LLCC21012C

Green Low Loss CWDM LLCC Series Product Description Oplink’s Green Low Loss Coarse Wavelength Division Multiplexer is designed to meet industrial stringent size and loss requirement. Based on Thin-Film-Filter (TFF) and Micro-optics, this low loss CWDM features small form factor, ultra low insertion loss, high channel isolation, and unparallel reliability. The technology is a lead-free packaging platform and no epoxy in the optical path. The Green Low Loss CWDM is Telcordia GR-1221and GR-1209 qualified, and complied with industry green initiatives such as RoHS and WEEE. Performance Specificationns LLCC Series Min Typical Max Unit Features Center Wavelength λC Channel Spacing Channel Passband 1310 Upgrade Passband 4ch CWDM Insertion Loss within Passband 1) 8ch CWDM CWDM Upgrade (4ch CWDM only) 1310 Upgrade Passband Ripple Adjacent Channel Isolation Non-adjacent Channel Isolation 1310 Upgrade Isolation over CWDM Bands CWDM Upgrade Isolation over CWDM Bands (4ch CWDM only) Return Loss Directivity Polarization Dependent Loss (PDL) Polarization Mode Dispersion (PMD) Operating Power Operating Temperature Storage Temperature Fiber Type Package Dimensions Standard (250 or 900µm fiber jacket) 3) Refer to Channel Plan Below 20 13 1260 0.8 1.0 1.0 0.6 0.3 30 45 40 13 45 55 0.20 0.20 300 -5 to +70 -40 to +85 Corning SMF-28 58.0 x 30.0 x9.6 52.0 x 27.5 x 7.6 40 50 45 15 50 15 1360 1.0 1.5 1.3 0.8 0.5 nm nm nm nm  Small Form Factor  Environmental Green Plan Compliance  Ultra-Low Insertion Loss  High Reliability  High Channel Isolation  Epoxy-Free Optical Path  RoHS 6 Compliant dB dB dB dB dB dB dB dB dB ps mW °C °C Applications  WDM System for Metro/Access Market Compact (250µm fiber jacket only) mm Notes: [1] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. [2] All the parameters are without connectors. [3] The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified Channel Plan 1471.0 1491.0 1511.0 1531.0 1551.0 1571.0 1591.0 1611.0 R04.20081119 Green Low Loss CWDM LLCC Series Mechanical Drawing / Package Dimensions (dimension in mm) Standard Package Compact Package 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com Note: port assignment will vary due to different configuration, please contact Oplink’s sales department for further information. Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. LLCC 2 0 0 Spacing 20 nm = 2 1310 Upg Port W/O Upg = 0 W/ Upg = 1 CWDM Upg Port 8ch CWDM = 0 4ch W/O Upg = 1 4ch W/ Upg = 2 Fiber Length* 0.5 meter= H 1.0 meter= 1 1.5 meter= 5 2.0 meter= 2 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A Fiber Jacket 250 μm bare fiber = 1 900 μm loose tube = 2 Package Channel Plan Standard package = S Compact package = C 8ch CWDM=00 4ch CWDM 1471~1531 = 01 4ch CWDM 1551~1611 = 02 4ch CWDM 1511~1571 = 03 4ch CWDM 1471/14911/1591/1611 = 04 *The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R04.20081119 Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules