Fiber Coupled Laser Module (658 nm)
FCLM658 Series
The FCLMTM Laser Module is a temperature stabilized semiconductor laser coupled with single mode fiber. It features very low M2 value Gaussian beam output with excellent beam pointing stability at a wide temperature dynamic range. The unique designed electrical driver enable this optical engine has the lowest power consumptions compare to the similar product in the industry. The FCLMTM Laser Module is a Class III b laser product
Performance Specificationns
Condition Min Typ Max Unit
Optical Performance Wavelength Output Power Noise(RMS) Power Stability Power Stability Polarization Extinction Ratio Collimated Beam Parameters M2 Beam Diameter Beam Divergence Pointing Stability Pointing Stability Fiber Information Length Fiber Type Mode Field Diameter NA Fiber Jacket Diameter Electrical Parameters Power Supply Power Consumption Current(TEC) Current(LD) Temperature Stability Control Power Setting Environmental Conditions Storage Temperature Operation Temperature Operation Humidity Package Dimensions * 0 to + 50 + 10 to + 40 No Condensing 112 x 56 x 26.5 mm °C °C
Note: * The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified.
T= 25°C 25 50 T= 25°C T= 25°C 10~20 MHz 1hrs, T= 25°C 24hrs, T= 25°C 15 25 50
658
nm mW mW
0.1 0.25 0.75
0.3 0.5 1
% % % dB
1.2 1/e2 full angle 2hrs, T= 25°C 0.7, 0.9, 1.5, 2.0, 4.0, 6.0 1 5 1 1, 2, 3 SM / PM 3 0.12 3 9 3 10 2 200 0.2 ACC 0% ~ 100% output power mm um mm mrad urad urad/°C m
Features
Plug & Play ESD Protection Power Adjustable LD Current Full Protection LD Temperature Stabilized Compact Size
Applications
V W A mA °C
Polarization Maintaining Fiber High Speed Modulation Remote Control Collimated & Focused Beam Metal Jacket Protection
R03.20090331
Fiber Coupled Laser Module
FCLM658 Series
Mechanical Drawing / Package Dimensions (dimension in mm)
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200.
FCLM
6
5
8
Wavelength
658 nm= 658
Control Type
Local = L Remote = R
Connector Type
None = 1 FC/PC = 2 FC/APC = 3
Power Output
25mW = 25 50mW = 50
Operation Type
DC = D Modulation = M
Fiber Length Beam Size
0.7mm = 1 0.9mm = 2 1.5mm = 3 2.0mm = 4 4.0mm = 5 6.0mm = 6 None = 0 1 Meter 3mm Cable = 1 3 Meter 3mm Cable = 2 1 Meter Metal Jacket = 3 3 Meter Metal Jacket = 4 2 Meter 3mm Cable = 5 2 Meter Metal Jacket = 6
Fiber Type
Single Mode = S Polarization Maintain = P
This component does not comply with the Federal Regulations (21 CFR Subchapter1 ) as administered by the Center for Devices and Radiological health. Purchaser acknowledges that his/ her products must comply with these regulations before they can be sold to a customer. The output light from this product is harmful to a human body even if it is invisible. Avoid looking at the output of this product directly, or through a lens during operation. Observance of operation should be through a TV camera or related equipment. Refer to IEC 825-1 and 21 CFR 1040.101040.11 as a radiation safety standard for laser products. Oplink follows a policy of continuous product improvement. Specifications are subject to change without prior notice. The module’s warranty is 1 year. R03.20090331
Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules
