MMSZ4xxxET1G Series,
SZMMSZ4xxxET1G Series
Zener Voltage Regulators
500 mW SOD−123 Surface Mount
Three complete series of Zener diodes are offered in the convenient,
surface mount plastic SOD−123 package. These devices provide a
convenient alternative to the leadless 34−package style.
http://onsemi.com
Features
500 mW Rating on FR−4 or FR−5 Board
Wide Zener Reverse Voltage Range − 1.8 V to 43 V
Package Designed for Optimal Automated Board Assembly
Small Package Size for High Density Applications
ESD Rating of Class 3 (> 16 kV) per Human Body Model
Peak Power − 225 W (8 x 20 ms)
AEC−Q101 Qualified and PPAP Capable
SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements
Pb−Free Packages are Available*
SOD−123
CASE 425
STYLE 1
1
Cathode
MARKING DIAGRAM
Mechanical Characteristics:
CASE: Void-free, transfer-molded, thermosetting plastic case
FINISH: Corrosion resistant finish, easily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
260C for 10 Seconds
xxx M G
G
(Note: Microdot may be in either location)
MAXIMUM RATINGS
Symbol
Max
Unit
Peak Power Dissipation @ 20 ms (Note 1)
@ TL 25C
Ppk
225
W
Total Power Dissipation on FR−5 Board,
(Note 2) @ TL = 75C
Derated above 75C
PD
500
6.7
mW
mW/C
Thermal Resistance, (Note 3)
Junction−to−Ambient
RqJA
Thermal Resistance, (Note 3)
Junction−to−Lead
RqJL
Junction and Storage Temperature Range
1
xxx = Device Code (Refer to page 2)
M
= Date Code
G
= Pb−Free Package
POLARITY: Cathode indicated by polarity band
FLAMMABILITY RATING: UL 94 V−0
Rating
2
Anode
TJ, Tstg
ORDERING INFORMATION
Package
Shipping†
MMSZ4xxxET1G
SOD−123
(Pb−Free)
3,000 /
Tape & Reel
SZMMSZ4xxxET1G
SOD−123
(Pb−Free)
3,000 /
Tape & Reel
MMSZ4xxxET3G
SOD−123
(Pb−Free)
10,000 /
Tape & Reel
Device
C/W
340
C/W
150
−55 to
+150
C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Nonrepetitive current pulse per Figure 11.
2. FR−5 = 3.5 x 1.5 inches, using the minimum recommended footprint.
3. Thermal Resistance measurement obtained via infrared Scan Method.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
DEVICE MARKING INFORMATION
See specific marking information in the device marking
column of the Electrical Characteristics table on page 2 of
this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
Semiconductor Components Industries, LLC, 2012
January, 2012 − Rev. 6
1
Publication Order Number:
MMSZ4678ET1/D
MMSZ4xxxET1G Series, SZMMSZ4xxxET1G Series
ELECTRICAL CHARACTERISTICS (TA = 25C unless
I
otherwise noted, VF = 0.95 V Max. @ IF = 10 mA)
Symbol
IF
Parameter
VZ
Reverse Zener Voltage @ IZT
IZT
Reverse Current
IR
Reverse Leakage Current @ VR
VR
Reverse Voltage
IF
Forward Current
VF
Forward Voltage @ IF
VZ VR
V
IR VF
IZT
Zener Voltage Regulator
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA)
Zener Voltage (Note 1)
VZ (V)
Leakage Current
@ IZT
IR @ VR
Device
Marking
Min
Nom
Max
mA
mA
V
MMSZ4680ET1G
CF8
2.09
2.2
2.31
50
4
1
MMSZ4684ET1G
CG3
3.13
3.3
3.47
50
7.5
1.5
MMSZ4688ET1G
CG7
4.47
4.7
4.94
50
10
3
MMSZ4689ET1G
CG8
4.85
5.1
5.36
50
10
3
MMSZ4690ET1G
CG9
5.32
5.6
5.88
50
10
4
MMSZ4691ET1G
CH1
5.89
6.2
6.51
50
10
5
MMSZ4692ET1G
CH2
6.46
6.8
7.14
50
10
5.1
MMSZ4693ET1G
CH3
7.13
7.5
7.88
50
10
5.7
MMSZ4697ET1G
CH7
9.50
10
10.50
50
1
7.6
MMSZ4699ET1G
CH9
11.40
12
12.60
50
0.05
9.1
MMSZ4701ET1G
CJ2
13.3
14
14.7
50
0.05
10.6
MMSZ4702ET1G
CJ3
14.25
15
15.75
50
0.05
11.4
MMSZ4703ET1G
CJ4
15.20
16
16.80
50
0.05
12.1
MMSZ4705ET1G
CJ6
17.10
18
18.90
50
0.05
13.6
MMSZ4709ET1G
CK1
22.80
24
25.20
50
0.01
18.2
MMSZ4711ET1G
CK3
25.65
27
28.35
50
0.01
20.4
MMSZ4717ET1G
CK9
40.85
43
45.15
50
0.01
32.6
Device*
1. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30C 1C.
