0 7.0 10 tr 50 100 100 ms 1.0 ms 300 1.0 s TC = 25°C 200 TA = 25°C 100 70 50 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 30 20 td @ VBE(off) = 0.5 V 20 30 50 70 100 200 300 10 1.0 500 2.0 IC, COLLECTOR CURRENT (mA) 3.0 5.0 7.0 10 20 30 50 70 100 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 4. Switching Time Figure 5. Active−Region Safe Operating Area 400 1.0 TJ = 25°C TJ = 125°C 0.8 200 V, VOLTAGE (VOLTS) h FE , DC CURRENT GAIN VCE = 1.0 V 25°C -55°C 100 80 0.6 VBE(on) @ VCE = 1.0 V 0.4 0.2 60 40 0.5 VBE(sat) @ IC/IB = 10 VCE(sat) @ IC/IB = 10 1.0 2.0 3.0 5.0 10 20 30 50 100 0 0.5 200 300 500 1.0 2.0 5.0 10 20 50 100 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 6. DC Current Gain Figure 7. “ON” Voltages www.onsemi.com 3 200 500 1.0 -0.8 R qVB , TEMPERATURE COEFFICIENT (mV/° C) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) MMBTA06W, SMMBTA06W, TJ = 25°C 0.8 -1.2 IC = 250 mA IC = 100 mA IC = 50 mA IC = 500 mA 0.6 -1.6 0.2 RqVB for VBE -2.0 0.4 IC = 10 mA -2.4 0 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 -2.8 0.5 50 1.0 2.0 5.0 10 20 50 100 200 IB, BASE CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 8. Collector Saturation Region Figure 9. Base−Emitter Temperature Coefficient www.onsemi.com 4 500 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SC−70 (SOT−323) CASE 419 ISSUE R DATE 11 OCT 2022 SCALE 4:1 GENERIC MARKING DIAGRAM XX MG G 1 XX M G = Specific Device Code = Date Code = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. STYLE 1: CANCELLED STYLE 6: PIN 1. EMITTER 2. BASE 3. COLLECTOR DOCUMENT NUMBER: DESCRIPTION: STYLE 2: PIN 1. ANODE 2. N.C. 3. CATHODE STYLE 3: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 4: PIN 1. CATHODE 2. CATHODE 3. ANODE STYLE 5: PIN 1. ANODE 2. ANODE 3. CATHODE STYLE 7: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 8: PIN 1. GATE 2. SOURCE 3. DRAIN STYLE 9: PIN 1. ANODE 2. CATHODE 3. CATHODE-ANODE STYLE 10: PIN 1. CATHODE 2. ANODE 3. ANODE-CATHODE 98ASB42819B SC−70 (SOT−323) STYLE 11: PIN 1. CATHODE 2. CATHODE 3. CATHODE Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative