DATA SHEET
www.onsemi.com
Schottky Barrier Rectifiers,
Surface Mount,
1 A, 50 V - 150 V
1
Cathode
2
Anode
Rectifier
SS15FA - S115FA
2
Features
•
•
•
•
•
•
•
Low Power Loss, High Efficiency
Guard Ring for Overvoltage Protection
High Surge Current Capability
UL Flammability 94V−0 Classification
MSL 1 per J−STD−020
Green Molding Compound
These Devices are Pb−Free and are RoHS Compliant
1
SOD−123FL
CASE 425AB
MARKING DIAGRAM
YYYY
ZXXXW
YYYY
Z
XXX
W
Band Indicates Cathode
= Binary Calendar Year Code Scheme
= Assembly Plant Code
= Specific Device Code
= Single Digit Week Code
ORDERING INFORMATION
Part Number
Device Code Marking
Package
Shipping†
SS15FA
15L
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
SS16FA
16L
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
SS19FA
19L
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
S110FA
10L
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
S115FA
1AL
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2016
March, 2022 − Rev. 3
1
Publication Order Number:
S110FA/D
SS15FA − S115FA
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Value
Symbol
Parameter
SS15FA
SS16FA
SS19FA
S110FA
S115FA
Unit
VRRM
Repetitive Peak Reverse Voltage
50
60
90
100
150
V
VRMS
RMS Reverse Voltage
35
42
63
70
105
V
DC Blocking Voltage
50
60
90
100
150
V
VR
IF(AV)
Average Forward Rectified Current
1
A
IFSM
Peak Forward Surge Current: 8.3 ms Single Half Sine−
Wave Superimposed on Rated Load
30
A
Operating Junction Temperature Range
−55 to +150
°C
Storage Temperature Range
−55 to +150
°C
TJ
TSTG
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Note 1)
Symbol
Characteristic
Value
Unit
ΨJL
Junction−to−Lead Thermal Characteristics
16
°C/W
RqJA
Junction−to−Ambient Thermal Resistance
152
°C/W
1. Per JESD51−3 Recommended Thermal Test Board. Device mounted on FR−4 PCB, board size = 76.2 mm x 114.3 mm.
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Value
Symbol
Parameter
Conditions
SS15FA
SS16FA
SS19FA
S110FA
VF
Maximum Instantaneous Forward Voltage
(Note 2)
IF = 0.5 A
0.58
0.70
IF = 1.0 A
0.70
0.80
IR
Maximum Reverse Current
at Rated VR
TJ = 25°C
0.4
0.05
TJ = 100°C
6.0
−
TJ = 125°C
−
0.5
S115FA
Unit
0.75
V
0.90
mA
CJ
Typical Junction Capacitance
VR = 4 V,
f = 1 MHz
54
35
pF
Trr
Typical Reverse Recovery Time
IF = 0.5 A,
IR = 1 A,
IRR = 0.25 A
5.6
8.3
ns
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse test with PW = 300 ms, 1% duty cycle.
www.onsemi.com
2
SS15FA − S115FA
PEAK FORWARD SURGE CURRENT (A)
AVERAGE FORWARD CURRENT (A)
TYPICAL PERFORMANCE CHARACTERISTICS
1.2
SS15FA − S115FA
1
0.8
0.6
0.4
0.2
0
0
25
75
50
100
125
150
LEAD TEMPERATURE (°C)
40
20
10
0
1
IF − FORWARD CURRENT (A)
IF − FORWARD CURRENT (A)
0.1
Figure 2. Maximum Non−Repetitive Forward
Surge Current
SS15FA − SS16FA
TA = 150°C
TA = −55°C
TA = 125°C
TA = −40°C
SS19FA − S110FA
TA = 150°C
0.1
0.2
0.3
0.4
0.5
0.6
0.7
TA = −40°C
TA = 25°C
0.01
0.8
0.0
0.1
VF − FORWARD VOLTAGE (V)
0.4
0.5
0.6
0.7
0.8
10000
IR − REVERSE CURRENT (mA)
S115FA
IF − FORWARD CURRENT (A)
0.3
Figure 4. Typical Forward Characteristics
1
TA = 150°C
0.1
TA = −55°C
TA = 125°C
TA = −40°C
TA = 25°C
0.1
0.2
VF − FORWARD VOLTAGE (V)
Figure 3. Typical Forward Characteristics
0.01
0.0
TA = −55°C
TA = 125°C
0.1
TA = 25°C
0.01
0.0
100
10
1
NUMBER OF CYCLES AT 60 Hz
Figure 1. Forward Current Derating Curve
1
8.3ms Single Half
Sine−Wave
30
0.2
0.3
0.4
0.5
0.6
0.7
1000
100
10
TA = 75°C
TA = 150°C
1
0.1
TA = 25°C
0.01
TA = −55°C
TA = −40°C
0.001
1E−4
SS15FA − SS16FA
1E−5
10
0.8
TA = 125°C
20
30
40
50
60
70
80
90
100
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
VF − FORWARD VOLTAGE (V)
Figure 6. Typical Reverse Characteristics
Figure 5. Typical Forward Characteristics
www.onsemi.com
3
SS15FA − S115FA
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
1000
1000
CJ − JUNCTION CAPACITANCE (pF)
IR − REVERSE CURRENT (mA)
10000
TA = 150°C
100
TA = 125°C
10
1
TA = 75°C
0.1
TA = 25°C
0.01
TA = −40°C
0.001
TA = −55°C
1E−4
1E−5
20
SS19FA − S115FA
30
40
50
60
70
80
90
100
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
SS15FA−SS16FA
100
SS19FA−S115FA
10
1
0.1
1
10
100
VR − REVERSE VOLTAGE (V)
Figure 7. Typical Reverse Characteristics
Figure 8. Typical Junction Capacitance
www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOD−123FA
CASE 425AB
ISSUE A
DOCUMENT NUMBER:
DESCRIPTION:
98AON13722G
SOD−123FA
DATE 11 AUG 2022
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative