TIG074E8-TL-H

Ordering number : ENA2209 TIG074E8 N-Channel IGBT http://onsemi.com 400V, 150A, VCE(sat); 3.8V Single ECH8 Features • • • • Low-saturation voltage Enhansment type Mounting Height 0.9mm, Mounting Area 8.12mm2 Halogen free compliance Low voltage drive (2.5V) Built-in Gate to Emitter protection diode dv / dt guarantee* • • • Application • Light-Controlling Flash Applications Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector to Emitter Voltage Gate to Emitter Voltage (DC) Gate to Emitter Voltage (Pulse) Symbol Maximum Collector to Emitter dv / dt VGES ICP dv / dt Channel Temperature Tj Storage Temperature Tstg Collector Current (Pulse) Conditions P-channel VCES VGES PW≤1ms VGE=2.5V, CM=200μF Turn off Ic=150A, VCE≤320V, starting Tch=25°C Unit 400 V ±4 V ±5 V 150 A 400 V / μs 150 °C -40 to +150 °C * : Concerning dv / dt (slope of Collector Voltage at the time of Turn-OFF), will be 100% screen-detected in the circuit shown as Fig. 1. Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Electrical Characteristics at Ta=25°C Parameter Collector to Emitter Breakdown Voltage Collector to Emitter Cutoff Current Gate to Emitter Leakage Current Gate to Emitter Threshold Voltage Collector to Emitter Saturation Voltage Symbol V(BR)CES ICES IGES VGE(off) Conditions IC=2mA, VGE=0V Ratings min typ max 400 V VCE=320V, VGE=0V VGE=±4V, VCE=0V VCE=10V, IC=1mA IC=100A, VGE=2.5V Input Capacitance VCE(sat) Cies Output Capacitance Coes VCE=10V, f=1MHz Reverse Transfer Capacitance Cres Unit 0.4 3.8 10 μA ±10 μA 0.9 V 5.4 V 3100 pF 32 pF 24 pF ORDERING INFORMATION See detailed ordering and shipping information on page 5 of this data sheet. Semiconductor Components Industries, LLC, 2013 September, 2013 91813 TKIM TC-00003013 No. A2209-1/6 TIG074E8 100 1.8V 75 50 4 5 6 7 8 9 VCE -- VGE 7 6 5 130A 4 100A 3 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Gate to Emitter Voltage, VGE -- V 7 6 IC=150A 130A 5 100A 4 3 2 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Gate to Emitter Voltage, VGE -- V 0.8 0.6 0.5 0.4 0.3 0.2 0.1 0 --50 --25 0 25 50 75 100 Case Temperature, Tc -- °C C 7 6 5 IC=150A 130A 4 100A 3 1.5 2.0 125 150 IT15160 2.5 3.0 3.5 4.0 4.5 VCE(sat) -- Tc 5.0 IT15157 9 8 7 0A 13 6 0A 10 5 4 3 2 --50 --25 0 25 50 75 100 125 Case Temperature, Tc -- °C IT15158 0.7 4.0 IT15155 VGE=2.5V 5.0 VCE=10V IC=1mA 3.5 8 10 VGE(off) -- Tc 0.9 3.0 Gate to Emitter Voltage, VGE -- V Tc= 75°C 8 2.5 Tc=25°C 2 1.0 5.0 9 2.0 9 IT15156 VCE -- VGE 10 1.5 VCE -- VGE 10 Collector to Emitter Voltage, VCE -- V 8 1.0 Gate to Emitter Voltage, VGE -- V Tc= --25°C IC=150A 0.5 0 IT15154 9 2 1.0 0 10 A 3 Collector to Emitter Saturation Voltage, VCE(sat) -- V Collector to Emitter Voltage, VCE -- V 50 50 2 10 Collector to Emitter Voltage, VCE -- V 75 IC =1 1 180 Collector Current (Pulse), ICP -- A 0 Collector to Emitter Voltage, VCE -- V Gate to Emitter Cutoff Voltage, VGE(off) -- V 100 25 25 0 Tc= Collector Current, IC -- A 0V 125 25° C V --25 ° 3.0 V VCE=10V 2.5 V GE = 4. Collector Current, IC -- A 125 IC -- VGE 150 Tc=25°C 75 ° C IC -- VCE 150 160 150 IT15159 ICP -- VGE VCE=320V CM=100μF Tc=25°C 140 Tc=70°C 120 100 80 60 40 20 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Gate to Emitter Voltage, VGE -- V 5.0 5.5 IT15165 No. A2209-2/6 TIG074E8 CM -- ICP 450 VGE=2.5V VCE=320V Main Capacitance, CM -- μF 400 350 Tc=70°C 300 Tc=25°C 250 200 150 100 50 0 0 20 40 60 80 100 120 Collector Current (Pulse), ICP -- A 140 160 IT17156 Fig.1 Large Current R Load Switching Circuit RL CM + VCC RG TIG074E8 VGE 100kΩ Note1. The collector voltage gradient dv / dt - Turn off Ic safety movement domain to protect the device of Gate-series resistor RG when it is turned off. No. A2209-3/6 TIG074E8 Definition of dv/dt dv/dt is defined as the maximum slope of the below VCE curve during turn-off period. dv/dt=ΔVCE/Δt=ΔVCE/100ns Overall waveform Enlarged picture of turn-off period Turn-off period V,I VCE Turn off VCE Δt=100ns IC ICP ΔVCE Turn off IC IC t VCE IT15323 Definition of Switching Time VGE VGE:90% VGE:10% t VCE VCE:90% VCE:10% VCE:10% t IC td(on) tr td(off) IC:90% IC:10% t tf IT15324 No. A2209-4/6 TIG074E8 Package Dimensions TIG074E8-TL-H SOT-28FL/ECH8 CASE 318BF ISSUE O Unit : mm 1: Emitter 2: Emitter 3: Emitter 4: Gate 5: Collector 6: Collector 7: Collector 8: Collector Land Pattern Example 2.8 0.6 0.4 0.65 Ordering & Package Information Device Package Shipping memo TIG074E8-TL-H ECH8 3,000 pcs./reel Pb-Free and Halogen Free Packing Type: TL Marking ZF LOT No. TL Electrical Connection 8 7 6 5 1 2 3 4 No. A2209-5/6 TIG074E8 Note on usage : TIG074E8 has protection diode between gate and emitter but handling it requires sufficient care to be taken. ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A2209-6/6