SS28

SS22 - S210 Schottky Rectifier Features Description • Glass-Passivated Junctions The SS22-S210 series includes high-efficiency, low power loss, general-propose Schottky rectifiers. The clipbonded leg structure provides high thermal performance and low electrical resistance. These rectifier are suited for free wheeling, secondary rectification, and reverse polarity protection applications. • High-Current Capability, Low VF Applications • Low Voltage • High-Frequency Inverters • Free Wheeling • Polarity Protection SMB/DO-214AA COLOR BAND DENOTES CATHODE Ordering Information Part Number Marking SS22 SS22 SS23 SS23 SS24 SS24 SS25 SS25 SS26 SS26 SS28 SS28 SS29 SS29 S210 S210 Package Packing Method DO-214AA Tape and Reel Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Symbol Parameter Value SS22 SS23 SS24 SS25 SS26 SS28 SS29 S210 Units VRRM Maximum Repetitive Reverse Voltage IF(AV) Maximum Average Forward Current: 0.375-inch Lead Length at TA = 75°C 2.0 A IFSM Non-Repetitive Peak Forward Surge Current: 8.3 ms Single Half-Sine Wave 50 A TSTG Storage Temperature Range -65 to +150 °C Operating Junction Temperature -65 to +125 °C TJ 20 30 © 2001 Fairchild Semiconductor Corporation SS22 - S210 Rev. 1.1.2 40 50 60 80 90 100 V www.fairchildsemi.com 1 SS22 - S210 — Schottky Rectifier October 2013 Symbol PD RθJA Parameter Value Units Power Dissipation 1.3 W Thermal Resistance, Junction to Ambient(1) 75 °C/W Note: 1. Device mounted on FE-4 PCB 0.013 mm. Electrical Characteristics Values are at TA = 25°C unless otherwise noted. Test Value Conditions SS22 SS23 SS24 SS25 SS26 SS28 SS29 S210 Symbol Parameter VF Forward Voltage IR Reverse Current TA = 25°C at Rated VR TA = 100°C IF = 2.0 A 500 0.4 10 © 2001 Fairchild Semiconductor Corporation SS22 - S210 Rev. 1.1.2 700 850 Units mV mA www.fairchildsemi.com 2 SS22 - S210 — Schottky Rectifier Thermal Characteristics(1) SS22 - S210 — Schottky Rectifier Typical Performance Characteristics Figure 1. Forward Current Derating Curve Figure 2. Forward Current Characteristics Figure 3. Reverse Current vs. Reverse Voltage Figure 4. Total Capacitance Figure 5. Non-Repetitive Surge Current © 2001 Fairchild Semiconductor Corporation SS22 - S210 Rev. 1.1.2 www.fairchildsemi.com 3 SS22 - S210 — Schottky Rectifier Physical Dimension DO-214AA B 5.60 5.08 B 0.13 M C B A 2.50 3.95 3.30 2.20 1.91 B 2.20 4.70 B A 4.75 4.05 LAND PATTERN RECOMMENDATION 8° 0° 2.65 MAX A R0.15 4X 2.45 1.90 GAUGE PLANE 0.45 B C 2.15 1.65 0.30 0.05 0.203 0.050 0.13 M 0.41 0.15 0 -8° C B A NOTES: 1.60 0.75 DETAIL A SCALE 20 : 1 A. EXCEPT WHERE NOTED CONFORMS TO JEDEC DO214 VARIATION AA. B DOES NOT COMPLY JEDEC STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5-1994. F. LAND PATTERN STD. DIOM5336X240M. G. DRAWING FILE NAME: DO214AAREV1 Figure 6. 2-LEAD, SMB, JEDEC DO-214, VARIATION AA (ACTIVE) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/dwg/DO/DO214AA.pdf. © 2001 Fairchild Semiconductor Corporation SS22 - S210 Rev. 1.1.2 www.fairchildsemi.com 4 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPower¥ AX-CAP®* BitSiC¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL¥ Current Transfer Logic¥ DEUXPEED® Dual Cool™ EcoSPARK® EfficientMax¥ ESBC¥ F-PFS¥ FRFET® SM Global Power Resource GreenBridge¥ Green FPS¥ Green FPS¥ e-Series¥ Gmax¥ GTO¥ IntelliMAX¥ ISOPLANAR¥ Making Small Speakers Sound Louder and Better™ MegaBuck¥ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MicroPak2¥ MillerDrive¥ MotionMax¥ mWSaver® OptoHiT¥ OPTOLOGIC® OPTOPLANAR® ® Fairchild® Fairchild Semiconductor® FACT Quiet Series¥ FACT® FAST® FastvCore¥ FETBench¥ FPS¥ Sync-Lock™ ® PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ ¥ Saving our world, 1mW/W/kW at a time™ SignalWise¥ SmartMax¥ SMART START¥ Solutions for Your Success¥ SPM® STEALTH¥ SuperFET® SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS® SyncFET¥ ®* TinyBoost® TinyBuck® TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TranSiC¥ TriFault Detect¥ TRUECURRENT®* PSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ VoltagePlus¥ XS™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its safety or effectiveness. accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I66 © Fairchild Semiconductor Corporation www.fairchildsemi.com