SURA8260T3G-VF01

DATA SHEET www.onsemi.com Power Rectifier, Ultra-Fast Recovery ULTRAFAST RECTIFIER 2 AMPERES, 600 VOLTS MURA260T3, SURA8260 Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system. SMA CASE 403D Features • • • • • • Small Compact Surface Mountable Package with J−Bend Leads Rectangular Package for Automated Handling High Temperature Glass Passivated Junction Low Forward Voltage Drop (1.2 V Max @ 2.0 A, TJ = 150°C) SURA8 Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable* These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 70 mg (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Polarity: Polarity Band Indicates Cathode Lead ESD Protection: ♦ Human Body Model > 4000 V (Class 3) ♦ Charged Device Model > 1000 V MARKING DIAGRAM U5J AYWW G U5J A Y WW G = = = = = Device Code Assembly Location** Year Work Week Pb−Free Package ** The Assembly Location Code (A) is front side optional. In cases where the Assembly Location is stamped in the package bottom (molding ejecter pin), the front side assembly code may be blank. ORDERING INFORMATION Device Package Shipping† MURA260T3G, SURA8260T3G*, SURA8260T3G−VF01* SURA8260T3G−GA01* SMA (Pb−Free) 5,000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2012 August, 2023 − Rev. 9 1 Publication Order Number: MURA260T3/D MURA260T3, SURA8260 MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 600 V Average Rectified Forward Current @ TL = 145°C @ TL = 110°C IF(AV) Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM Operating Junction and Storage Temperature Range TJ, TSTG 1.0 2.0 30 −65 to +175 A A °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction−to−Lead (TL = 25°C) (Note 1) Thermal Resistance, Junction−to−Ambient (Note 1) Symbol Value Unit PsiJL (Note 2) RqJA 24 °C/W 216 1. Rating applies when surface mounted on the minimum pad size recommended, PC Board FR−4. 2. In compliance with JEDEC 51, these values (historically represented by RqJL) are now referenced as PsiJL. ELECTRICAL CHARACTERISTICS Characteristic Symbol Maximum Instantaneous Forward Voltage (Note 3) (iF = 2.0 A, TJ = 25°C) (iF = 2.0 A, TJ = 150°C) vF Maximum Instantaneous Reverse Current (Note 3) (Rated DC Voltage, TJ = 25°C) (Rated DC Voltage, TJ = 150°C) iR Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/ms) trr 3. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. www.onsemi.com 2 Max 1.45 1.20 5.0 150 75 Unit V mA ns MURA260T3, SURA8260 IR, REVERSE CURRENT (mA) 10 TJ = 100°C 1 0.1 0.01 IF, INSTANTANEOUS FORWARD CURRENT (A) 1000 TJ = 175°C TJ = 25°C 0 100 300 200 400 500 TJ = 25°C 0 100 200 300 400 500 VR, REVERSE VOLTAGE (VOLTS) Figure 1. Typical Reverse Current Figure 2. Maximum Reverse Current 100°C TC = 175°C 25°C 1 0.1 0.3 TJ = 100°C 10 VR, REVERSE VOLTAGE (VOLTS) 10 0.01 TJ = 175°C 100 1 600 0.5 0.7 0.9 1.1 1.3 1.5 1.7 IF, INSTANTANEOUS FORWARD CURRENT (A) IR, REVERSE CURRENT (mA) 100 10 TC = 175°C 100°C 25°C 1 0.1 0.01 0.3 VF, INSTANTANEOUS VOLTAGE (VOLTS) 0.5 0.7 0.9 1.1 1.3 1.5 1.7 VF, INSTANTANEOUS VOLTAGE (VOLTS) Figure 4. Maximum Forward Voltage Figure 3. Typical Forward Voltage www.onsemi.com 3 600 1.9 MURA260T3, SURA8260 30 C, CAPACITANCE (pF) 20 15 10 5 0 IF(AV), AVERAGE FORWARD CURRENT (A) NOTE: TYPICAL CAPACITANCE AT 0 V = 24 pF 4 0 12 8 20 16 28 24 36 32 20 15 10 0 40 SQUARE WAVE 2 1 100 120 140 180 160 28 32 dc 3.5 SQUARE WAVE 2 1.5 1 0.5 1 1.5 2 2.5 36 40 160 180 0.8 0.7 0.6 SQUARE WAVE 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 120 140 Figure 8. Current Derating, Ambient (FR−4 Board with Minimum Pad) 3 3.5 IF(AV), AVERAGE FORWARD CURRENT (AMPS) IFSM, NON−REPETITIVE SURGE CURRENT (A) PF, AVERAGE POWER DISSIPATION (W) 4 0.5 24 TA, AMBIENT TEMPERATURE (°C) 4.5 0 20 dc 0.9 Figure 7. Current Derating, Lead 0 16 1 TL, LEAD TEMPERATURE (°C) 2.5 12 Figure 6. Maximum Capacitance dc 3 8 Figure 5. Typical Capacitance 3 80 4 VR, REVERSE VOLTAGE (VOLTS) 4 60 0 VR, REVERSE VOLTAGE (VOLTS) 5 0 NOTE: MAXIMUM CAPACITANCE AT 0 V = 27 pF 25 5 IF(AV), AVERAGE FORWARD CURRENT (A) C, CAPACITANCE (pF) 25 Figure 9. Power Dissipation 250 200 150 100 50 0 10 100 1000 TP, SQUARE WAVE PULSE DURATION (ms) Figure 10. Typical Non−Repetitive Surge Current www.onsemi.com 4 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS STYLE 1 SMA CASE 403D ISSUE J STYLE 2 SCALE 1:1 STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE DATE 22 OCT 2021 STYLE 2: NO POLARITY GENERIC MARKING DIAGRAM* xxxx AYWWG STYLE 1 xxxx A Y WW G xxxx AYWWG STYLE 2 = Specific Device Code = Assembly Location = Year = Work Week = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “G”, may or may not be present. Some products may not follow the Generic Marking. DOCUMENT NUMBER: DESCRIPTION: 98AON04079D SMA Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com  ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales