SS29

DATA SHEET www.onsemi.com Schottky Rectifier SCHOTTKY BARRIER RECTIFIER 2.0 AMPERES SS23, SS24, SS25, SS26, SS28, SS29, S210 The SS23−S210 series includes high−efficiency, low power loss, general−propose Schottky rectifiers. The clip−bonded leg structure provides high thermal performance and low electrical resistance. These rectifier are suited for free wheeling, secondary rectification, and reverse polarity protection applications. SMB CASE 403AF Features • Glass−Passivated Junctions • High−Current Capability, Low VF • This is a Pb−Free and Halid Free Device MARKING DIAGRAM AYWW XXXXG G Applications: • • • • Low Voltage High−Frequency Inverters Free Wheeling Polarity Protection XXXX A Y WW G = Specific Device Code = Assembly Location = Year = Work Week = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Part Number Device Code Marking Package Shipping† SS23 SS23 3000 / Tape & Reel SS24 SS24 SMB (Pb−Free) SS25 SS25 SS26 SS26 SS28 SS28 SS29 SS29 S210 S210 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2001 May, 2022 − Rev. 2 1 Publication Order Number: SS29/D SS23, SS24, SS25, SS26, SS28, SS29, S210 MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Value Symbol SS23 SS24 SS25 SS26 SS28 SS29 S210 Unit Maximum Repetitive Reverse Voltage VRRM 30 40 50 60 80 90 100 V Maximum Average Forward Current: 0.375−inch Lead Length at TA = 75°C IF(AV) 2.0 A Non−Repetitive Peak Forward Surge Current: 8.3 ms Single Half−Sine Wave IFSM 50 A Storage Temperature Range TSTG −65 to +150 °C TJ −65 to +125 °C Rating Operating Junction Temperature Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Characteristic Symbol Value Unit PD 1.3 W RqJA 75 °C/W Power Dissipation Thermal Resistance, Junction to Ambient (Note 1) 1. Device mounted on FE−4 PCB 0.013 mm. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Value Symbol Rating Test Conditions SS23 SS24 500 SS25 SS26 VF Forward Voltage IF = 2.0 A 700 IR Reverse Current at Rated VR TA = 25°C 0.4 TA = 100°C 10 SS28 SS29 850 S210 Unit mV mA Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. www.onsemi.com 2 SS23, SS24, SS25, SS26, SS28, SS29, S210 50 2 IF, FORWARD CURRENT (A) IF, AVERAGE RECTIFIED FORWARD CURRENT (A) TYPICAL CHARACTERISTICS 1.5 1 0.5 0 50 60 70 80 90 20 10 SS23−24 5 1 0.1 0.2 100 110 120 130 140 150 0.3 0.4 Figure 1. Forward Current Derating Curve CT, TOTAL CAPACITANCE (pF) IR, REVERSE CURRENT (mA) 0.8 0.9 1 1.1 500 SS23−24 1 0.1 0.01 0 20 40 60 80 100 120 140 SS23−24 200 100 50 20 10 0.1 VR, REVERSE VOLTAGE (V) 50 40 30 20 10 2 5 10 20 1 5 10 20 Figure 4. Total Capacitance 60 1 0.5 VR, REVERSE VOLTAGE (V) Figure 3. Reverse Current vs. Reverse Voltage IFSM, PEAK FORWARD SURGE CURRENT (A) 0.7 Figure 2. Forward Current Characteristics 10 0 0.6 VF, FORWARD VOLTAGE (V) LEAD TEMPERATURE (°C) 0.001 0.5 50 100 NUMBER OF CYCLES AT 60 Hz Figure 5. Non−Repetitive Surge Current www.onsemi.com 3 50 100 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SMB CASE 403AF ISSUE O B 5.60 5.08 B M 0.13 DATE 31 AUG 2016 CBA 2.50 3.95 3.30 2.20 1.91 B B A 2.20 4.70 4.75 4.05 LAND PATTERN RECOMMENDATION 8° 0° 2.65 MAX A R0.15 4X 2.45 1.90 GAUGE PLANE 0.45 B C 0.30 0.05 0.203 0.050 2.15 1.65 0.13 M CBA 0.41 0.15 0 − 8° 1.60 0.75 DETAIL A SCALE 20 : 1 NOTES: A. EXCEPT WHERE NOTED CONFORMS TO JEDEC DO214 VARIATION AA. B DOES NOT COMPLY JEDEC STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5−1994. F. LAND PATTERN STD. DIOM5336X240M. DOCUMENT NUMBER: DESCRIPTION: 98AON13441G SMB Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative