UD1006FR-H

Ordering number : ENA1745A UD1006FR Planar Ultrafast Rectifier http://onsemi.com Low VF type, 10A, 600V, 1.3V, TO-220F-2FS Features • • VRRM=600V trr=60ns(typ) (IF=0.5A, IR=1A) • • VF=1.3V max (IF=10A) Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage Conditions Ratings VRRM VRSM Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current IO IF(RMS) IFSM Junction Temperature Tj Storage Temperature Tstg R.M.S Forward Current Unit 600 50Hz resistive load, Sine wave Tc=79°C Tc=25°C (SANYO’s ideal heat dissipation condition) Package limited Sine wave 10ms 1pulse V 600 V 10 A 18 A 120 A 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7532-001 • Package : TO-220F-2FS • JEITA, JEDEC : SC-67 • Minimum Packing Quantity : 50pcs./magazine UD1006FR-H 4.7 10.16 3.18 Marking 3.23 15.8 15.87 6.68 3.3 2.54 UD1006 FR LOT No. 1.28 2.76 1.47 MAX 0.8 1 12.98 0.8 MAX * 2 0.5 part is not a metal * : This but a resin Electrical Connection 2 5.08 1 : Cathode 2 : Anode TO-220F-2FS Semiconductor Components Industries, LLC, 2013 September, 2013 1 91212 TKIM/51910SA TKIM TC-00002308 No.A1745-1/5 UD1006FR Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR VF IR Forward Voltage Reverse Current Reverse Recovery Time Thermal Resistance Ratings Conditions min IR=1mA IF=10A typ Unit max 600 V 1.1 trr1 VR=600V IF=10A, di / dt=100A/μs trr2 Rth(j-c) IF=0.5A, IR=1A Junction -Case : Smoothed DC 100 1.3 V 100 μA 150 ns 4.9 °C / W 60 ns Ordering Information Device UD1006FR-H Shipping memo 50pcs./magazine Pb Free and Halogen Free IF -- VF 5 3 2 7 50°C Capacitance, Cob -- pF C Forward Voltage, VF -- V IFSM -- t Surge Forward Current, IFSM(Peak) -- A 120 IS 20ms t 110 100 90 80 70 2 3 5 7 0.1 2 100 2 3 Time, t -- s 5 7 1.0 2 3 IT14893 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 IT14892 Reverse Voltage, VR -- V IT14891 Current waveform 50Hz sine wave 60 0.01 3 5 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 130 5 7 Transient Thermal Resistance Rth(j-c) -- °C / W 0 --40° 5°C 75° C 0.1 7 5 3 2 25°C 1.0 7 5 3 2 0.01 7 5 3 2 0.001 Cob -- VR 1000 10 7 5 3 2 Ta= 12 Forward Current, IF -- A Package TO-220F-2FS 7 Rth(j-c) -- t 5 3 2 1.0 7 5 3 0.001 2 3 5 70.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 Time, t -- s 2 3 5 IT14894 No.A1745-2/5 UD1006FR Magazine Specification UD1006FR-H No.A1745-3/5 UD1006FR Outline Drawing UD1006FR-H Mass (g) Unit 1.8 mm * For reference No.A1745-4/5 UD1006FR ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.A1745-5/5