*Include SZ-prefix devices where applicable.
http://onsemi.com
2
MMSZ4xxxET1G Series, SZMMSZ4xxxET1G Series
8
100
7
VZ, TEMPERATURE COEFFICIENT (mV/C)
VZ, TEMPERATURE COEFFICIENT (mV/C)
TYPICAL CHARACTERISTICS
TYPICAL TC VALUES
6
5
4
VZ @ IZT
3
2
1
0
−1
−2
−3
2
3
4
5
6
7
8
9
10
11
10
10
VZ, NOMINAL ZENER VOLTAGE (V)
Figure 1. Temperature Coefficients
(Temperature Range − 55C to +150C)
Figure 2. Temperature Coefficients
(Temperature Range − 55C to +150C)
1000
1.0
PD versus TL
0.8
0.6
100
PD versus TA
0.4
0.2
0
25
50
75
100
T, TEMPERATURE (C)
RECTANGULAR
WAVEFORM, TA = 25C
125
10
1
150
0.1
Figure 3. Steady State Power Derating
1
1000
1000
TJ = 25C
IZ(AC) = 0.1 IZ(DC)
f = 1 kHz
IF, FORWARD CURRENT (mA)
IZ = 1 mA
100
75 V (MMSZ5267BT1G)
91 V (MMSZ5270BT1G)
100
5 mA
20 mA
10
10
150C
1
10
100
PW, PULSE WIDTH (ms)
Figure 4. Maximum Nonrepetitive Surge Power
1000
Z ZT, DYNAMIC IMPEDANCE ( )
100
VZ, NOMINAL ZENER VOLTAGE (V)
Ppk , PEAK SURGE POWER (WATTS)
PD, POWER DISSIPATION (WATTS)
VZ @ IZT
1
12
1.2
0
TYPICAL TC VALUES
1
10
VZ, NOMINAL ZENER VOLTAGE
100
1
0.4
Figure 5. Effect of Zener Voltage on
Zener Impedance
0.5
75C 25C
0C
0.6
0.7
0.8
0.9
1.0
VF, FORWARD VOLTAGE (V)
Figure 6. Typical Forward Voltage
http://onsemi.com
3
1.1
1.2
MMSZ4xxxET1G Series, SZMMSZ4xxxET1G Series
TYPICAL CHARACTERISTICS
1000
1000
C, CAPACITANCE (pF)
0 V BIAS
1 V BIAS
I R , LEAKAGE CURRENT ( m A)
TA = 25C
100
BIAS AT
50% OF VZ NOM
10
1
1
10
VZ, NOMINAL ZENER VOLTAGE (V)
100
100
10
1
+150C
0.1
0.01
0.001
+ 25C
0.0001
−55C
0.00001
0
10
Figure 7. Typical Capacitance
Figure 8. Typical Leakage Current
I Z, ZENER CURRENT (mA)
TA = 25C
10
1
0.1
0
2
4
6
8
VZ, ZENER VOLTAGE (V)
10
TA = 25C
10
1
0.1
0.01
12
100
30
50
70
VZ, ZENER VOLTAGE (V)
PEAK VALUE IRSM @ 8 ms
tr
90
10
PULSE WIDTH (tP) IS DEFINED
AS THAT POINT WHERE THE
PEAK CURRENT DECAY = 8 ms
80
70
60
50
HALF VALUE IRSM/2 @ 20 ms
40
30
tP
20
10
0
0
90
Figure 10. Zener Voltage versus Zener Current
(12 V to 91 V)
Figure 9. Zener Voltage versus Zener Current
(VZ Up to 12 V)
% OF PEAK PULSE CURRENT
I Z, ZENER CURRENT (mA)
80
100
100
0.01
20
30
40
50
60
70
VZ, NOMINAL ZENER VOLTAGE (V)
20
40
60
t, TIME (ms)
Figure 11. 8 20 ms Pulse Waveform
http://onsemi.com
4
80
90
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOD−123
CASE 425−04
ISSUE G
DATE 07 OCT 2009
SCALE 5:1
D
A
ÂÂÂÂ
ÂÂÂÂ
ÂÂÂÂ
A1
1
HE
DIM
A
A1
b
c
D
E
HE
L
q
E
2
q
L
b
C
ÉÉÉ
ÉÉÉ
ÉÉÉ
2.36
0.093
4.19
0.165
ÉÉÉ
ÉÉÉ
ÉÉÉ
MILLIMETERS
MIN
NOM
MAX
0.94
1.17
1.35
0.00
0.05
0.10
0.51
0.61
0.71
----0.15
1.40
1.60
1.80
2.54
2.69
2.84
3.56
3.68
3.86
----0.25
--10 °
0°
MIN
0.037
0.000
0.020
--0.055
0.100
0.140
0.010
0°
INCHES
NOM
0.046
0.002
0.024
--0.063
0.106
0.145
-----
MAX
0.053
0.004
0.028
0.006
0.071
0.112
0.152
--10 °
GENERIC
MARKING DIAGRAM*
1
SOLDERING FOOTPRINT*
0.91
0.036
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
XXXMG
G
XXX = Specific Device Code
M
= Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
1.22
0.048
*This information is generic. Please refer to device data
sheet for actual part marking. Pb−Free indicator, “G” or
microdot “ G”, may or may not be present.
STYLE 1:
PIN 1. CATHODE
2. ANODE
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DOCUMENT NUMBER:
DESCRIPTION:
98ASB42927B
SOD−123
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative