FCLM670S5RM5

Fiber Coupled Laser Module (670 nm) FCLM670 Series The FCLMTM Laser Module is a temperature stabilized semiconductor laser coupled with single mode fiber. It features very low M2 value Gaussian beam output with excellent beam pointing stability at a wide temperature dynamic range. The unique designed electrical driver enable this optical engine has the lowest power consumptions compare to the similar product in the industry. The FCLMTM Laser Module is a Class III b laser product Performance Specificationns Condition Min Typ Max Unit Optical Performance Wavelength Output Power Noise(RMS) Power Stability Power Stability Polarization Extinction Ratio Collimated Beam Parameters M2 Beam Diameter Beam Divergence Pointing Stability Pointing Stability Fiber Information Length Fiber Type Mode Field Diameter NA Fiber Jacket Diameter Electrical Parameters Power Supply Power Consumption Current(TEC) Current(LD) Temperature Stability Control Power Setting Environmental Conditions Storage Temperature Operation Temperature Operation Humidity Package Dimensions * 0 to + 50 + 10 to + 40 No Condensing 112 x 56 x 26.5 mm °C °C Note: * The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. T= 25°C T= 25°C 10~20 MHz 1hrs, T= 25°C 24hrs, T= 25°C 15 670 5 0.1 0.25 0.75 0.3 0.5 1 nm mW % % % dB 1.2 1/e2 full angle 2hrs, T= 25°C 0.7, 0.9, 1.5, 2.0, 4.0, 6.0 1 5 1 1, 2, 3 SM / PM 3 0.12 3 9 3 10 2 200 0.2 ACC 0% ~ 100% output power mm mrad urad urad/°C m um mm Features  Plug & Play  ESD Protection  Power Adjustable  LD Current Full Protection  LD Temperature Stabilized  Compact Size Applications V W A mA °C  Polarization Maintaining Fiber  High Speed Modulation  Remote Control  Collimated & Focused Beam  Metal Jacket Protection R01.20090331 Fiber Coupled Laser Module FCLM670 Series Mechanical Drawing / Package Dimensions (dimension in mm) 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. FCLM 6 7 0 Wavelength 670 nm= 670 Control Type Local = L Remote = R Connector Type None = 1 FC/PC = 2 FC/APC = 3 Power Output 5mW = 5 Operation Type DC = D Modulation = M Fiber Length Beam Size 0.7mm = 1 0.9mm = 2 1.5mm = 3 2.0mm = 4 4.0mm = 5 6.0mm = 6 None = 0 1 Meter 3mm Cable = 1 3 Meter 3mm Cable = 2 1 Meter Metal Jacket = 3 3 Meter Metal Jacket = 4 2 Meter 3mm Cable = 5 2 Meter Metal Jacket = 6 Fiber Type Single Mode = S Polarization Maintain = P This component does not comply with the Federal Regulations (21 CFR Subchapter1 ) as administered by the Center for Devices and Radiological health. Purchaser acknowledges that his/ her products must comply with these regulations before they can be sold to a customer. The output light from this product is harmful to a human body even if it is invisible. Avoid looking at the output of this product directly, or through a lens during operation. Observance of operation should be through a TV camera or related equipment. Refer to IEC 825-1 and 21 CFR 1040.101040.11 as a radiation safety standard for laser products. Oplink follows a policy of continuous product improvement. Specifications are subject to change without prior notice. The module’s warranty is 1 year. R01.20090331 Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules