SS14HE

SS13HE, NRVBSS13HE Series Surface Mount Schottky Barrier Rectifiers 1 A, 30 V − 60 V www.onsemi.com Features • • • • • • Very Low Profile − Typical Height of 0.68 mm Low Power Loss, High Efficiency Moisture Sensitivity Level 1 per J−STD−020 UL Flammability 94V−0 Classification RoHS Compliant / Green Molding Compound NRVB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable 1 Cathode 2 Anode SOD−323HE CASE 477AD ORDERING INFORMATION Part Number Top Mark Package Packing Method† SS13HE 1A SOD−323HE Tape and Reel SS14HE 1B SOD−323HE Tape and Reel SS16HE 1C SOD−323HE Tape and Reel NRVBSS13HE 1A SOD−323HE Tape and Reel NRVBSS14HE 1B SOD−323HE Tape and Reel NRVBSS16HE 1C SOD−323HE Tape and Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2015 June, 2018 − Rev. 2 1 Publication Order Number: SS13HE/D SS13HE, NRVBSS13HE Series Table 1. ABSOLUTE MAXIMUM RATINGS Values are at TA = 25°C unless otherwise noted. Value SS13HE SS14HE SS16HE Unit Maximum Repetitive Peak Reverse Voltage 30 40 60 V Reverse Voltage 30 40 60 V Parameter Symbol VRRM VR IF(AV) Maximum Average Forward Rectified Current 1 A IFSM Peak Forward Surge Current: 8.3 ms Single Half Sine−Wave Superimposed on Rated Load 25 A Operating Junction Temperature Range −55 to +150 °C Storage Temperature Range −55 to +150 °C TJ TSTG Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Table 2. THERMAL CHARACTERISTICS (Note 1) Values are at TA = 25°C unless otherwise noted. Symbol Parameter Value Unit YJL Junction−to−Lead Thermal Resistance Thermocouple Soldered to Cathode 21 °C/W RqJA Junction−to−Ambient Thermal Resistance (Note 1) 199 °C/W 1. Per JESD51−3 Recommended Thermal Test Board. Device mounted on FR−4 PCB, board size = 76.2 mm x 114.3 mm Table 3. ELECTRICAL CHARACTERISTICS Values are at TA = 25°C unless otherwise noted. Symbol VF Parameter Instantaneous Forward Voltage (Note 2) Conditions IF = 0.5 A, TJ = 25°C IF = 0.5 A, TJ = 125°C Reverse Current at Rated VR 0.40 0.50 Junction Capacitance 0.51 IF = 0.5 A, TJ = 125°C 0.45 IF = 1.0 A, TJ = 25°C 0.61 0.68 IF = 1.0 A, TJ = 125°C 0.54 0.60 SS13HE, SS14HE 5.0 50 mA 3.0 10 mA SS16HE 2.0 50 mA 1.5 10 mA TJ = 25°C TJ = 125°C CJ 0.31 IF = 1.0 A, TJ = 125°C SS16HE Unit V 0.55 TJ = 25°C Reverse Recovery Time Max 0.46 TJ = 125°C Trr Typ 0.41 IF = 1.0 A, TJ = 25°C IF = 0.5 A, TJ = 25°C IR Min SS13HE, SS14HE IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A VR = 4.0 V, f = 1 MHz SS13HE, SS14HE 5.6 SS16HE 8.3 SS13HE, SS14HE 55 SS16HE 43 ns pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse test with PW = 300 ms, 1% duty cycle www.onsemi.com 2 SS13HE, NRVBSS13HE Series TYPICAL PERFORMANCE CHARACTERISTICS 1 0.8 0.6 0.4 RESISTIVE OR INDUETIVE LOAD 0.2 0 0 25 50 75 100 125 40 PEAK FORWARD SURAGE CURRENT(A) AVERAGE FORWARD CURRENT (A) 1.2 150 8.3ms Single Half Sine−Wave 30 20 10 0 1 10 Figure 1. Forward Current Derating Curve Figure 2. Maximum Non−Repetitive Forward Surge Current 10 10 o TA = 150 C 1 IF − FORWARD CURRENT (A) IF − FORWARD CURRENT (A) 100 NUMBER OF CYCLES AT 60 Hz LEAD TEMPERATURE (°C) o TA = 125 C o TA = 25 C 0.1 o TA = −40 C o TA = 150 C 1 o TA = 125 C o TA = 25 C 0.1 o TA = −40 C o o TA = −55 C 0.01 0.0 0.2 0.4 0.6 TA = −55 C 0.8 0.01 1.0 0.0 0.2 VF − FORWARD VOLTAGE (V) Figure 3. Typical Forward Characteristics − SS13HE / SS14HE 10000 o TA = 150 C o TA = 125 C 100 10 1 o TA = 25 C o o TA = −40 C 0.01 TA = −55 C 0.001 100 o TA = 25 C 0.01 o TA = −40 C 0.001 1E−5 20 100 o TA = 75 C 1 0.1 1E−4 80 o TA = 125 C o TA = 150 C 10 1E−5 20 60 1.0 1000 1E−4 40 0.8 10000 o TA = 75 C 1000 0.1 0.6 Figure 4. Typical Forward Characteristics − SS16HE IR − LEAKAGE CURRENT (mA) IR − LEAKAGE CURRENT (mA) 100000 0.4 VF − FORWARD VOLTAGE (V) PERCENT OF RATED REVERSE VOLTAGE (%) o TA = −55 C 40 60 80 PERCENT OF RATED REVERSE VOLTAGE (%) Figure 5. Typical Reverse Characteristics − SS13HE / SS14HE Figure 6. Typical Reverse Characteristics − SS16HE www.onsemi.com 3 100 SS13HE, NRVBSS13HE Series TYPICAL PERFORMANCE CHARACTERISTICS CAPACITANCE (pF) 1000 SS13HE/SS14HE 100 SS16HE 10 1 0.1 1 10 100 REVERSE VOLTAGE (V) Figure 7. Typical Junction Capacitance www.onsemi.com 4 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SOD−323EP CASE 477AD ISSUE O DATE 31 AUG 2016 2.30 1.75 0.50 1.40 1.15 1.10 1.00 2.00 TOP VIEW 0.80 LAND PATTERN RECOMMENDATION 0.75 0.55 2.70 2.30 FRONT VIEW 1.55 1.10 0.80 0.40 0.95 0.65 0.20 0.10 NOTES: A. THIS PACKAGE DOES NOT CONFORM TO ANY STANDARDS. B. ALL DIMENSIONS ARE IN MILLIMETERS. 0.85 C. DIMENSIONS ARE EXCLUSIVE OF BURRS, 0.45 MOLD FLASH AND TIE BAR PROTRUSIONS. BOTTOM VIEW DOCUMENT NUMBER: DESCRIPTION: 98AON13727G SOD−323EP Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: SS13HE SS14HE SS16HE NRVBSS13HE NRVBSS14HE NRVBSS16HE