TL331SN4T3G

TL331, TL331V Comparator, Single Channel, Open Collector, Low Power, Wide Supply Range Description The TL331 is an open collector, low−power comparator designed specifically to operate over a wide supply range from 2 V to 36 V single supply and ±1 V to ±18 V for split supplies. The input common−mode voltage range includes ground, even when operated from a single power supply voltage. TL331 comes in a space saving TSOP−5 package and is also available in an automotive qualified version. www.onsemi.com 5 1 TSOP−5 SN SUFFIX CASE 483 Features • • • • • • • • • • • Wide Single Supply Voltage Range or Dual Supplies Low Supply Current: 0.5 mA Typical Low Input Bias Current: 25 nA Typical Low Input Offset Current: ±5 nA Typical Low Input Offset Voltage: ±2 mV Typical Input Common Mode Voltage Range includes Ground Low Output Saturation Voltage: 150 mV Typ at IO = 4 mA Differential Input Voltage Range Equal to the Supply Voltage TTL, DTL, ECL, CMOS Compatible Devices TL331V for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable* These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant VCC MARKING DIAGRAM 5 TL3AYWG G 1 TL3 A Y W G = Specific Device Code = Assembly Location = Year = Work Week = Pb−Free Package (Note: Microdot may be in either location) PIN CONNECTIONS IN− 1 VEE 2 IN+ 3 5 VCC 4 OUT ORDERING INFORMATION Package Shipping† TL331SN4T3G TSOP−5 (Pb−Free) 3000 / Tape & Reel TL331VSN4T3G* TSOP−5 (Pb−Free) 3000 / Tape & Reel Device IN+ Vout VEE VEE IN− VEE © Semiconductor Components Industries, LLC, 2017 May, 2018 − Rev. 2 1 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Publication Order Number: TL331/D TL331, TL331V Table 1. MAXIMUM RATINGS (Over operating free−air temperature, unless otherwise stated) Symbol Limit Unit VS 36 V Input Voltage (Note 1) VIN ±36 V Differential Input Voltage (Note 1) VID −0.3 to 36 V ISC 20 mA Storage Temperature TSTG −65 to +150 °C Junction Temperature TJ +150 °C Human Body Model HBM 2000 V Charged Device Model CDM 2500 V MM 150 V Parameter Supply Voltage (VCC − VEE) INPUT AND OUTPUT PINS Output Short Circuit Current (Note 2) TEMPERATURE ESD RATINGS Machine Model Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Positive excursions of the input voltage may exceed the power supply level. The low input voltage state must not be less than 0.3 V below the negative supply rail. 2. Short circuits from the output to VCC can cause excessive heating and potential destruction. The maximum short circuit current is independent of the magnitude of VCC. Table 2. THERMAL INFORMATION (Note 3) Parameter Junction to Ambient Thermal Resistance Symbol Single Layer Board (Note 4) Multi−Layer Board (Note 5) Unit qJA 274 209 °C/W 3. Short−circuits can cause excessive heating and destructive dissipation. These values are typical. 4. Values based on a 1S standard PCB according to JEDEC 51−3 with 1.0 oz copper and a 400 mm2 copper area 5. Values based on a 1S2P standard PCB according to JEDEC 51−7 with 1.0 oz copper and a 25 mm2 copper area Table 3. OPERATING CONDITIONS Symbol Limit Unit Operating Supply Voltage Parameter VS 2 to 36 V Specified Operating Range TA −40 to +125 °C Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. www.onsemi.com 2 TL331, TL331V Table 4. ELECTRICAL CHARACTERISTICS (Vs=+5.0 V, At TA = +25°C, VCM = mid−supply, unless otherwise noted) Boldface limits apply over the specified temperature range, TA = –40°C to +125°C. Parameter Symbol Test Conditions Min Typ Max Unit 1 5 mV 9 mV −250 nA −400 nA 50 nA 150 nA VCC – 1.5 V VCC V 400 mV 700 mV INPUT CHARACTERISTICS Input Offset Voltage Input Bias Current Input Offset Current Input Common Mode Range (Note 6) Differential Input Voltage (Note 7) VOS Vo = 1.4 V, RS = 0 W, VS = 5 V to 30 V VCM = 0 to VCC −1.5 V VCM = 0 to VCC −2 V IIB −25 IOS 5 VICMR 0 VID OUTPUT CHARACTERISTICS Output Voltage Low VOL VID = −1 V, IO = 4 mA Output Sink Current IO VID = −1 V, VO = 1.5 V Output Leakage Current IOH VID = 1 V, VCC = VO = 5 V 150 6 16 0.1 VID = 1 V, VCC = VO = 30 V mA 50 nA 1 mA DYNAMIC PERFORMANCE Large Signal Differential Voltage Gain AVD VCC = 15 V, RPU = 15 kW, VO = 1.4 V to 11.4 V Propagation Delay L−H (Note 8) tPLH Propagation Delay H−L tPHL 50 200 V/mV 5 mV overdrive, RPU = 5.1 kW 850 ns 20 mV overdrive, RPU = 5.1 kW 600 ns 100 mV overdrive, RPU = 5.1 kW 400 ns TTL Input, Vref = +1.4 V, RPU = 5.1 kW 300 ns 5 mV overdrive, RPU = 5.1 kW 700 ns 20 mV overdrive, RPU = 5.1 kW 400 ns 100 mV overdrive, RPU = 5.1 kW 250 ns TTL Input, Vref = +1.4 V, RPU = 5.1 kW 300 ns No load, VCC = 5 V 0.5 0.7 mA No load, VCC = 30 V 0.6 1.25 mA POWER SUPPLY Quiescent Current ICC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 6. The input common mode voltage of either input signal should not be allowed to go negative by more than 0.3 V. The upper end of the common mode voltage range is VCC – 1.5 V, but either or both inputs can go to +36 V without damage. 7. Positive excursions of the input voltage may exceed the power supply level. As long as the other voltage remains within the common mode range, the comparator will provide a proper output stage. The low input voltage state must not be less than 0.3 V below the negative supply rail. 8. TL331 is an open collector comparator. Rise time is a function of the RC time constant. A 5.1 kW pull−up resistor was used for these measurements. www.onsemi.com 3 TL331, TL331V TYPICAL CHARACTERISTICS 0.15 VS = 2 V RPU = 5.1 k CL = 15 pF TA = 25°C 0.10 1.5 0.10 0 0.5 Input 5 mV 20 mV 100 mV −0.05 −0.10 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.5 VS = 2 V RPU = 5.1 k CL = 15 pF TA = 25°C 0 0 −0.10 −1.0 1.6 −0.15 −0.2 0 0.2 VS = 5 V RPU = 5.1 k CL = 15 pF TA = 25°C 0.6 Input 5 mV 20 mV 100 mV −0.05 3 0.15 2 0.10 1 0.05 0 INPUT (V) 0 3 2 VS = 5 V RPU = 5.1 k CL = 15 pF TA = 25°C 0 −2 −0.10 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1 0 Input 5 mV −1 20 mV 100 mV −2 −1 −0.05 −0.10 0 −1.0 1.0 0.8 −3 −0.15 −0.2 1.6 TIME (ms) 0 0.2 0.4 0.6 0.8 −3 1.0 TIME (ms) Figure 3. Low−to−High Propagation Delay vs. Overdrive at 5 V Supply Figure 4. High−to−Low Propagation Delay vs. Overdrive at 5 V Supply www.onsemi.com 4 OUTPUT (V) INPUT (V) 0.4 Figure 2. High−to−Low Propagation Delay vs. Overdrive at 2 V Supply OUTPUT (V) 0.05 −0.15 −0.2 −0.5 TIME (ms) Figure 1. Low−to−High Propagation Delay vs. Overdrive at 2 V Supply 0.10 0.5 Input 5 mV 20 mV 100 mV TIME (ms) 0.15 1.0 −0.05 −0.5 −0.15 −0.2 2.0 0.05 INPUT (V) 1.0 OUTPUT (V) INPUT (V) 0.15 OUTPUT (V) 0.05 2.0 TL331, TL331V TYPICAL CHARACTERISTICS 0.10 INPUT (V) 0 14 0.10 7 0 Input 5 mV 20 mV 100 mV −0.05 21 14 Input 5 mV 20 mV 100 mV 0.05 0 0 VS = 36 V RPU = 5.1 k CL = 15 pF TA = 25°C −7 −0.05 −0.10 −14 −0.10 −0.15 −0.2 0 0.2 0.4 0.6 0.8 1.2 1.0 1.4 7 OUTPUT (V) 0.05 0.15 OUTPUT (V) VS = 36 V RPU = 5.1 k CL = 15 pF TA = 25°C 21 INPUT (V) 0.15 −7 −14 −21 −0.15 −0.2 1.6 0 0.2 TIME (ms) 0.4 0.6 0.8 −21 1.0 TIME (ms) Figure 5. Low−to−High Propagation Delay vs. Overdrive at 36 V Supply Figure 6. High−to−Low Propagation Delay vs. Overdrive at 36 V Supply 1.0 10 0.8 Vs = 36 V 1 VOL − VEE (V) SUPPLY CURRENT (mA) Vs = 5 V Vs = 5 V 0.6 Vs = 2 V 0.4 TA = 25°C TA = 125°C 0.1 TA = −40°C 0.01 0.2 0 −40 0.001 −20 0 20 40 60 80 100 120 0.01 TEMPERATURE (°C) 0.1 1 10 OUTPUT CURRENT (mA) Figure 7. Quiescent Current vs. Temperature Figure 8. Low Level Output Voltage vs. Output Current at 5 V Supply www.onsemi.com 5 100 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TSOP−5 CASE 483 ISSUE N 5 1 SCALE 2:1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.15 PER SIDE. DIMENSION A. 5. OPTIONAL CONSTRUCTION: AN ADDITIONAL TRIMMED LEAD IS ALLOWED IN THIS LOCATION. TRIMMED LEAD NOT TO EXTEND MORE THAN 0.2 FROM BODY. D 5X NOTE 5 2X DATE 12 AUG 2020 0.20 C A B 0.10 T M 2X 0.20 T 5 B 1 4 2 B S 3 K DETAIL Z G A A TOP VIEW DIM A B C D G H J K M S DETAIL Z J C 0.05 H C SIDE VIEW SEATING PLANE END VIEW GENERIC MARKING DIAGRAM* SOLDERING FOOTPRINT* 0.95 0.037 MILLIMETERS MIN MAX 2.85 3.15 1.35 1.65 0.90 1.10 0.25 0.50 0.95 BSC 0.01 0.10 0.10 0.26 0.20 0.60 0_ 10 _ 2.50 3.00 1.9 0.074 5 5 XXXAYWG G 1 1 Analog 2.4 0.094 XXX = Specific Device Code A = Assembly Location Y = Year W = Work Week G = Pb−Free Package 1.0 0.039 XXX MG G Discrete/Logic XXX = Specific Device Code M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) 0.7 0.028 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: DESCRIPTION: 98ARB18753C TSOP−5 *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative