UF4004

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. UF4001 - UF4007 Fast Rectifiers Features • • • • • Low Forward Voltage Drop High Surge Current Capability High Reliability High Current Capability Glass-Passivated Junction DO-41 (Plastic) COLOR BAND DENOTES CATHODE Ordering Information Part Number Top Mark Package Packing Method UF4001 UF4001 DO-204AL (DO-41) Tape and Reel UF4002 UF4002 DO-204AL (DO-41) Tape and Reel UF4003 UF4003 DO-204AL (DO-41) Tape and Reel UF4004 UF4004 DO-204AL (DO-41) Tape and Reel UF4005 UF4005 DO-204AL (DO-41) Tape and Reel UF4006 UF4006 DO-204AL (DO-41) Tape and Reel UF4007 UF4007 DO-204AL (DO-41) Tape and Reel Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Value Symbol Parameter UF 4001 UF 4002 UF 4003 UF 4004 UF 4005 UF 4006 UF 4007 Unit 50 100 200 400 600 800 1000 V VRRM Maximum Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current .375 " Lead Length at TA = 75C 1.0 A IFSM Non-Repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave 30 A TSTG Storage Temperature Range -65 to +150 C Operating Junction Temperature -65 to +150 C TJ © 1999 Fairchild Semiconductor Corporation UF4001 - UF4007 Rev. 1.8 www.fairchildsemi.com UF4001 - UF4007 — Fast Rectifiers August 2016 Values are at TA = 25°C unless otherwise noted. Symbol PD Parameter Value Power Dissipation Unit 2.08 W RJA Thermal Resistance, Junction-to-Ambient 60 C/W RJL Thermal Resistance, Junction-to-Lead 30 C/W Electrical Characteristics Values are at TA = 25°C unless otherwise noted. Value Symbol Parameter Conditions UF 4001 UF 4002 UF 4003 UF 4004 UF 4005 UF 4006 UF 4007 Unit VF Maximum Forward Voltage IF = 1.0 A 1.0 1.7 V trr Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A 50 75 ns IR Maximum Reverse Current at Rated VR CT Maximum Total Capacitance © 1999 Fairchild Semiconductor Corporation UF4001 - UF4007 Rev. 1.8 TA = 25C 10 TA = 100C 50 VR = 4.0 V, f = 1.0 MHz 17 A pF www.fairchildsemi.com 2 UF4001 - UF4007 — Fast Rectifiers Thermal Characteristics 10 1.2 1 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.00mm) LOAD LENGTHS 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 Ambient Temperature [ºC] 1 0.1 100 Reverse Current, IR [mA] 30 20 10 2 5 10 20 50 Number of Cycles at 60Hz UF4004 0.4 0.6 0.8 1 1.2 Forward Voltage, VF [V] 1.4 Figure 2. Forward Characteristics 1000 1 UF4005-UF4007 0.01 40 0 UF4001-UF4003 0.001 0.2 175 Figure 1. Forward Current Derating Curve Peak Forward Surge Current, IFSM [A] TA J = 25º C μS Pulse Width = 300μ 2% Duty Cycle 1.4 Forward Current, IF [A] Average Rectified Forward Current, IF [A] 1.6 TA = 125 º C 10 1 0.1 100 Figure 3. Non-Repetitive Surge Current TA J = 25º C 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage [%] Figure 4. Reverse Characteristics Total Capacitance, CT [pF] 60 50 40 30 UF4001-UF4003 20 UF4004-UF4007 10 0 0.1 0.5 1 2 5 10 20 50 100 Reverse Voltage, V R [V] 500 Figure 5. Typical Junction Capacitance 50Ω NONINDUCTIVE 50Ω NONINDUCTIVE +0.5A trr (-) DUT 50V (approx) 50Ω NONINDUCTIVE 0 Pulse Generator (Note 2) -0.25A (+) OSCILLOSCOPE (Note 1) NOTES: 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms. -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Figure 6. Reverse Recovery Time Characteristic and Test Circuit Diagram © 1999 Fairchild Semiconductor Corporation UF4001 - UF4007 Rev. 1.8 www.fairchildsemi.com 3 UF4001 - UF4007 — Fast Rectifiers Typical Performance Characteristics 7+,6'5$:,1*,67+(3523(57