Schottky Barrier Rectifiers,
Surface Mount,
2 A, 20 V - 150 V
SS22FA - S215FA
Features
•
•
•
•
•
•
•
•
www.onsemi.com
Low Power Loss, High Efficiency
Guard Ring for Overvoltage Protection
High Surge Current Capability
UL Flammability 94V−0 Classification
MSL 1 per J−STD−020
Green Molding Compound
NRVB Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements;
AEC−Q101 Qualified and PPAP Capable
These Devices are Pb−Free and are RoHS Compliant
1
Cathode
2
Anode
Rectifier
2
1
SOD−123FL
CASE 425AB
MARKING DIAGRAM
&Y
&Z**&G
Band Indicates Cathode
&Y
&Z
**
&G
= Binary Calendar Year Coding Scheme
= Assembly Plant Code
= Specific Device Code
(see “Top Mark” in the table below)
= Single Digit Weekly Date Code
ORDERING INFORMATION
Part Number
Top Mark
Package
Shipping†
SS22FA
22L
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
23L
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
25L
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
29L
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
20L
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
2AL
SOD−123FL
(Pb−Free)
3000 / Tape & Reel
NRVBSS22FA
SS23FA
NRVBSS23FA
SS25FA
NRVBSS25FA
SS29FA
NRVBSS29FA
S210FA
NRVBS210FA
S215FA
NRVBS215FA
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2020
May, 2020 − Rev. 1
1
Publication Order Number:
SS29FA/D
SS22FA − S215FA
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Value
Symbol
Parameter
SS22FA
SS23FA
SS25FA
SS29FA
S210FA
S215FA
Unit
VRRM
Repetitive Peak Reverse Voltage
20
30
50
90
100
150
V
VRMS
RMS Reverse Voltage
14
21
35
63
70
105
V
DC Blocking Voltage
20
30
50
90
100
150
V
VR
IF(AV)
Average Forward Rectified Current
2
A
IFSM
Peak Forward Surge Current: 8.3 ms Single
Half Sine−Wave Superimposed on Rated Load
50
A
TJ
TSTG
Operating Junction Temperature Range
−55 to +125
Storage Temperature Range
°C
−55 to +150
°C
−55 to +150
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Note 1)
Symbol
Characteristic
Value
Unit
ΨJL
Junction−to−Lead Thermal Characteristics
16
°C/W
RqJA
Junction−to−Ambient Thermal Resistance
152
°C/W
1. Per JESD51−3 Recommended Thermal Test Board. Device mounted on FR−4 PCB, board size = 76.2 mm x 114.3 mm.
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Value
Symbol
Parameter
Conditions
VF
Maximum Instantaneous Forward
Voltage (Note 2)
IF = 2 A
IR
Maximum Reverse Current at
Rated VR
SS22FA
SS23FA
0.50
TJ = 25°C
SS25FA
0.70
SS29FA
S210FA
0.85
0.4
TJ = 100°C
Typical Junction Capacitance
Trr
Typical Reverse Recovery Time
Unit
0.95
V
mA
0.1
15
10
VR = 4 V,
f = 1 MHz
120
93
62
48
pF
IF = 0.5 A,
IR = 1 A,
IRR = 0.25 A
10
9
7
13
ns
TJ = 125°C
CJ
S215FA
5
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse test with PW = 300 ms, 1% duty cycle.
www.onsemi.com
2
SS22FA − S215FA
PEAK FORWARD SURGE CURRENT (A)
AVERAGE FORWARD CURRENT (A)
TYPICAL PERFORMANCE CHARACTERISTICS
2.5
2
SS25FA - S215FA
SS22FA − SS23FA
1.5
1
0.5
RESISTIVE OR
INDUCTIVE LOAD
0
60
50
70
80
90
100 110 120 130
140 150 160 170
LEAD TEMPERATURE (°C)
50
30
20
10
0
1
IF − FORWARD CURRENT (A)
IF − FORWARD CURRENT (A)
o
TA= 150 C
o
TA= 125 C
0.1
o
TA= −55 C
0.01
0.0
0.1
0.2
o
TA= −40 C
0.3
0.4
0.5
0.6
0.7
SS25FA
1
o
TA= 150 C
o
TA= 125 C
0.1
o
TA= −55 C
o
TA= 25 C
0.01
0.0
0.8
0.1
VF − FORWARD VOLTAGE (V)
IF − FORWARD CURRENT (A)
IF − FORWARD CURRENT (A)
0.3
0.4
0.5
0.6
0.7
0.8
Figure 4. Typical Forward Characteristics
S210FA
o
TA= 150 C
o
TA= 125 C
0.1
o
TA= −55 C
o
S215FA
1
o
TA= 150 C
o
TA= 125 C
0.1
o
TA= −55 C
o
TA= 25 C
TA= −40 C
o
0.2
o
TA= −40 C
VF − FORWARD VOLTAGE (V)
Figure 3. Typical Forward Characteristics
1
100
Figure 2. Maximum Non−Repetitive Forward
Surge Current
SS22FA−SS23FA
o
TA= 25 C
10
NUMBER OF CYCLES AT 60 Hz
Figure 1. Forward Current Derating Curve
1
8.3ms Single Half Sine−Wave
40
o
TA= −40 C
TA= 25 C
0.01
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.01
0.0
0.8
VF − FORWARD VOLTAGE (V)
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2
VF − FORWARD VOLTAGE (V)
Figure 5. Typical Forward Characteristics
Figure 6. Typical Forward Characteristics
www.onsemi.com
3
SS22FA − S215FA
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
10000
100000
1000
1000
o
TA= 125 C
100
10
Reverse Current, IR [mA]
Reverse Current, IR [mA]
10000
o
o
TA=150 C
TA= 75 C
1
o
TA= 25 C
0.1
o
TA= −40 C
0.01
0.001
1E−4
1E−5
20
o
30
40
50
60
70
80
10
o
TA= 75 C
1
o
0.1
TA= 25 C
0.01
o
TA= −40 C
0.001
1E−4
SS22FA−SS23FA
TA= −55 C
90
1E−5
20
100
o
TA=150 C
o
TA= 125 C
100
o
SS25FA
TA= −55 C
30
40
50
60
70
80
90
100
Percent of Rated Peak Reverse Voltage [%]
Percent of Rated Peak Reverse Voltage [%]
Figure 7. Typical Reverse Characteristics
Figure 8. Typical Reverse Characteristics
10000
10000
1000
1000
100
Reverse Current, IR [mA]
Reverse Current, IR [mA]
o
o
TA=150 C
o
TA= 125 C
10
1
o
o
TA= 25 C
TA= 75 C
0.1
0.01
o
TA= −55 C
o
TA= −40 C
0.001
TA=150 C
o
TA= 125 C
100
10
1
0.1
o
0.01
0.001
o
o
1E−4
1E−5
20
1E−4
S210FA
30
40
50
60
70
80
90
1E−5
20
100
TA= −55 C
TA= −40 C
S215FA
30
40
50
60
70
80
90
100
Percent of Rated Peak Reverse Voltage [%]
Percent of Rated Peak Reverse Voltage [%]
Figure 9. Typical Reverse Characteristics
Figure 10. Typical Reverse Characteristics
1000
Junction Capacitance, CJ [pF]
TA= 25 C
o
TA= 75 C
SS22FA−SS23FA
100
SS25FA
S210FA
S215FA
10
1
0.1
1
10
100
Reverse Voltage, VR [V]
Figure 11. Typical Junction Capacitance
www.onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOD−123FL
CASE 425AB
ISSUE O
DATE 31 AUG 2016
2.90
2.70
1.90
1.70
4.30
1.40
1.90
1.20
TOP VIEW
1.40
1.20
LAND PATTERN RECOMMENDATION
1.43
1.23
3.80
3.40
0.30
0.16
FRONT VIEW
0.85
0.35
2.60
2.45
NOTES:
A. NO INDUSTRY STANDARD APPLIES TO THIS
PACKAGE.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
1.20
0.80
BOTTOM VIEW
DOCUMENT NUMBER:
DESCRIPTION:
98AON13722G
SOD−123FL
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
www.onsemi.com
1
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative